Dotlux CASAMBI wall switch 4-fold battery-free

Network frequency: 50 Hz, Voltage range: 220-240 V, TcMax: 75 °C, TaMin: -20 °C, TaMax: 50 °C, Degree of protection: IP20, Protection class: II Insulation protection, Application area: Indoor, Length: 57 mm, Width: 36 mm, Height: 22 mm, Weight: 48 g, Article type: Control, Type of current: AC, Radio frequency: 2402 hz, Dimming: Casambi dimming

Network frequency: 50/60 Hz, Voltage range: 85-240 V, TcMax: 75 °C, TaMin: -20 °C, TaMax: 45 °C, Storage temperature range: -25-75 °C, Degree of protection: IP20, Protection class: II Protective insulation, Application area: Indoor, Length: 40 mm, Width: 36 mm, Height: 14 mm, Weight: 15 g, Article type: Control, Type of current: AC, Max. Output: 100 W, Radio frequency: 2402 hz, Connection type: Socket, Dimming: Casambi dimmingEAN/GTIN: 7350030771351

Article type: ControlEAN/GTIN: 7350030774017

Voltage range: 9.5-22.5 V, TcMax: 65 °C, TaMin: -20 °C, TaMax: 55 °C, Storage temperature range: -25-75 °C, Protection class: IP20, Protection class: II Insulation, Application area: Indoor, Length: 40 mm, Width: 36 mm, Height: 14 mm, Weight: 15 g, Article type: Control, Current type: DC

Article type: Control, Primary housing color: blackEAN/GTIN: 7350030779166

Article type: Control, Primary housing color: signal whiteEAN/GTIN: 7350030779098

Article type: Control, Primary housing color: pure whiteEAN/GTIN: 7350030779081

4-channel PWM dimmer for 12V or 24V, for convenient control of lights via the CASAMBI app. The dimmer is installed between the non-dimmable 12–24 VDC ballast and the constant-voltage product. Suitable for single-colour strips, COLORselect strips, RGB and RGBW strips. The maximum output current is 6A, which can be freely distributed across channels 1–4. Protected against: overload, overcurrent and short circuit. Various pre-installed profiles can be selected in the CASAMBI app. Compatible with the sensor (item no. 5117), wireless remote control (item no. 5120) and wall switch (item no. 5121) Full control via the CASAMBI app: Adjusting brightness and light colour; configuring lights and lighting networks; creating scenes and animations (colour transitions); intelligent timer and gallery functionsOutput voltage: 12–24 V, Protection rating (IP): IP20, Length: 73 mm, Width: 30 mm, Height: 18 mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4260629149108

CASAMBI to DALI GatewayIdeal for DALI group control (max. 64 DALI devices with DALI power supply Art. 5119)Up to 250 DALI devices per interface depending on the DALI power supply (max. 250mA = 249 devices)Wired DALI interface for comfortable control of DALI light sources via Casambi AppSuitable for integrating a conventional DALI sensor into the CASAMBI worldPassive device, external power supply via DALI line necessary!Compatible with DALI power supply (Art. No. 5119)Compatible with sensor (Art. No. 5117), radio remote control (Art. No. 5120) and wall switch (Art. No. 5121)Various pre-installed profiles are selectable in CASAMBI AppControl of DALI components via CASAMBIControl of CASAMBI components via DALIDALI individual addressing or DALI group control/broadcastComplete control via CASAMBI App: Control of brightness and light colorConfiguration of light fittings and light fitting networksCreation of scenes and animations (color gradients)Intelligent timer and gallery functionsDegree of protection (IP): IP20, Length: 40mm, Width: 36mm, Height: 14mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4260629149115

PIR motion and light sensor for convenient control of lights via the CASAMBI app, including baffles to optimise the sensor’s detection range; sturdy mounting brackets ensure a secure hold. Mounting height: max. 4m (ceiling mounting). Detection range: Max. 10 x 4 m (ceiling mounting) Compatible with surface-mounted housing (Item No. 5118) Mains power supply Full control via the CASAMBI app: Presence/absence detection Ambient light-dependent control of lights/scenes Lighting duration and fade-in/fade-out times Various sensor functions available: 1. On/Off function for a pre-set scene via the sensor, followed by 0% brightness with an optional fade-out time 2. On/Off function for a pre-set scene via the sensor with adjustable afterglow duration/brightness and optional fade-in/fade-out times 3. Deactivation of manual control and control via sensor onlyControl type: other, Input voltage: 220–240 V, Protection rating (IP): IP20, Length: 56 mm, Width: 85 mm, Height: 85 mm, Diameter: 85 mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4260629149139

Wireless remote control with 8 buttons for convenient control of lights via the CASAMBI app. Designed for wall mounting; detachable from the magnetic base plate. The remote control features four pre-programmed buttons (brighter – dimmer, warm/cool white) The remote control has four individually programmable buttons (individual lights, groups, scenes, animations...) The individual buttons are programmed via the CASAMBI app. Range: max. 50m in open space, including magnetic wall mount. Battery life: approx. 2–5 years depending on usage. 1x CR2430Length: 90mm, width: 90mm, height: 12 mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4260629149153

Interface for convenient control of DALI or 1-10V lights via the CASAMBI app (max. 2 DALI devices), suitable for retrofitting a single DALI or 1-10V light (Single-luminaire control) suitable for integrating a conventional push-button or a DALI sensor into the CASAMBI ecosystem; compatible with the sensor (item no. 5117), wireless remote control (item no. 5120) and wall switch (item no. 5121). Full control via the CASAMBI app: Adjusting brightness and light colour; configuring luminaires and luminaire networks; creating scenes and animations (colour transitions); intelligent timer and gallery functions. Sends to the DALI addresses: 0, 1, 2, 3 (depending on the channels). Addressing cannot be adjusted via the app. Devices must have these addresses pre-set. Changing fixtures before pairing with the network: Change profile. Switched mains output 230V max. 0.6A: Can be used to avoid standby currents or to enable the connected devices to be switched off completely at 0% dimming via the Casambi app. A relay suitable for the power to be switched MUST always be used for this purpose.1–10 V dimming: Yes, Manufacturer-specific dimming: Yes, No dimming function: No, Protection rating (IP): IP20, Length: 57 mm, Width: 36 mm, Height: 23 mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: Yes, RF dimming: YesEAN/GTIN: 4260712970053

LED dimmer for comfortable control of light fittings via CASAMBI app using phase-cut signal (max. 100W)Control the brightness of incandescent lamps, dimmable LED lamps and control gear for LEDs and halogen lamps (not for magnetic transformers)Suitable for retrofitting phase-cut dimmable light fittings (group control)Compatible with sensor (item no. 5117), remote control (item no. 5120) and wall switch (item no. 5121)Complete control via CASAMBI app:Configure light fittings and light fitting networksCreate scenes and animations (color gradients)Intelligent timer and gallery functionsSuitable for outdoor use: No, Type of control: Phase-cut, Housing: Plastic housing, Surface-mounted: No, Recessed: Yes, DIN rail mounting: No, Input voltage: 100-240V, Degree of protection (IP): IP20, Length: 41mm, Width: 37mm, Height: 14mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: Yes, IFTTT support available: NoEAN/GTIN: 4255678606429

Hardware gateway for convenient control of up to 2 Casambi networks. Programming of gateway and site functionality via the Casambi app. Remote access via Ethernet or Wi-Fi. The gateway can be used for remote diagnostics, network monitoring or remote control. Range: max. 30m in open space. HDMI cable and mains adaptor included. USB mouse for easy set-up. External LTE antennaBus system KNX: No, KNX wireless bus system: No, Funkbus system: No, LON bus system: No, Powernet bus system: No, Version: Multi-interface, Mounting type: Other, Tamper protection: No, With LED display: No, Updateable: Yes, Voltage type: AC, Protocol: Other, Provider-dependent: No, Visualisation: No, Wireless interface: Yes, Protection class (IP): IP20EAN/GTIN: 4255678602629

PIR motion and brightness sensor for comfortable operation of light fittings via CASAMBI AppMounting height: max. 17m (ceiling mounting) for wall mounting recommended height 1 to 2.2mExtra sensitive motion sensor with extended detection range: 10-20m see graphicsPower supply via the 220V mainsComplete control via CASAMBI App: presence/absence detectionambient light-dependent control of light fittings/scenesLight duration and fade-in/fade-out timesAssign the desired scenes to the sensor via appAutomatically switch light fittings/devices on and off after motion detectionIntegrated brightness sensor – light intensity as requiredAbsence setting – change of dimming level in absenceDay and night setting – individual light at certain times when motion is detectedThe motion detector can also be activated/deactivated via a switch or timerColor: white, nominal cross-section: 1.5mm²EAN/GTIN: 4260712973146

4-channel push-button interface for controlling CASAMBI-compatible devices within CASAMBI networks. Easy to programme using a tablet or smartphone (Apple, Android) with the CASAMBI app. 4 inputs for push-buttons (normally open) freely programmable Push-buttons must be isolated in accordance with the supply voltage (mains potential) Integrated antenna (illustration: grey area; do not cover with a metal casing) Suitable for installation in a flush-mounted boxType of accessory: Switch, Accessory: Yes, Spare part: No, Colour: blackEAN/GTIN: 4260712976277

Selectable operating mode: Push-button actuator, switching actuator for sensitive devices Wireless control via app, wall switch and motion detector Automatic on and off according to times, days of the week, date or sun times Group function Integration into scenes and animations iBeacon activatableSuitable for outdoor use: No, Programmable: Yes, Housing: Plastic housing, Assembly: Yes, Installation: Yes, DIN rail mounting: Yes, Output voltage: 100-240V, Input voltage: 100-240V, Degree of protection (IP): IP40, Protection class: II, Length: 120mm, Width: 50mm, Height: 33mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4260712979728

This pre-programmed tablet makes controlling the floodlights a breeze. Start the tablet and get going immediately. DOTLUX programs the tablet to be perfectly tailored to the individual needs of each customer. Predefined group switching of the individual floodlights. Timers for switching on and off. Individual control of each mast / floodlightSuitable for outdoor use: No, Type of control: Network, Programmable: Yes, Housing: Metal housing, Assembly: No, Installation: No, DIN rail mounting: No, Output voltage: 5V, Degree of protection (IP): otherwise, Length: 199mm, Width: 121mm, Height: 81mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4255678603701

Casambi 4-fold push-button for controlling floodlights Customised pre-programmed. plug&playSuitable for outdoor use: Yes, Type of control: Other, Programmable: Yes, Housing: Plastic housing, Structure: Yes, Installation: Yes, DIN rail mounting: No, Protection rating (IP): IP20, Protection class: II, Length: 136mm, Width: 102mm, Height: 57mm, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, EF016431: YesEAN/GTIN: 4255678603695