Powerful LED tubes for electromagnetic control gear (KVG/WG) and mains voltage, with UV filter. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Excellent filter below 500 nm. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). ENEC 10 VDE mark. Service life: up to 50,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Excellent UV filter. Very high switching strength. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: Microchip and semiconductor production. Applications where the UV and blue light content must be reduced to a minimum. Industry. Technical equipment: Replacement starter for LED tubes. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, rated current: 108mA, power factor: 0.90, lamp power: 23.00W, voltage type: AC, suitable for control gear: No, suitable for magnetic control gear: Yes, luminous flux: 2500lm, rated luminous flux according to IEC 62612: 2500lm, lamp luminous efficacy: 108lm/W, color rendering index CRI: 20-39, lamp shape: tube, double-ended, filament lamp: No, light color according to EN 12464-1: warm white <3300 K, base: G13, color: yellow, color temperature: 2000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 26.70mm, length: 1513.00mm, degree of protection (IP): IP20, lamp designation: T8, min. number of switching operations: 200000, total harmonic distortion (THD): 6, weighted energy consumption in 1.000 hours: 23.00kWh, average rated service life: 50000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854271496

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter protection, for food presentation. Product features: Specifically adapted spectral light distribution (comparable to T8 FL NATURA 76). LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Food looks particularly fresh and appetizing without being "enhanced" in an unacceptable way. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. Energy saving of up to 74% (compared to T8 fluorescent lamp). Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. No sagging thanks to glass tube. Also suitable for operation at low temperatures. Areas of application: Food presentation in e.g. butcher shops, bakeries, supermarkets or meat processing plants. Suitable for ambient temperatures of -20 to +50° C. Technical equipment: Suitable for operation with lossless and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, rated current: 80mA, power factor: 0.90, lamp power: 17.90W, voltage type: AC, suitable for EVG: No, suitable for magnetic ballast: Yes, luminous flux: 1700lm, rated luminous flux according to IEC 62612: 1700lm, lamp luminous efficacy: 94lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, glass/covering finish: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 3300K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 26.70mm, length: 1513.00mm, degree of protection (IP): IP20, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1.000 hours: 18.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: No, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854045127

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter protection, for food presentation. Product properties: Specifically adapted spectral light distribution (comparable to T8 FL NATURA 76). LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Food looks particularly fresh and appetizing without being "enhanced" in an unacceptable way. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. Energy saving of up to 74% (compared to T8 fluorescent lamp). Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. No sagging thanks to glass tube. Also suitable for operation at low temperatures. Areas of application: Food presentation in e.g. butcher shops, bakeries, supermarkets or meat processing plants. Suitable for ambient temperatures of -20 to +50° C. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220V, rated current: 24mA, power factor: 0.90, lamp power: 5.20W, voltage type: AC, suitable for EVG: No, suitable for magnetic ballast: Yes, luminous flux: 500lm, rated luminous flux according to IEC 62612: 500lm, lamp luminous efficacy: 96lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, glass/covering design: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 3300K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 26.70mm, length: 603.00mm, degree of protection (IP): IP20, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1.000 hours: 6.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854044793

LED tubes with integrated microwave sensor for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Integrated motion detector with microwave technology. Automatic dimming to 20% light output after 5 minutes without motion detection. Automatic light switch-off 7 minutes after the last motion detection. Microwave sensor with 5.8 GHz. Motion detection of up to 5 m. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Energy saving of up to 67% compared to the conventional fluorescent lamp. Suitable for closed light fittings thanks to microwave technology. Very high switching strength. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Corridors, stairwells and parking garages. Warehouses. Halls and corridors. Logistics areas, traffic buildings and corridors. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Recommended maximum mounting height: 5 m. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, rated current: 88mA, power factor: 0.90, lamp power: 19.30W, voltage type: AC, suitable for EVG: No, suitable for magnetic control gear: Yes, luminous flux: 3100lm, rated luminous flux according to IEC 62612: 3100lm, lamp luminous efficacy: 160lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 4000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 26.70mm, length: 1513.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: C, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1.000 hours: 20.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: Yes, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854045066

LED tubes with integrated microwave sensor for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Integrated motion detector with microwave technology. Automatic dimming to 20% light output after 5 minutes without motion detection. Automatic light switch-off 7 minutes after the last motion detection. Microwave sensor with 5.8 GHz. Motion detection of up to 5 m. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Energy saving of up to 67% compared to the conventional fluorescent lamp. Suitable for closed light fittings thanks to microwave technology. Very high switching strength. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Corridors, stairwells and parking garages. Warehouses. Halls and corridors. Logistics areas, transport buildings and corridors. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Recommended maximum mounting height: 5 m. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 32mA, Power factor: 0.90, Lamp power: 6.80W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 161lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 7.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: Yes, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854044472

LED tubes with integrated microwave sensor for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Integrated motion detector with microwave technology. Automatic dimming to 20% light output after 5 minutes without motion detection. Automatic light switch-off 7 minutes after the last motion detection. Microwave sensor with 5.8 GHz. Motion detection of up to 5 m. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Energy saving of up to 67% compared to the conventional fluorescent lamp. Suitable for closed light fittings thanks to microwave technology. Very high switching strength. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Corridors, stairwells and parking garages. Warehouses. Halls and corridors. Logistics areas, traffic buildings and corridors. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Recommended maximum mounting height: 5 m. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 60mA, Power factor: 0.90, Lamp power: 13.10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2100lm, Rated luminous flux according to IEC 62612: 2100lm, Lamp luminous efficacy: 160lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 14.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: Yes, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854044960

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter protection, for food presentation. Product features: Specifically adapted spectral light distribution (comparable to T8 FL NATURA 76). LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Food looks particularly fresh and appetizing without being "enhanced" in an unacceptable way. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. Energy saving of up to 74% (compared to T8 fluorescent lamp). Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. No sagging thanks to glass tube. Also suitable for operation at low temperatures. Areas of application: Food presentation in e.g. butcher shops, bakeries, supermarkets or meat processing plants. Suitable for ambient temperatures of -20 to +50° C. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 11.60W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 94lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Glass/covering design: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 3300K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 12.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854045004

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof, for food presentation. Product features: Specifically adapted spectral light distribution (comparable to T8 FL NATURA 76). LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Glass lamp tube with shatterproof coating for applications e.g. in the food industry. ENEC 10 VDE mark. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Food looks particularly fresh and appetizing without being "enhanced" in an unacceptable way. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. Energy saving of up to 74% (compared to T8 fluorescent lamp). Shatterproof thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. No sagging thanks to glass tube. Also suitable for operation at low temperatures. Areas of application: Food presentation in e.g. butcher shops, bakeries, supermarkets or meat processing plants. Suitable for ambient temperatures of -20 to +50° C. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220V, rated current: 36mA, power factor: 0.90, lamp power: 7.90W, voltage type: AC, suitable for EVG: No, suitable for magnetic ballast: Yes, luminous flux: 750lm, rated luminous flux according to IEC 62612: 750lm, lamp luminous efficacy: 94lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, glass/covering finish: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 3300K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 26.70mm, length: 908.00mm, degree of protection (IP): IP20, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1.000 hours: 8.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854045226

Powerful LED tubes for electromagnetic control gear (KVG/WG) and mains voltage, and for applications with high ambient temperatures. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Very wide ambient temperature range: -20...+80°C. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Service life at 25 °C ambient temperature: up to 75,000 h. Service life at 80 °C ambient temperature: up to 17,500 h. Degree of protection: IP20. ENEC 10 VDE mark. Mercury-free and RoHS-compliant. Product advantages: Suitable for high ambient temperatures of up to +80°C. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+80°C. Lighting in industrial production. Industry. Technical equipment: Replacement starter for LED tubes. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Before installation, it is recommended to check whether the light fitting and in particular the sockets are in good condition and suitable to support the weight of the lamp. Only suitable for temperatures up to 80°C inside the light fitting. Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp-proof light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 66mA, Power factor: 0.90, Lamp power: 14.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2600lm, Rated luminous flux according to IEC 62612: 2600lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 120.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, No dimming function: Yes, Diameter: 28.00mm, Length: 1213.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Min. number of switching operations: 200000, Total harmonic distortion (THD): 14, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854258572

Powerful LED tubes for electromagnetic control gear (KVG/WG) and mains voltage, and for applications with high ambient temperatures. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Very wide ambient temperature range: -20...+80°C. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Service life at 25 °C ambient temperature: up to 75,000 h. Service life at 80 °C ambient temperature: up to 17,500 h. Degree of protection: IP20. ENEC 10 VDE mark. Mercury-free and RoHS-compliant. Product advantages: Suitable for high ambient temperatures of up to +80°C. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+80°C. Lighting in industrial production. Industry. Technical equipment: Replacement starter for LED tubes. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Before installation, it is recommended to check whether the light fitting and in particular the sockets are in good condition and suitable to support the weight of the lamp. Only suitable for temperatures up to 80°C inside the light fitting. Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp-proof light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 105mA, Power factor: 0.90, Lamp power: 22.10W, Voltage type: AC, Suitable for control gear: No, Suitable for magnetic control gear: Yes, Luminous flux: 4100lm, Rated luminous flux according to IEC 62612: 4100lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Glass/cover finish: Matt, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Beam angle: 120.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 28.00mm, Length: 1514.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Min. number of switching operations: 200000, Total harmonic distortion (THD): 12, Weighted energy consumption in 1,000 hours: 23.00kWh, Mean rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854258596

Powerful LED tubes for electromagnetic control gear (KVG/WG) and mains voltage, and for High Bay applications. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Narrow beam angle: 90°. Rotatable end caps. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). ENEC 10 VDE mark. Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Very high illuminance compared to standard LED tubes. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Warehouse areas (high-bay warehouses). Lighting in industrial production. Industry. Technical equipment: Replacement starter for LED tubes. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 66mA, Power factor: 0.90, Lamp power: 14.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2600lm, Rated luminous flux according to IEC 62612: 2600lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Beam angle: 90.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, Without dimming function: Yes, Diameter: 28.00mm, Length: 1213.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Min. Number of switching operations: 200000, Total harmonic distortion (THD): 11, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854258633

High-performance LED tubes for electromagnetic ballasts (KVG/WG) and mains voltage, and for high-bay applications. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Narrow beam angle: 90°. Rotatable end caps. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). ENEC 10 VDE mark. Service life: up to 75,000 hours. Protection class: IP20. Mercury-free and RoHS-compliant. Product advantages: Very high illuminance compared to standard LED tubes. Very high switching durability. High luminous flux for demanding lighting applications. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 62% (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20 to +50°C. Warehouse areas (high-bay warehouses). Lighting in industrial production. Industry. Technical specifications: Replacement starter for LED tubes. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with an electronic ballast. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220V, Rated current: 105mA, Power factor: 0.90, Lamp power: 22.10W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 4100 lm, Rated luminous flux according to IEC 62612: 4100 lm, Lamp luminous efficacy: 185 lm/W, Colour rendering index (CRI): 80–89, Lamp type: tube, double-ended, filament lamp: No, glass/cover finish: frosted, light colour according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, Colour: white, Colour temperature: 4000 K, Housing colour: white, Beam angle: 90.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Non-dimmable: Yes, Diameter: 28.00 mm, Length: 1514.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Minimum number of switching cycles: 200,000, Total harmonic distortion (THD): 11, Weighted energy consumption over 1,000 hours: 23.00 kWh, Average rated service life: 75,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854258671

Powerful LED tubes for electromagnetic control gear (KVG/WG) and mains voltage, with UV filter. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Excellent filter below 500 nm. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). ENEC 10 VDE mark. Service life: up to 50,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Excellent UV filter. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: Microchip and semiconductor production. Applications where the UV and blue light content must be reduced to a minimum. Industry. Technical equipment: Replacement starter for LED tubes. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Installation in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 85mA, Power factor: 0.90, Lamp power: 18.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2000lm, Rated luminous flux according to IEC 62612: 2000lm, Lamp luminous efficacy: 111lm/W, Color rendering index CRI: 20-39, Lamp shape: Tube, double-ended, Filament lamp: No, Light color according to EN 12464-1: warm white <3300 K, Base: G13, Color: yellow, Color temperature: 2000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Lamp designation: T8, Min. number of switching operations: 200000, Total harmonic distortion (THD): 7, Weighted energy consumption in 1,000 hours: 18.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854271472

Product advantages: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. High overvoltage protection: up to 6 kV (L-N). The LED tube can be rotated up to 90° to either side thanks to rotatable end caps. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. For particularly homogeneous illumination. Service life up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliantTechnical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 14 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Rated current: 64 mA, Type of current: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 116, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 12, Max. Number of lamps on LS switch B16 A: 100, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 187, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor ?: 0.90, Surge voltage strength (L – N): 6 kVPhotometric data: Luminous flux: 2300 lm, Luminous efficacy: 164 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ±5 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 191.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at measuring point tc: 68 °C, Operating temperature according to IEC 62717: 39 °CService life: Service life L70/B50 at 25 °C: 100000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ≥ 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 14.00 kWh/1000h, Degree of protection: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData ge

Product advantages: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. High surge protection: up to 6 kV (L-N). The LED tube can be rotated up to 90° to either side thanks to rotatable end caps. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. For particularly homogeneous illumination. Service life up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliantTechnical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 22.1 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Rated current: 100 mA, Type of current: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 12, Max. Number of lamps on LS switch B16 A: 100, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor ?: 0.90, Surge voltage strength (L – N): 6 kVPhotometric data: Luminous flux: 3700 lm, Luminous efficacy: 167 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ±5 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1513.00 mm, Length with base but without base pin: 1500.00 mm, Diameter: 26.00 mm, Product weight: 264.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at measuring point tc: 82 °C, Operating temperature according to IEC 62717: 49 °CService life: Service life L70/B50 at 25 °C: 100000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ≥ 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 23.00 kWh/1000h, Degree of protection: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData

Product benefits: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to the glass tube. Splinter protection thanks to a special PET coating. Supports the implementation of HACCP principles from production right through to product display. Very high switching durability. High luminous flux for demanding lighting tasks. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 62 per cent (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in ballast-operated luminaires or at mains voltage. High surge protection: up to 6 kV (L-N). Thanks to rotatable end caps, the LED tube can be rotated by up to 90° to either side. Low flicker in accordance with EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Glass lamp tube with shatter protection for applications such as in the food industry. ENEC 10 VDE mark. For particularly uniform illumination. Service life of up to 100,000 h. Protection class: IP20. Mercury-free and RoHS-compliantTechnical specifications: Suitable for use with low-loss and conventional ballastsLegal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Electrical data: Rated power: 22.1 W, Rated voltage: 220–240 V, Operating mode: magnetic ballast/electronic ballast, Mains voltage, Rated current: 100 mA, Current type: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, DC input voltage: 186–260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on circuit breaker B10 A: 80, Max. number of lamps on circuit breaker B10 A – KVG/VVG without compensation: 80, Max. number of lamps on circuit breaker B10 A – KVG/VVG with compensation: 12, Max. number of lamps on circuit breaker B16 A: 100, Max. number of lamps on circuit breaker B16 A – KVG/VVG without compensation: 120, Max. number of lamps on circuit breaker B16 A – KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor?: 0.90, Surge voltage withstand (L – N): 6 kVPhotometric data: Luminous flux: 4100 lm, Luminous efficacy: 185 lm/W, Luminous flux maintenance at the end of rated life: 0.70, Colour temperature (designation): Cool white, Colour temperature: 4000 K, Colour rendering index Ra: 80, Colour rendering: 840, Standard deviation of colour matching: ?5 sdcm, rated LLMF at 6,000 h: 0.80, flicker parameter (Pst LM): 1, stroboscopic effect parameter (SVM): 0.4Illumination data: Beam angle: 190°, Warm-up time (60 %): ‹ 0.50 s, Start-up time: < 0.5 sDimensions & weight: Overall length: 1,513.00 mm, Length including base but excluding base pin: 1,500.00 mm, Diameter: 26.00 mm, Product weight: 264.00 gTemperatures & operating conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the measurement point tc: 82 °C, Operating temperature according to IEC 62717: 49 °CService life: L70/B50 service life at 25 °C: 100,000 h, Number of switching cycles: 200,000, Luminous flux retention at end of service life: 0.70, Note: Lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Applications: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 23.00 kWh/1,000 h, Protection rating: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN 62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTICS DATA: Storage temperature range: -20…+80 °CData