Multiple surround plates offer you the possibility to combine several functions under one surround plate. You use these double flush surround plates from the Niko Pure series for two vertically aligned functions in a row. The centre distance between the fSpecifications:The complete flush surround plate is self-extinguishing (complies with a filament test of 650C°) and halogen-free. It consists of an upper frame and a lower frame that are mechanically connected. The upper frame is made of 6 mm-thick, black, anodized alum...

Description Rocker switch with 4 potential-free buttons, 24 V. These buttons are specially equipped with an LED lamp and a label. With these, you can conveniently operate various light points in one room or multiple rooms. By using the LED lamp, you can directly see whether the light source is activated or not. You can easily add a symbol on the label surface to mark your light points. Color: white. Specification Central plate for potential-free 4-way switch, 24 V, with LED and text field white. The two keys (1 per 2 push buttons) are pressed on top and bottom of the 4 potential-free push buttons and held in place on the base of the potential-free push button with snap hooks. On the back of the two keys, there are also two extensions that press on the push buttons of the base when the key is operated. The decorative plate with text field is mounted in the center and consists of two parts. The upper part functions as a transparent lens, the lower part holds the decorative plate and the label in place. Two labels are included with each central plate. Dimensions of the label (41 mm x 12 mm). Each key of the central plate is equipped with a rectangular, transparent lens. The central plate can be easily disassembled by pulling it out of the mechanism.Number of control buttons: 4 control buttonsDegree of protection: The assembly of a mechanism, a central plate and a cover is protected according to protection class IP41.Central plate material: The central plate consists of distortion-resistant polycarbonate and acrylonitrile styrene acrylate materials. The raw material is uniformly colored.Color: white (uniformly colored, approximately RAL9010)Impact resistance: After installation, impact resistance according to IK06 is ensured.The plastic parts of the central plate are self-extinguishing (withstand a glowing wire test of 650°C) and halogen-free.Dimensions of the version: 45 x 45 mm (HxW)

Complete device (mechanical assembly and finishing set) for a socket outlet with earth pin and safety shutter. This socket outlet has a flush-mounting depth of 21mm. Colour: White.

Description 1-gang frame from the Niko Original series. Color of the frame: Niko Original white. Specification 1-gang frame Niko Original white. Simple frame for one mechanism. The entire frame is self-extinguishing (withstands a glow wire test of 650°C) and halogen-free. The frame consists of distortion-resistant polycarbonate and acrylonitrile styrene acrylate materials.Color: white (uniformly colored, approximately RAL9010)Height: max. 8,5 mmDimensions (HxWxD): 83 x 83 x 8,9 mmCertification marks: CEBEC, ÖVE, KEMA, VDE, NF, SEMKOMarking: CE

SpecificationDimensions (HxWxD): 73 x 73 x 407 mmCertifications: ÖVE, KEMA, VDE, SEMKOSocket for protected socket-outlet, installation depth 28,5 mm 16 A/250 Vac, push-in terminals. The connection terminals are equipped with push-in terminals to clamp the wires. The wall socket has a high-quality brass edge grounding. All connection terminals are located on the top of the base and are suitable for accommodating 2 single conductors (2,5 mm²). The stripping length (14 mm) of the wires is permanently marked on the back of the base. For mounting in a flush-mounted box with gripping surfaces, claws are used, which are tightened using screws with universal screw head (Pz2 or slot 1 x 5,5 mm). The claws, which have a gripping depth of 23,5 mm, return to their original position when unscrewed. The mounting frame has a metal thickness of 1 mm and is brightly galvanized on all sides after cutting, including the cut edges. On horizontal and vertical axes, the mounting frame has 4 screw slots for screw mounting in flush-mounted boxes. These screw slots have a screw hole with a diameter of 7 mm. For mounting on panels, the mounting frame is equipped with 4 screw holes (marked with a screw symbol) with a diameter of 3 mm. The center of the mounting frame is marked both in the horizontal and vertical direction (guide line, laser ...) so that the mounting of one or more mechanisms can be carried out quickly and easily. On all sides, the base has folded swallowtails, making it possible to quickly and smoothly connect several bases both horizontally and vertically (center distance 71 x 71 mm). The folded edges on the outside of the base and the continuation inward provide additional robustness. The 4 rectangular openings (7 x 2,5 mm) in the mounting frame can, if the flush-mounted box protrudes from the plaster, bridge a clearance of 1 to 1,2 mm. With such a clearance, the cover can still fit snugly against the wall.Degree of Protection: The assembly of a mechanism, a central plate, and a cover is protected to degree of protection IP41.Installation depth: 28,5 mmCertifications: ÖVE, KEMA, VDECentral plate for protected socket-outlet with integrated raised touch protection, white. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering, the cover can always be mounted flush against the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks can bridge a clearance of 1 to 1,2 mm

Compound outlet (base and central plate) in Niko Original White is without earthing. The base is equipped with screw terminals and claw fixing. The socket outlet also has a safety shutter and a flush-mounting depth of 21mm....

Description Rocker for single push-button with transparent text field. You can easily add a short label or symbols to the transparent text field. Color: white. Specification Central plate for electronic single switch or push-button, white. The button and the center disc (edge) form a unit. The central plate is equipped with a transparent text field where you can apply simple short markings or symbols. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering work, the cover remains tightly attached to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks bridge a clearance of 1 to 1.2 mm

Description 3-fold frame with 71 mm center spacing from the series color finish cover: Niko Intense white. Specification 3-fold frame with 71 mm center spacing Niko Intense white. Triple cover for three mechanisms. The entire cover is self-extinguishing (withstands a glow wire test of 650°C) and halogen-free. Consists of an upper frame and a lower frame, which are mechanically connected to each other. The lower frame is made of white polycarbonate + ASA.Construction height: max. 8,5 mmDimensions (HxWxD): 83 x 225 x 8,9 mmCertification marks: CEBEC, ÖVE, KEMA, VDE, NF, SEMKOMarking: CE

Description:Mechanism for a two-pole, two-way switch. Two-way switches are used to operate one light fitting from two different locations. A finishing set in the colour of your choice must be ordered separately.Specification:The mechanism is equipped with block-shaped, silver contacts (cadmium-free) with a cruciform arrangement and cage clamps with permanent screws. These screws have combination screwheads (Pz1 slot 1x5 mm). Moreover, every screw is equipped with a screwdrive.

Description 2-way frame with 71 mm center spacing from the series color finish cover: Niko Intense white. Specification 2-way frame with 71 mm center spacing Niko Intense white. Double cover for two mechanisms. The entire cover is self-extinguishing (withstands a glow wire test of 650°C) and halogen-free. Consists of an upper frame and a lower frame, which are mechanically connected to each other. The lower frame is made of white polycarbonate + ASA.Construction height: max. 8,5 mmDimensions (HxWxD): 83 x 154 x 8,9 mmCertification marks: CEBEC, ÖVE, KEMA, VDE, NF, SEMKOMarking: CE

Description Central blind cover. Color: anthracite. Specification Blind cover, color: anthracite. The disassembly can be easily carried out by pulling the central plate out of the mechanism.Degree of protection: The assembly of a mechanism, a central plate and a cover is protected to degree of protection IP41.Central plate material: The central plate consists of distortion-resistant polycarbonate and ASA materials and is painted.Color: anthracite paintedImpact resistance: After installation, impact resistance according to IK06 is ensured.The plastic parts of the central plate are self-extinguishing (withstand a glow wire test of 650°C) and halogen-free.Dimensions of the version: 45 x 45 mm (HxW)Marking: CE

Description This button is used for the installation of a single-pole, double-pole, two-way or intermediate switch or for a push button. With this button, you can operate a light point.Color: white.Specification Central plate for electronic single-pole switch or push button, white. The button and the central disc (edge) form a unit. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering work, the cover is always tightly attached to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks bridge a clearance of 1 to 1.2 mm

Description The central plate is attached to a flush-mounted socket with a combination screw head (PZ 1-slot 1 x 5.5 mm). This central plate is surrounded by a flat edge, which is provided with a rectangular opening at all four corners, each containing a multi-positional snap hook. The construction of the central plate ensures that the frame is always flat against the wall, even if the plastering is not done neatly. white. Specification Central plate for socket with protective contact and integrated raised touch protection, white. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positional snap hook. The design of the central plate ensures that, even if the plastering is not done carefully, the cover can always be mounted close to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted socket protrudes from the plaster, the multi-positional snap hooks bridge a clearance of 1 to 1.2 mm

Description Mechanism for socket outlet with protective contact, claw mounting and integrated enhanced touch protection. The connection terminals are equipped with push-in terminals to clamp the wires. This socket has an installation depth of 28.5 mm. Central plate and frame in the color of your choice must be ordered separately. Specification Base for socket outlet with protective contact, installation depth 28.5 mm 16 A/250 Vac, push-in terminals. The connection terminals are equipped with push-in terminals to clamp the wires. The wall socket has a ground connection made of high-quality brass. All connection terminals are located on the base top and are suitable for accommodating 2 single wires (2.5 mm²). The stripping length (14 mm) of the wires is permanently marked on the base back. Claws are used for mounting in a flush-mounted box with gripping surfaces, which are tightened using screws with universal screw head (Pz2 or slot 1 x 5.5 mm). The claws, which have a grip depth of 23.5 mm, return to their original position when unscrewed. The installation frame has a metal thickness of 1 mm and is brightly galvanized on all sides after cutting, including on the cut edges. At the height of the horizontal and vertical axes, the installation frame has 4 screw slots for screw mounting in flush-mounted boxes. These screw slots have a screw hole with a diameter of 7 mm. For mounting on panels, the installation frame is equipped with 4 screw holes (marked with a screw symbol) with a diameter of 3 mm. The center of the installation frame is marked both in the horizontal and vertical direction (guide line, laser ...) so that the installation of one or more mechanisms can be carried out quickly and easily. On all sides, the base has folded swallowtails, making it possible to quickly and smoothly connect several bases both horizontally and vertically (center-to-center distance 71 x 71 mm). The folded edges on the outside of the base as well as the continuation inward provide additional robustness. The 4 rectangular openings (7 x 2.5 mm) in the installation frame can bridge a clearance of 1 to 1.2 mm if the flush-mounted box protrudes from the plaster. With such a clearance, the cover can still fit snugly against the wall. Degree of protection: The assembly of a mechanism, a central plate and a cover is protected to degree of protection IP41. Installation depth: 28.5 mm Test mark: ÖVE, KEMA, VDE