LED replacement for HID lamps for hall light fittings. Product features: Protection class: IP40. High surge protection: up to 4 kV (L-N). Product advantages: Direct replacement for conventional HQI and NAV lamps thanks to KVG and ignition device compatibility. Up to 68 % energy savings when replacing conventional HQI lamps. Effective thermal management for wide operating temperature range. Low maintenance due to long service life. Instant 100 % light, no warm-up time. Areas of application: LED alternative for applications with high luminous flux requirements. Industrial and warehouse areas. Outdoor applications only in suitable light fittings. Technical equipment: Fuse cable for the lamp included.Rated voltage: 110V, Rated current: 2.3mA, Power factor: 0.70, Lamp power: 95.00W, Voltage type: AC, Luminous flux: 13000lm, Rated luminous flux according to IEC 62612: 13000lm, Lamp luminous efficacy: 136lm/W, Color rendering index CRI: 80-89, Lamp shape: Reflector, Filament lamp: No, Design glass/cover: clear, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E40, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 120.00°, Color consistency (McAdam ellipse): SDCM6, Dimmable: No, Diameter: 230.00mm, Length: 310.00mm, Protection class (IP): IP40, Energy efficiency index (EEI): 0.11, Energy efficiency class: E, Min. Number of switching operations: 100000, Weighted energy consumption in 1.000 hours: 105.00kWh, Average rated service life: 50000h, Remote control possible: No, With remote control: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: NoEAN/GTIN: 4058075612631

Overvoltage protection up to 4,000 V No premature failures: SecureSolderConnect-Technology prevents hairline cracks and cold solder joints Unique: Integrated, temperature-dependent power regulation to 50% to protect against overheating AirFin-Cooling: 2.5 times larger cooling surface than comparable products and up to 20% reduced weight load on the lamp base Easy replacement through Retro-Fit E27 base for common HQL/NAV lamps Lamp can be operated without modification on HQL Voschlatgeräten and also directly at 230V. NAV control gear must be disconnected Optimally arranged LEDs enable uniform light distribution Lamp efficiency of up to 130 lm/W through the use of high-quality Lm80 certified LEDsPower factor: 0.9, Voltage type: AC, EF016553: No, Luminous flux: 2700lm, Rated luminous flux according to IEC 62612: 2700lm, Luminous intensity: 214.86cd, Color rendering index CRI: 80-89, Lamp shape: EV019361, Design glass/cover: without, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 3000K, Housing color: white, Color consistency (McAdam Ellipse): SDCM6, Phase-cut dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, EF018144: No, EF018145: No, Without dimming function: Yes, Diameter: 73mm, Length: 73mm, Degree of protection (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 1, Weighted energy consumption in 1,000 hours: 18kWh, Remote control possible: No, With remote control: No, EF000302: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629146480

Surge protection up to 4,000 V No premature failures: SecureSolderConnect technology prevents hairline cracks and cold solder joints Unique: Integrated, temperature-dependent power regulation to 50 per cent to protect against overheating AirFin cooling: 2.5 times larger cooling surface area than comparable products and up to 20 per cent reduced weight load on the lamp base Easy replacement thanks to the Retro-Fit E27 base for standard HQL/NAV lamps The lamp can be operated on HQL ballasts without modification and also directly from 230V. NAV ballasts must be disconnected. Optimally arranged LEDs ensure uniform light distribution. Luminous efficacy of up to 160 lm/W through the use of high-quality Lm80-certified LEDs . Power factor: 0.91, luminous intensity: 229.18 cd, colour rendering index (CRI): 80–89, light colour according to EN 12464-1: neutral white 3300 to 5300 K, base: E27, Colour: white, Colour temperature: 4500 K, Housing colour: white, Colour consistency (McAdam ellipse): SDCM6, Diameter: 73 mm, Length: 73 mm, Protection rating (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: D, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629146473

Surge protection up to 4,000 V No premature failures: SecureSolderConnect technology prevents hairline cracks and cold solder joints Unique: Integrated, temperature-dependent power regulation to 50% to protect against overheating AirFin cooling: 2.5 times larger cooling surface area than comparable products and up to 20% reduced weight load on the lamp base Easy replacement thanks to the Retro-Fit E27 base for standard HQL/NAV lamps. The lamp can be operated on HQL ballasts without modification and also directly from 230V. NAV ballasts must be disconnected. Optimally arranged LEDs ensure uniform light distribution. Luminous efficacy of up to 135 lm/W through the use of high-quality Lm80-certified LEDs. Power factor: 0.92, EF016553: No, luminous flux: 4200 lm, rated luminous flux according to IEC 62612: 4200 lm, luminous intensity: 334.23 cd, colour rendering index (CRI): 80–89, lamp shape: EV019361, Glass/cover design: none, Light colour according to EN 12464-1: warm white <3300 K, Base: E27, Colour: white, Colour temperature: 3000 K, Housing colour: white, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, EF018144: No, EF018145: No, Without dimming function: Yes, Diameter: 90 mm, Length: 90 mm, Protection rating (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: other, Weighted energy consumption over 1,000 hours: 28 kWh, Average rated lifespan: 35,000 h, Remote control possible: No, With remote control: No, EF000302: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629146442

For the first time, an LED lamp replaces the classic NAV light colour (approx. 2,100 K), which is often preferred for lighting in historic settings. Surge protection up to 4,000 V. No premature failures: SecureSolderConnect technology prevents hairline cracks and cold solder joints. Unique: Integrated, temperature-dependent power regulation to 50% to protect against overheating AirFin cooling: 2.5 times larger cooling surface area than comparable products and up to 20% reduced weight on the lamp base Easy replacement thanks to the Retro-Fit E27 base for standard HQL/NAV lamps. The lamp can be operated on HQL ballasts without modification and also directly from 230V. NAV ballasts must be disconnected. Uniform light distribution thanks to optimally arranged LEDs. Luminous efficacy of up to 140 lm/W through the use of high-quality lm80-certified LEDs. Power factor: 0.9, voltage type: AC/DC, EF016553: No, luminous flux: 2520 lm, rated luminous flux according to IEC 62612: 2520 lm, luminous intensity: 200.54 cd, colour rendering index (CRI): 80–89, Lamp type: EV019361, Glass/cover design: none, Light colour according to EN 12464-1: warm white <3300 K, Base: E27, Colour: white, Colour temperature: 2100 K, Housing colour: white, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, EF018144: No, EF018145: No, Without dimming function: Yes, Diameter: 73 mm, Length: 73 mm, Protection rating (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: other, Min. Number of switching cycles: 1, Average rated lifespan: 35,000 hours, Remote control possible: No, With remote control: No, Weighted energy consumption over 1,000 hours: 18 kWh, EF000302: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629146541

Surge protection up to 4,000 V No premature failures: SecureSolderConnect technology prevents hairline cracks and cold solder joints Unique: Integrated, temperature-dependent power regulation to 50% to protect against overheating AirFin cooling: 2.5 times larger cooling surface area than comparable products and up to 20% reduced weight load on the lamp base Easy replacement thanks to the Retro-Fit E27 base for standard HQL/NAV lamps Optimally arranged LEDs ensure uniform light distribution The lamp can be operated on HQL ballasts without modification and also directly from 230V. NAV ballasts must be disconnected. Lamp efficiency of up to 160 lm/W thanks to the use of high-quality Lm80-certified LEDsPower factor: 0.91, Luminous intensity: 356.51 cd, Colour rendering index (CRI): 80–89, base: E27, colour: white, colour temperature: 4500 K, housing colour: white, colour consistency (McAdam ellipse): SDCM6, light colour according to EN 12464-1: neutral white 3300 to 5300 K, Diameter: 90 mm, Length: 90 mm, Protection rating (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: D, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629146435

IP65 waterproof nano-coating with fully encapsulated driver module; overvoltage protection up to 4,000 V; no premature failures: SecureSolderConnect technology prevents hairline cracks and cold solder joints; unique: Integrated, temperature-dependent power regulation to 50% to protect against overheating AirFin cooling: 2.5 times larger cooling surface area than comparable products and up to 20% reduced weight on the lamp base Easy replacement thanks to the Retro-Fit E27 base for standard HQL/NAV lamps The lamp can be operated on HQL ballasts without modification and also directly from 230V. NAV ballasts must be disconnected. Optimally arranged LEDs ensure uniform light distribution. Luminous efficacy of up to 130 lm/W through the use of high-quality Lm80-certified LEDs . Power factor: 0.9, luminous intensity: 214.86 cd, colour rendering index (CRI): 80–89, light colour according to EN 12464-1: warm white <3300 K, base: E27, Colour: white, Colour temperature: 3000 K, Housing colour: white, Colour consistency (McAdam ellipse): SDCM2, Diameter: 73 mm, Length: 73 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629146497

Up to 25% light energy savings compared to conventional LED street luminaires thanks to intelligent night-time dimming of the light ENEC certified Cost savings thanks to continued use of existing luminaires and their cabling Less light pollution Support of the human biorhythm Protection of nocturnal insect speciesPower factor: 0.9, Voltage type: AC, Colour rendering index CRI: 80-89, Lamp shape: Bulb shape, Glass/cover design: None, Light colour according to EN 12464-1: Warm white <3300 K, Base: E27, Colour: White, Colour temperature: 3000K, Housing colour: White, Colour consistency (McAdam ellipse): SDCM2, Dimming Zigbee: No, EF018144: No, EF018145: No, Without dimming function: No, Diameter: 73mm, Length: 73mm, Protection rating (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: D, Remote control possible: No, With remote control: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: NoEAN/GTIN: 4260629145469

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. Only suitable for temperatures up to 50°C inside the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections may only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 13.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 138lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 75.00mm, Length: 151.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 23, Weighted energy consumption in 1.000 hours: 13.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071737

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 135mA, Power factor: 0.90, Lamp power: 29.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 4000lm, Rated luminous flux according to IEC 62612: 4000lm, Lamp luminous efficacy: 137lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 76.00mm, Length: 172.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 29.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040702

LED replacement for high-pressure sodium vapor lamps for outdoor lighting. Product features: Very high efficiency of up to 185 lm/W. System power factor: > 0.7. Degree of protection: IP40. High surge protection: up to 4 kV (L-N). Long service life of up to 50,000 hours (L70B50). Product advantages: Direct retrofit for conventional high-pressure sodium vapor lamps (NAV): Operation with KVG/VVG, compensation capacitor and igniter without rewiring. Saves up to 52% energy when used as a replacement for NAV lamps. Additional cost savings thanks to compatibility with KVG with power reduction ("half-night switch"). Low maintenance effort and cost savings due to long service life. Similar light distribution to traditional NAV lamps. Areas of application: Roads. Area lighting. Pedestrian zones. Parks.Rated voltage: 85V, Rated current: 1.38mA, Power factor: 0.70, Lamp power: 65.00W, Voltage type: AC, Luminous flux: 12000lm, Rated luminous flux according to IEC 62612: 12000lm, Lamp luminous efficacy: 184lm/W, Color rendering index CRI: 70-79, Filament lamp: No, Glass/cover design: clear, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E40, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Dimmable: No, Diameter: 70.00mm, Length: 260.00mm, Degree of protection (IP): IP40, Energy efficiency index (EEI): 0.08, Energy efficiency class: C, Min. number of switching operations: 100000, Weighted energy consumption in 1.000 hours: 72.00kWh, Average rated service life: 50000h, Remote control possible: No, With remote control: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: NoEAN/GTIN: 4058075453821

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78 per cent energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100 per cent light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When fitted horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Only suitable for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 13.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 2000 lm, Rated luminous flux according to IEC 62612: 2000 lm, Lamp luminous efficacy: 153 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour temperature: 4000 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 75.00 mm, Length: 151.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 23, Weighted energy consumption over 1,000 hours: 13.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071751

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 160mA, Power factor: 0.90, Lamp power: 38.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 5400lm, Rated luminous flux according to IEC 62612: 5400lm, Lamp luminous efficacy: 142lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E40, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 90.00mm, Length: 202.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 10, Weighted energy consumption in 1.000 hours: 38.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071898

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78 per cent energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100 per cent light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When fitted horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Only suitable for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 265mA, Power factor: 0.90, Lamp power: 60.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 8100 lm, Rated luminous flux according to IEC 62612: 8100 lm, Lamp luminous efficacy: 135 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: E40, Colour temperature: 2700 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 120.00 mm, Length: 260.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 10, Weighted energy consumption over 1,000 hours: 60.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071935

Philips TrueForce Urban LED HPL lamps are an excellent LED alternative to HPL/HQL or SON/NAV discharge lamps for outdoor lighting. The TrueForce Urban LED HPL lamps offer high energy savings, significantly longer service lives and fast payback times compared to conventional HPL/SON lamps. The lamp size and burner position are modeled after conventional HPL/SON lamps, making them an ideal alternative. The TrueForce Urban LED HPL lamps are suitable for direct mains operation at 220-240V and for operation with magnetic control gear (KVG).Rated voltage: 220-240V, Color Rendering Index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: clear, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360°, Rated current: 186mA, Color consistency (McAdam ellipse): SDCM6, Dimmable: No, Diameter: 84mm, Length: 178mm, Degree of protection (IP): IP65, Energy Efficiency Index (EEI): 0.0954, Lamp designation: other, Energy efficiency class: D, Min. number of switching operations: 50000, Total harmonic distortion (THD): 0.16, Power factor: 0.95, Weighted energy consumption in 1,000 hours: 42kWh, Average rated service life: 50000h, Remote control possible: No, With remote control: No, Photobiological safety according to EN 62471: other, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: No, Lamp power: 42W, Voltage type: AC, Luminous flux: 6000lm, Rated luminous flux according to IEC 62612: 6000lm, Lamp luminous efficacy: 142lm/WEAN/GTIN: 8718699638245GPC/12NC: 929002006602

LED replacement for high-pressure sodium vapor lamps for outdoor lighting. Product features: Very high efficiency of up to 185 lm/W. System power factor: > 0.7. Degree of protection: IP40. High surge protection: up to 4 kV (L-N). Long service life of up to 50,000 hours (L70B50). Product advantages: Direct retrofit for conventional high-pressure sodium vapor lamps (NAV): Operation with KVG/VVG, compensation capacitor and igniter without rewiring. Saves up to 52% energy when used as a replacement for NAV lamps. Additional cost savings thanks to compatibility with KVG with power reduction ("half-night switch"). Low maintenance effort and cost savings due to long service life. Similar light distribution to traditional NAV lamps. Areas of application: Roads. Area lighting. Pedestrian zones. Parks.Rated voltage: 70V, Rated current: 590mA, Power factor: 0.70, Lamp power: 23.00W, Voltage type: AC, Luminous flux: 3600lm, Rated luminous flux according to IEC 62612: 3600lm, Lamp luminous efficacy: 156lm/W, Color rendering index CRI: 70-79, Lamp shape: other, Filament lamp: No, Design glass/cover: clear, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Dimmable: No, Diameter: 70.00mm, Length: 190.00mm, Degree of protection (IP): IP40, Energy efficiency class: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 25, Weighted energy consumption in 1.000 hours: 26.00kWh, Average rated service life: 50000h, Remote control possible: No, With remote control: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: NoEAN/GTIN: 4058075453685

LED replacement for HID lamps for outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings.Rated voltage: 220V, Rated current: 135mA, Lamp power: 29.00W, Voltage type: AC, Luminous flux: 3600lm, Rated luminous flux according to IEC 62612: 3600lm, Lamp luminous efficacy: 124lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: grey, Beam angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Dimmable: No, Diameter: 76.00mm, Length: 172.00mm, Degree of protection (IP): IP65, Energy efficiency class: E, Min. number of switching operations: 100000, Weighted energy consumption in 1.000 hours: 29.00kWh, Average rated service life: 50000h, Remote control possible: No, With remote control: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: NoEAN/GTIN: 4058075612433

LED replacement for HID lamps for outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings.Rated voltage: 220V, Rated current: 100mA, Lamp power: 21.50W, Voltage type: AC, Luminous flux: 3000lm, Rated luminous flux according to IEC 62612: 3000lm, Lamp luminous efficacy: 139lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Dimmable: No, Diameter: 76.00mm, Length: 145.00mm, Degree of protection (IP): IP65, Energy efficiency class: D, Min. number of switching operations: 100000, Weighted energy consumption in 1.000 hours: 22.00kWh, Average rated service life: 60000h, Remote control possible: No, With remote control: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: Yes, Compatible with Google Assistant: Yes, Compatible with Amazon Alexa: Yes, IFTTT support available: YesEAN/GTIN: 4058075765917

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High overvoltage protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 67mA, Power factor: 0.90, Lamp power: 14.50W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 124lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 56.00mm, Length: 138.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. Number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 15.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040603

LED replacement for HQL lamps for demanding outdoor lighting applications. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation on mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. High surge protection: up to 6 kV (L-N). Product benefits: Saves up to 78% energy when used as a replacement for mercury vapour lamps (HQL). Low maintenance requirements due to long service life. Immediate 100% light output, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor use only in suitable luminaires. Safety instructions: The lamp may be larger and heavier than the lamp it is replacing. Before installation, check that the luminaire – and in particular the socket – is suitable for supporting the weight of the lamp. Where possible, fit the safety cable supplied in the lamp’s packaging to the 90 W lamp types. Not suitable for use with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 67mA, Power factor: 0.90, Lamp power: 14.50W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 2000 lm, Rated luminous flux according to IEC 62612: 2000 lm, Lamp luminous efficacy: 137 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour: white, Colour temperature: 4000 K, Housing colour: white, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 56.00 mm, Length: 138.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 20, Weighted energy consumption over 1,000 hours: 15.00 kWh, Average rated service life: 60,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040627

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 190mA, Power factor: 0.90, Lamp power: 41.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 6000lm, Rated luminous flux according to IEC 62612: 6000lm, Lamp luminous efficacy: 146lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 80.00mm, Length: 195.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. Number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 41.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040740

LED replacement for HQL lamps for demanding outdoor lighting applications. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation on mains voltage without a ballast. Power factor: 0.9. Protection rating: IP65. High surge protection: up to 6 kV (L-N). Product benefits: Saves up to 78% energy when used as a replacement for mercury vapour lamps (HQL). Low maintenance requirements due to long service life. Immediate 100% light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor use only in suitable luminaires. Safety instructions: The lamp may be larger and heavier than the lamp it is replacing. Before installation, check that the luminaire – and in particular the socket – is suitable for supporting the weight of the lamp. Where possible, fit the safety cable supplied in the lamp’s packaging to the 90 W lamp types. Not suitable for use with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 190mA, Power factor: 0.90, Lamp power: 41.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 5400 lm, Rated luminous flux according to IEC 62612: 5400 lm, Lamp luminous efficacy: 131 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: E40, Colour: white, Colour temperature: 2700 K, Housing colour: white, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 80.00 mm, Length: 202.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 20, Weighted energy consumption over 1,000 hours: 41.00 kWh, Average rated service life: 60,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040764

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 135mA, Power factor: 0.90, Lamp power: 29.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3600lm, Rated luminous flux according to IEC 62612: 3600lm, Lamp luminous efficacy: 124lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 76.00mm, Length: 172.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 29.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040689

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 190mA, Power factor: 0.90, Lamp power: 41.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 5400lm, Rated luminous flux according to IEC 62612: 5400lm, Lamp luminous efficacy: 131lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 80.00mm, Length: 195.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 41.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040726