Compact light fitting with switch for single or light band applications. Product features: Built-in switch. Up to 10 light fittings can be connected to each other. Transparent end caps. Versions with luminous flux 400...1900 lm available. 5 different lengths available. High luminous efficacy: up to 112 lm/W. Glow wire test according to IEC 60695-2-12: 850 °C. Product advantages: Compact dimensions. Saves space due to compact dimensions. Seamless connection possibility with up to 10 light fittings per light band installation. Practical switch directly installed on the light fitting. Flicker-free light thanks to special electronic control gear. Flexible installation in 2 different angles through 2 mounting options. Flexible application through a wide range of available lengths from 300 to 1500 mm. Angular connection with included cable possible. Areas of application: Direct replacement for light fittings with fluorescent lamps. Indoor applications. Corridors, entrances, stairwells, living rooms, basements. Accent lighting. Public space. Cove lighting. Shelves, furniture integration or under-cabinet. Seamless light bands. Technical equipment: Equipped with power plug, cable connector and line connector for connecting further light fittings. Mounting material for wall and ceiling mounting included. Safety instructions: All electrical connections must only be carried out by qualified personnel. To reduce the risk of strangulation, the flexible supply line connected to the light fitting, if it is within arm's reach, must be mounted directly and firmly to the wall.Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Socket: none, Material: plastic, Housing color: white, Voltage type: AC, Rated voltage: 220-240V, Rated current: 0.06mA, Control gear: Electronic Ballast, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Rated life L70/B50 at 25 °C: 50000h, Constant light output control: No, Degree of protection (IP): IP20, Protection class: II, Light fitting with limited surface temperature D-mark: No, Covering the light fitting with thermal insulation material possible: No, Suitable for emergency lighting: No, Integrated emergency power supply: No, With switch: Yes, With motion detector: No, Max. System power: 8.00W, Rated luminous flux according to IEC 62722-2-1: 800lm, Light fitting luminous efficacy: 100, Color temperature: 3000K, Color rendering index CRI: 80-89, Power factor: 0.50, Adjustable color temperature: no, Adjustable luminous flux: no, Adjustable radiation angle: no, Width: 28.00mm, Height/Depth: 36.00mm, Length: 573.00mm, Type of wiring: with through wiring, Number of poles: 2, Type of connection: Screw terminal, Electrical connection with plug system: No, Operation via Bluetooth: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Energy efficiency class of the light source according to EU Directive 2019/2015: not requiredEAN/GTIN: 4058075106116

Compact light fitting with high luminous flux for single or light band applications. Product features: Replacement for conventional T8 or T5 light fittings. Up to 10 light fittings can be connected to each other. Transparent end caps. Linear Compact Batten can be connected at the beginning of the light band with wiring at the back. Versions with luminous flux 1000.2500 lm available. 4 different lengths available. High luminous efficacy: up to 100 lm/W. Glow wire test according to IEC 60695-2-12: 850 °C. Product advantages: Compact dimensions. Requires little space due to the compact dimensions. Seamless connection possibility with up to 10 light fittings per light band installation. High luminous flux up to 2500 lm. Seamless connection without visible cables when combined with Linear Compact Batten. Flicker-free light thanks to special electronic control gear. Angle connection with included cable possible. Flexible installation in 2 different angles through 2 mounting options. Flexible application through a wide range of available lengths from 600 to 1500 mm. Areas of application: Direct replacement for light fittings with fluorescent lamps. Indoor applications. Corridors, entrances, stairwells, living rooms, basements. Accent lighting. Public space. Cove lighting. Shelves, furniture integration or under-cabinet. Seamless light bands. Technical equipment: Equipped with power plug, cable connector and line connector for connecting further light fittings. Mounting material for wall and ceiling mounting included. Safety instructions: All electrical connections must only be carried out by qualified personnel. To reduce the risk of strangulation, the flexible supply line connected to the light fitting, if it is within arm's reach, must be mounted directly and firmly to the wall.Lamp: LED not replaceable, With lamp: Yes, Suitable for number of lamps: 0, Socket: none, Material: plastic, Housing color: white, Voltage type: AC, Rated voltage: 220-240V, Rated current: 0.08mA, Control gear: Electronic ballast, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Rated life L70/B50 at 25 °C: 50000h, Constant light output control: No, Degree of protection (IP): IP20, Protection class: II, Light fitting with limited surface temperature D-mark: No, Covering the light fitting with thermal insulation material possible: No, Suitable for emergency lighting: No, Integrated emergency power supply: No, With switch: No, With motion detector: No, Max. System power: 15.00W, Rated luminous flux according to IEC 62722-2-1: 1500lm, Luminous efficacy of light fitting: 100, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.50, Adjustable color temperature: no, Adjustable luminous flux: no, Adjustable radiation angle: no, Width: 24.00mm, Height/Depth: 36.00mm, Length: 873.00mm, Type of wiring: with through wiring, Number of poles: 3, Connection type: Screw terminal, Electrical connection with plug system: No, Operation via Bluetooth: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Energy efficiency class of the light source according to EU Directive 2019/2015: not requiredEAN/GTIN: 4058075106253

LED light fitting in white, with electronic control gear with LED converter, LED lifespan 100,000 h up to a light output reduction to 75% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5400 lm, light fitting luminous efficacy: 166 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON support rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: In case of application in chemically stressed ambient atmospheres or in outdoor areas, please contact your consultant. Dimensions: 1522 x 51 x 48 mm. Weight: 1.36 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 180 lm/W. Light fitting luminous flux: 3,860 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 80% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 171 lm/W. Light fitting luminous flux: 11,680 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enabling a 100% continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (surface-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 140 lm/W. Light fitting luminous flux: 3,620 lm. Color rendering Ra > 80, color temperature 4,000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19. All-in-one solution: light bar, lamp and reflector combined in a single product. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,000 x 60 x 85 mm Weight: 1.5 kg

Linear TECTON MIREL LED strip light made from profiled sheet steel, coated with white polyester resin paint. DALI-controllable luminaire (DALI only) with LED converter. LED service life: 100,000 hours until luminous flux drops to 85 per cent of the initial value. Colour tolerance (initial MacAdam): 3. Luminaire luminous efficacy: 145 lm/W. Luminaire luminous flux: 5,430 lm. Colour rendering index Ra > 80, colour temperature 4,000 K. LED strip light with 4 highly efficient mid-power LEDs per lens segment. Light distribution via a reflector-lens combination results in a unique light strip design and photometric advantages such as very low UGR values with a minimal light-emitting area. The lens-reflector combination enables an UGR < 19 and a luminance of < 3000 cd/m². All-in-one solution: light bar, light source and reflector combined in a single product. Base frame of the LED light strip made from sheet steel with a white polyester resin finish. 100% flexible, tool-free mechanical and electrical installation using CLIX technology with two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Luminaire wired without halogen components. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 173 lm/W. Light fitting luminous flux: 8230 lm. Symmetrically wide emitting light fitting (wide beam). Color rendering Ra > 80, color temperature 6500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 184 lm/W. Light fitting luminous flux: 8,510 lm. Symmetrically narrow-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 185 lm/W. Light fitting luminous flux: 8,550 lm. Shelf beam (shelf). Color rendering index > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product enable a 100% continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Mounted optic CG made of powder-coated aluminum in white consisting of two reflector wings to reduce the UGR value: TECTON C High-Efficiency UGR < 19 and TECTON C High-Output UGR < 22 is achieved. The CG optic is optimized for the TECTON C WideBeam light fittings. Mounting aid for mounted optic CG using Add-on Clip on the end caps of the LED lamp. Dimensions: 1498 x 84 x 2 mm Weight: 1 kg

Linear TECTON MPO LED light fitting with highly efficient 192 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 171 lm/W. Light fitting luminous flux: 6620 lm. Color rendering Ra > 80, color temperature 4000 K. Light direction via backlit multi-layer MPO micro prism optics to minimize perceived glare and UGR values. 12% indirect light for gentle ceiling illumination. Co-extruded hollow chamber profile with glued end caps (shatterproof up to IK06) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined. Dimming level for DC mode preset to 15%. Base carrier of the LED light fitting made of sheet steel, powder-coated in polyester resin, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +35°C. Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres please consult your advisor. Dimensions: 1522 x 104 x 151 mm. Weight: 4 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 183 lm/W. Light fitting luminous flux: 5430 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 162 lm/W. Light fitting luminous flux: 3,560 lm. Symmetrically wide emitting light fitting (wide beam). Color rendering Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light strip made of sheet steel, coated in polyester resin paint, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a light output reduction to 90% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 142 lm/W. Light fitting luminous flux: 2670 lm. Color rendering Ra > 80, color temperature 4000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19 and a luminance of < 3000 cd/m². All-in-one solution: light bar, lamp and reflector in a single product combined. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1000 x 60 x 85 mm Weight: 1.5 kg

Highly efficient LED light fitting insert LINEAtrack with CRI>92 has 158 Lm/Watt Fastest mounting through integrated track adapter Reuse of your existing track system Flexible phase selection and power adjustment directly in the light fitting Long service life thanks to oversized cooling and decoupled replaceable power supply Adjustable power through POWERselect 42W@6650 Lm = 158 Lm/Watt 50W@7840 Lm = 157 Lm/Watt 59W@9180 Lm = 156 Lm/WattSuitable for light band configuration: No, Lamp: LED replaceable, With lamp: Yes, Wall mounting: No, Suitable for pendant suspension: No, Suitable for ceiling mounting: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Suitable for surface mounting: No, Material of the housing: Aluminium, Programmable dimming: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Housing color: black, Design of the grid: matt, Dimming potentiometer (device-integrated): No, Office lighting suitable according to EN 12464-1: No, Surface protection housing: powder-coated, Material of the cover: plastic matt/satinized, Voltage type: AC, Rated voltage: 240V, Rated current: 350mA, Control gear: LED control gear current-controlled, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Light distribution: symmetrical/asymmetrical, Radiation angle: EV016214, Color consistency (McAdam ellipse): SDCM5, Light exit: direct, EF016835: not required, Rated service life L70/B50 at 25 °C: 100000h, Light flux maintenance at average service life 35,000 h at 25 °C ambient temp.: 85.34, Light flux maintenance at average service life 50,000 h at 25 °C ambient temp.: 80.01, Degree of protection (IP): IP20, Impact resistance: IK06, Max. Number of light fittings circuit breaker B16: 45, Max. Number of light fittings circuit breaker C16: 45, Protection class: I, Light fitting with limited surface temperature D-mark: Yes, Rated ambient temperature according to IEC62722-2-1: -20-40°C, Suitable for emergency lighting: No, Emergency power supply integrated: No, With motion detector: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Glow wire test according to IEC 60695-2-11: 650 °C - 30 s, Max. System power: 59W, Light fitting luminous efficacy: 158lm/W, Rated light flux according to IEC 62722-2-1: 9185.8lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 90-100, Power factor: 0.977, Constant light output control: Yes, Width: 64mm, Height/Depth: 65mm, Length: 1504mm, Type of wiring: Terminal, Total harmonic distortion (THD): 10, Photobiological safety according to EN 62471: RG1, Glare limitation (UGR): 22, Luminous intensity: 2922.08, Color temperature adjustable: no, Light flux adjustable: Steps, Radiation angle adjustable: no, Operation via Bluetooth: No, EF016431: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: No, EFNL0014: YesEAN/GTIN: 4255678601226

Linear office light fitting that can be flexibly adapted to any room architecture thanks to its modular modular design. Modular design allows easy connection of up to 13 units. Slim and timeless appearance fits almost any interior style. Various mounting options possible through suspension or ceiling mounting set. The light fittings can be installed almost without gaps to each other to create a continuous, uninterrupted light line. Support for the DALI standard for flexible light control.Suitable for light band configuration: Yes, Office workstation compliant according to EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Material of the housing: Aluminium, Housing color: black, Design of the grid: other, Type of voltage: AC, Control gear: not required, With control gear: No, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI: Yes, Dimming DALI-2: Yes, Dimming DMX: No, Programmable dimming: No, Dimming DSI: No, Dimming RF: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: No, Light distributor: Diffuser lens/-optics/-panel, Reflector: other, Light distribution: symmetrical/asymmetrical, Color consistency (McAdam ellipse): SDCM3, Light exit: direct, Direct/indirect components separately controllable: No, EF016835: not required, Rated service life L70/B50 at 25 °C: 120000h, Degree of protection (IP): IP20, Degree of protection (NEMA): other, Impact resistance: IK06, Protection class: I, Suitable for emergency lighting: No, Integrated emergency power supply: No, Max. System power: 45W, Light color: white, Light fitting light output: 120, Color temperature: 4000K, Color rendering index CRI: 80-89, Glare limitation (UGR): 19, Color temperature adjustable: Steps, Light flux adjustable: Steps, Emission angle adjustable: no, Width: 58mm, Height/Depth: 74mm, Length: 1418mm, Suspension included: Yes, Type of connection: other, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: No, Operation via Bluetooth: NoEAN/GTIN: 4255678605309

Support rail made of profiled steel sheet in black. 11 conductors embedded in an integrated power profile. 5 mains conductors (5 x 2.5mm²/16A) and 2 x 2 conductors (4 x 1.5mm²/10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm²/10A) as control line. Tool-free connection via electrical feed set. Dimensions: 1501 x 69 x 60 mm, Weight: 2.5 kg

Linear TECTON MPO LED light fitting with highly efficient 192 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 166 lm/W. Light fitting luminous flux: 8280 lm. Color rendering index Ra > 80, color temperature 4000 K. Light direction via backlit multi-layer MPO micro prism optics to minimize perceived glare and UGR values. 12% indirect light for gentle ceiling illumination. Co-extruded hollow chamber profile with glued end caps (shatterproof up to IK06) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined. Dimming level for DC mode preset to 15%. Base carrier of the LED light fitting made of sheet steel, powder-coated in polyester resin, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +35°C. Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1522 x 104 x 151 mm. Weight: 4 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 167 lm/W. Light fitting luminous flux: 7720 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear office light fitting that can be flexibly adapted to any room architecture thanks to its modular modular design concept. Modular design allows easy connection of up to 13 units. Slim and timeless appearance fits almost any interior style. Various mounting options possible through suspension or ceiling mounting set. The light fittings can be installed almost without gaps to each other to create a continuous, uninterrupted light line. Support of the DALI standard for flexible light control.Suitable for light band configuration: Yes, Office workstation suitable according to EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Material of the housing: Aluminium, Housing colour: black, Design of the grid: other, Type of voltage: AC, Rated voltage: 240V, Rated current: 45mA, Control gear: not required, With control gear: No, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI: Yes, Dimming DMX: No, Programmable dimming: No, Dimming DSI: No, Dimming RF: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: No, Light distributor: Diffuser lens/-optics/-panel, Reflector: other, Light distribution: symmetrical/asymmetrical, Colour consistency (McAdam ellipse): SDCM3, Light exit: direct, Direct/indirect components separately adjustable: No, EF016835: not required, Rated service life L70/B50 at 25 °C: 120000h, Failure rate at average usage duration of 50,000 h at 25 °C ambient temperature (tq): 50, Failure rate at average usage duration of 75,000 h at 25 °C ambient temperature (tq): 50, Degree of protection (IP): IP20, Degree of protection (NEMA): other, Impact resistance: IK06, Protection class: I, Suitable for emergency lighting: Yes, Emergency power supply integrated: No, Max. System power: 12W, Light colour: white, Light fitting light output: 120, Colour temperature: 4000K, Colour rendering index CRI: 80-89, Glare limitation (UGR): 19, Flicker value Pst LM: 1, Colour temperature adjustable: stepless, Light flux adjustable: stepless, Emission angle adjustable: no, Width: 204mm, Height/Depth: 74mm, Length: 204mm, Suspension included: No, Type of connection: other, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: No, Operation via Bluetooth: NoEAN/GTIN: 4255678605316

Linear office light fitting that can be flexibly adapted to any room architecture thanks to its modular modular design. Modular design allows easy connection of up to 13 units. Slim and timeless appearance fits almost any interior style. Various mounting options possible through suspension or ceiling mounting set. The light fittings can be installed almost without gaps to each other to create a continuous, uninterrupted light line.Suitable for light band configuration: Yes, Office lighting compliant with EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Material of the housing: Aluminium, Housing colour: black, Design of the grid: other, Voltage type: AC, Control gear: not required, With control gear: No, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI: No, Dimming DALI-2: No, Dimming DMX: No, Programmable dimming: No, Dimming DSI: No, Dimming RF: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Manufacturer-specific dimming: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Reflector: other, Light distribution: symmetrical/asymmetrical, Colour consistency (McAdam ellipse): SDCM3, Light exit: direct, Direct/indirect components separately controllable: No, EF016835: not required, Rated service life L70/B50 at 25 °C: 120000h, Degree of protection (IP): IP20, Degree of protection (NEMA): other, Impact resistance: IK06, Protection class: I, Suitable for emergency lighting: No, Emergency power supply integrated: No, Max. System power: 45W, Rated luminous flux according to IEC 62722-2-1: 5400lm, Light colour: white, Luminaire light output: 120, Colour temperature: 4000K, Colour rendering index CRI: 80-89, Glare limitation (UGR): 19, Colour temperature adjustable: Steps, Luminous flux adjustable: Steps, Emission angle adjustable: no, Width: 58mm, Height/Depth: 74mm, Length: 1418mm, Suspension included: Yes, Connection type: other, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: No, Operation via Bluetooth: NoEAN/GTIN: 4255678605279

Minimalistic light fitting with TECTON Adapter for easy and quick mounting of the light fitting on the TECTON LED light fitting system, with Microprism Optics, DALI controllable light fitting with LED converter, LED lifespan 100000 h up to a light output reduction to 90 % of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5400 lm, light fitting luminous efficacy: 122 lm/W. Color rendering index Ra > 90, color temperature 4000 K. Light direction via patented Curved Wave Guide light coupling and MPO-plus Micropyramid Structure Optics with multi-layer structure for defined coupling out with UGR < 19 and L< 3000 cd/m² at 65° for screen applications, device carrier made of white painted aluminum extruded profile, light fitting made of white aluminum extruded profile consisting of optics and TECTON C-profile, color matching the TECTON busbar configurable. Design end caps (available in different colors) are to be ordered separately. Light fitting halogen-free wired. Glow wire test: 650°C, Dimensions: 1512 x 152 x 48 mm, Weight: 7 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 172 lm/W. Light fitting luminous flux: 3,760 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.