Dotlux LED Surface Light SURFACE Ø250x62 11W 3000/4000/5700K COLORselect white

Quick and easy installation with EASYbase base plate and Twistlock closure
Large product variety enables use in all projects (e.g. sensor, exit, DALI etc.)
Product design through easily replaceable LED module and power supply
Rear and side cable entry with large cable storage space enable flexible on-site use
Ideal for residential construction projects through impact-resistant polycarbonate housing IK10
Modern, clear design with indirect light component
Splash-proof housing for outdoor, damp room and indoor areas
Individual light color adjustable via COLORselect (light color: 3,000 K / 4,000 K / 5,700 K)
Suitable for central battery

Suitable for light band configuration: Yes, Dimming DSI: No, Installation diameter: 250mm, Suitable for surface mounting: Yes, Wall mounting: Yes, Suitable for pendant suspension: No, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Office lighting compliant with EN 12464-1: No, Lamp: replaceable LED, With lamp: Yes, Housing material: plastic, Surface protection housing: untreated, Housing color: white, Cover material: structured plastic, Grid design: white, Power type: AC, Rated voltage: 240V, Rated current: 135mA, Control gear: LED control gear current-controlled, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: without, Light distribution: symmetrical, Radiation angle: extremely wide-beam >80°, Color consistency (McAdam ellipse): SDCM6, Light exit: direct/indirect, Protection class (IP): IP54, Protection class (NEMA): 2, Impact resistance: IK08, EF016835: not required, Rated service life L70/B50 at 25 °C: 100000h, Light flux maintenance at avg. service life 35,000 h at 25 °C ambient temp.: 90.9, Light flux maintenance at avg. service life 50,000 h at 25 °C ambient temp.: 88, Light flux maintenance at avg. service life 75,000 h at 25 °C ambient temp.: 75.61, Failure rate at avg. service life of 35,000 h at 25 °C ambient temp. (tq): 9.1, Failure rate at avg. service life of 50,000 h at 25 °C ambient temp. (tq): 12, Failure rate at avg. service life of 75,000 h at 25 °C ambient temp. (tq): 24.39, Max. number of light fittings circuit breaker B16: 213, Max. number of light fittings circuit breaker C16: 213, Protection class: I, Light fitting with limited surface temperature D-mark: Yes, Rated ambient temperature according to IEC62722-2-1: -20-45°C, Suitable for emergency lighting: Yes, Emergency power supply integrated: Yes, With motion detector: No, With light sensor: Yes, Installation height/depth: 61.5mm, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Glow wire test according to IEC 60695-2-11: 750 °C - 30 s, Suitable for lamp power: 11W, Max. system power: 11W, Light fitting luminous efficacy: 135lm/W, Rated light flux according to IEC 62722-2-1: 1495lm, Light color: blue, Color temperature: 3000-5700K, Color rendering index CRI: 80-89, Power factor: 0.9, Constant light output control: No, Width: 250mm, Height/Depth: 62mm, Length: 250mm, Outer diameter: 250mm, Installation length: 61.5mm, Installation width: 250mm, Type of wiring: Terminal, Conductor cross-section: 2.5mm², Connection type: plug terminal, Photobiological safety according to EN 62471: RG0, Glare limitation (UGR): 26, Luminous intensity: 475.87, Adjustable color temperature: Steps, Adjustable light flux: no, Adjustable radiation angle: no, Operation via Bluetooth: No, EF016431: No, Compatible with Apple HomeKit: No, Compatible with