HQL LED FILAMENT VALUE 5400LM 32W 827 E40

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). Instant 100 % light, no warm-up timeProduct properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: in indoor applications not to be used in enclosed light fittings. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Mains power factor ?: > 0.90, Surge voltage resistance (L – N): 2 kVPhotometric data: Luminous flux: 5400 lm, Rated luminous flux 90°: 5400 lm, Luminous efficacy: 168 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 2700 K, Color rendering index Ra: 80, Light color: 827, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 217.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the tc measuring point: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E27, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 5LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy efficiency labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E27, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up timeProduct properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: in indoor applications not to be used in enclosed light fittings. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Power factor ?: > 0.90, Impulse voltage strength (L – N): 2 kVPhotometric data: Luminous flux: 6000 lm, Rated luminous flux 90°: 6000 lm, Luminous efficacy: 187 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 217.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the tc measuring point: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E27, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E27, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). Instant 100 % light, no warm-up timeProduct properties: Replacement for HQL: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: not to be used in enclosed light fittings for indoor applications. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Power factor: > 0.90, Impulse voltage strength (L – N): 2 kVPhotometric data: Luminous flux: 6000 lm, Rated luminous flux 90°: 6000 lm, Luminous efficacy: 187 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 202.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the measurement point tc: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E40, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on Energy Efficiency Labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E40, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L