LED TUBE T8 EM V 1500 25.9W 840

Cost-effective LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use with mains voltage. Single and tandem operation with a conventional ballast (versions ? 0.9 m). Glass tube. Long service life of up to 50,000 hours. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 69% (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use in combination with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20…+45 °C. Corridors, stairwells and car parks. Warehouses. Cold stores and storage rooms. Domestic applications. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, Rated current: 60 mA, Power factor: 0.90, Lamp power: 11.6 W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 1260 lm, Rated luminous flux according to IEC 62612: 1260 lm, Luminous efficacy: 108 lm/W, Colour rendering index (CRI): 80–89, Lamp type: tube, double-ended, filament lamp: No, glass/cover finish: frosted, light colour according to EN 12464-1: warm white <3300 K, base: G13, colour: white, colour temperature: 3000 K, housing colour: white, beam angle: 190.00°, colour consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, phase-lead dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1061.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 12.00 kWh, Average rated lifespan: 50,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety in accordance with EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434525

Cost-effective LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use with mains voltage. Single and tandem operation with a conventional ballast (versions ? 0.9 m). Glass tube. Long service life of up to 50,000 hours. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 69% (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use in combination with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20…+45 °C. Corridors, stairwells and car parks. Warehouses. Cold stores and storage rooms. Domestic applications. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, Rated current: 60 mA, Power factor: 0.90, Lamp power: 11.6 W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 1,400 lm, Rated luminous flux according to IEC 62612: 1,400 lm, Lamp luminous efficacy: 120 lm/W, Colour rendering index (CRI): 80–89, Lamp type: tube, double-ended, filament lamp: No, glass/cover finish: frosted, light colour according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, Colour: white, Colour temperature: 4000 K, Housing colour: white, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Non-dimmable: Yes, Diameter: 26.70 mm, Length: 1061.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 12.00 kWh, Average rated lifespan: 50,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety in accordance with EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434556

Cost-effective LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use with mains voltage. Single and tandem operation with a conventional ballast (versions ? 0.9 m). Glass tube. Long service life of up to 50,000 hours. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 69% (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20…+45 °C. Corridors, stairwells and car parks. Warehouses. Cold stores and storage rooms. Domestic applications. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, Rated current: 60 mA, Power factor: 0.90, Lamp power: 11.6 W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 1400 lm, Rated luminous flux according to IEC 62612: 1400 lm, Luminous efficacy: 120 lm/W, Colour rendering index (CRI): 80–89, Lamp type: tube, double-ended, filament lamp: No, glass/cover finish: frosted, light colour according to EN 12464-1: daylight white >5300 K, base: G13, colour: white, colour temperature: 6500 K, housing colour: white, beam angle: 190.00°, colour consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1061.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 12.00 kWh, Average rated lifespan: 50,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety in accordance with EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434570

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 76mA, Power factor: 0.90, Lamp power: 15W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1620lm, Rated luminous flux according to IEC 62612: 1620lm, Lamp luminous efficacy: 108lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: White, Color temperature: 3000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1213.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 15.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434600

Cost-efficient LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 76mA, Power factor: 0.90, Lamp power: 15W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1213.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 15.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434624

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 76mA, Power factor: 0.90, Lamp power: 15W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: White, Color temperature: 6500K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1213.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 15.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434648

Cost-effective LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy savings of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Installation in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 90mA, Power factor: 0.90, Lamp power: 18.3W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 2000lm, Rated luminous flux according to IEC 62612: 2000lm, Lamp luminous efficacy: 109lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: White, Color temperature: 3000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1514.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 19.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434662

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 90mA, Power factor: 0.90, Lamp power: 18.3W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 2200lm, Rated luminous flux according to IEC 62612: 2200lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1514.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 19.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434686

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy savings of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 90mA, Power factor: 0.90, Lamp power: 18.3W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 2200lm, Rated luminous flux according to IEC 62612: 2200lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: White, Color temperature: 6500K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1514.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 19.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434709

Cost-efficient LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy savings of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited for use in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.6W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 720lm, Rated luminous flux according to IEC 62612: 720lm, Lamp luminous efficacy: 109lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: White, Color temperature: 3000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 604.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434723

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.6W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 800lm, Rated luminous flux according to IEC 62612: 800lm, Lamp luminous efficacy: 121lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 604.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434747

Cost-effective LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use with mains voltage. Single and tandem operation with a conventional ballast (versions ? 0.9 m). Glass tube. Long service life of up to 50,000 hours. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 69 per cent (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use in combination with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20…+45 °C. Corridors, stairwells and car parks. Warehouses. Cold stores and storage rooms. Domestic applications. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, Rated current: 30 mA, Power factor: 0.90, Lamp power: 6.6 W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 800 lm, Rated luminous flux according to IEC 62612: 800 lm, Luminous efficacy: 121 lm/W, Colour rendering index (CRI): 80–89, Lamp type: tube, double-ended, filament lamp: No, glass/cover finish: frosted, light colour according to EN 12464-1: daylight white >5300 K, base: G13, colour: white, colour temperature: 6500 K, housing colour: white, beam angle: 190.00°, colour consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 604.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 7.00 kWh, Average rated lifespan: 50,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434761

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp-proof luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 25mA, Power factor: 0.90, Lamp power: 5.4W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 585lm, Rated luminous flux according to IEC 62612: 585lm, Lamp luminous efficacy: 108lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: White, Color temperature: 3000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 451.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 6.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434945

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 25mA, Power factor: 0.90, Lamp power: 5.4W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 650lm, Rated luminous flux according to IEC 62612: 650lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 451.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 6.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434969

Cost-efficient LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 25mA, Power factor: 0.90, Lamp power: 5.4W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 650lm, Rated luminous flux according to IEC 62612: 650lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: White, Color temperature: 6500K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 451.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 6.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854434983

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Flicker reduction according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 33mA, Power factor: 0.90, Lamp power: 7W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 765lm, Rated luminous flux according to IEC 62612: 765lm, Lamp luminous efficacy: 109lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: White, Color temperature: 3000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 734.00mm, Protection class (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854435003

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 33mA, Power factor: 0.90, Lamp power: 7W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 850lm, Rated luminous flux according to IEC 62612: 850lm, Lamp luminous efficacy: 121lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 734.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854435027

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 33mA, Power factor: 0.90, Lamp power: 7W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 850lm, Rated luminous flux according to IEC 62612: 850lm, Lamp luminous efficacy: 121lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: White, Color temperature: 6500K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 734.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854435041

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy savings of up to 69% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 47mA, Power factor: 0.90, Lamp power: 10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1080lm, Rated luminous flux according to IEC 62612: 1080lm, Lamp luminous efficacy: 108lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: White, Color temperature: 3000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 908.00mm, Protection class (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: F, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 10.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854435065

Cost-efficient LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Single and tandem operation on conventional ballast (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 47mA, Power factor: 0.90, Lamp power: 10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1200lm, Rated luminous flux according to IEC 62612: 1200lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: White, Color temperature: 4000K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 908.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 10.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854435089

Cost-efficient LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ≥ 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker reduction in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 69% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+45 °C. Corridors, stairwells and parking garages. Warehouses. Cold and storage rooms. Household applications. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Installation in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 47mA, Power factor: 0.90, Lamp power: 10W, Voltage type: AC, Suitable for control gear: No, Suitable for magnetic control gear: Yes, Luminous flux: 1200lm, Rated luminous flux according to IEC 62612: 1200lm, Lamp luminous efficacy: 120lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: White, Color temperature: 6500K, Housing color: White, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 908.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 10.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854435102

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 4.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 21 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 102, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 45, Max. Number of lamps on LS switch B16 A: 128, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 150, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 56, Harmonic content: 18.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 585 lm, Luminous efficacy: 121 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 451.00 mm, Length with base but without base pin: 438.00 mm, Diameter: 26.00 mm, Product weight: 75.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 76 °C, Operating temperature according to IEC 62717: 53 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 5.00 kWh/1000h, Protection class: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_V

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 4.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 21 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 102, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 45, Max. Number of lamps on LS switch B16 A: 128, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 150, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 56, Harmonic content: 18.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 650 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 451.00 mm, Length with base but without base pin: 438.00 mm, Diameter: 26.00 mm, Product weight: 75.00 gTemperatures & Operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 76 °C, Operating temperature according to IEC 62717: 53 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 5.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_V

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 4.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 21 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 102, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 45, Max. Number of lamps on LS switch B16 A: 128, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 150, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 56, Harmonic content: 18.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 650 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 451.00 mm, Length with base but without base pin: 438.00 mm, Diameter: 26.00 mm, Product weight: 75.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 76 °C, Operating temperature according to IEC 62717: 53 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 5.00 kWh/1000h, Protection class: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature:

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 7.4 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 33 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 69, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 68, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 30, Max. Number of lamps on LS switch B16 A: 87, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 86, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 37, Harmonic content: 16.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 900 lm, Luminous efficacy: 121 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 603.00 mm, Length with base but without base pin: 600.00 mm, Diameter: 26.00 mm, Product weight: 97.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 8.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 7.4 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 33 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 69, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 68, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 30, Max. Number of lamps on LS switch B16 A: 87, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 86, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 37, Harmonic content: 16.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 1000 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 603.00 mm, Length with base but without base pin: 600.00 mm, Diameter: 26.00 mm, Product weight: 97.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 8.00 kWh/1000h, Protection class: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Envelope: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALU

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 7.4 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 33 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 69, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 68, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 30, Max. Number of lamps on LS switch B16 A: 87, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 86, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 37, Harmonic content: 16.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 1000 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 603.00 mm, Length with base but without base pin: 600.00 mm, Diameter: 26.00 mm, Product weight: 97.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 8.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SIN

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 8.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 40 mA, Type of current: Alternating current (AC), Inrush current: 10.0 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 60, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 61, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 27, Max. Number of lamps on LS switch B16 A: 75, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 76, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 34, Harmonic content: 16.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 1080 lm, Luminous efficacy: 122 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 908.00 mm, Length with base but without base pin: 900.00 mm, Diameter: 26.00 mm, Product weight: 143.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 9.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 8.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 40 mA, Type of current: Alternating current (AC), Inrush current: 10.0 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 60, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 61, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 27, Max. Number of lamps on LS switch B16 A: 75, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 76, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 34, Harmonic content: 16.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 1200 lm, Luminous efficacy: 136 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 908.00 mm, Length with base but without base pin: 900.00 mm, Diameter: 26.00 mm, Product weight: 143.00 gTemperatures & Operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 9.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 8.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 40 mA, Type of current: Alternating current (AC), Inrush current: 10.0 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 60, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 61, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 27, Max. Number of lamps on LS switch B16 A: 75, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 76, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 34, Harmonic content: 16.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 1200 lm, Luminous efficacy: 136 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 908.00 mm, Length with base but without base pin: 900.00 mm, Diameter: 26.00 mm, Product weight: 143.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 9.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature:

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easier, faster and safer lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 10.3 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 45 mA, Type of current: Alternating current (AC), Inrush current: 8.4 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 71, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 72, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 31, Max. Number of lamps on LS switch B16 A: 89, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 90, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 39, Harmonic content: 15.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 1260 lm, Luminous efficacy: 122 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1060.00 mm, Length with base but without base pin: 1050.00 mm, Diameter: 26.00 mm, Product weight: 155.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 11.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SING

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 10.3 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 45 mA, Type of current: Alternating current (AC), Inrush current: 8.4 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 71, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 72, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 31, Max. Number of lamps on LS switch B16 A: 89, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 90, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 39, Harmonic content: 15.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 1400 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1060.00 mm, Length with base but without base pin: 1050.00 mm, Diameter: 26.00 mm, Product weight: 155.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 11.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SING

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 10.3 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 45 mA, Type of current: Alternating current (AC), Inrush current: 8.4 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 71, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 72, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 31, Max. Number of lamps on LS switch B16 A: 89, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 90, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 39, Harmonic content: 15.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 1400 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1060.00 mm, Length with base but without base pin: 1050.00 mm, Diameter: 26.00 mm, Product weight: 155.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 11.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 6.3 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 28 mA, Type of current: Alternating current (AC), Inrush current: 9.2 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 171, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 100, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 22, Max. Number of lamps on LS switch B16 A: 214, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 160, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 26, Harmonic content: 17 %, Power factor ?: 0.90Photometric data: Luminous flux: 765 lm, Luminous efficacy: 121 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 732.00 mm, Length with base but without base pin: 720.00 mm, Diameter: 26.00 mm, Product weight: 110.00 gTemperatures & Operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 75 °C, Operating temperature according to IEC 62717: 40 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 7.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_

"Product benefits: Energy savings of up to 72 per cent (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement, with or without rewiring. No sagging thanks to glass technology. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in ballast-operated luminaires or at mains voltage. Single and tandem operation with a conventional ballast (versions ? 0.9 m). Glass tube. Long service life of up to 50,000 hours. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1)Technical specifications: Suitable for operation with low-loss and conventional ballastsLegal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Electrical data: Rated power: 6.3 W, Rated voltage: 220–240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 28 mA, Current type: Alternating current (AC), Inrush current: 9.2 A, Suitable for DC operation: Yes, DC input voltage: 186–260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. number of lamps on circuit breaker B10 A: 171, Max. number of lamps on circuit breaker B10 A – KVG/VVG without compensation: 100, Max. number of lamps on circuit breaker B10 A – KVG/VVG with compensation: 22, maximum number of lamps on circuit breaker B16 A: 214, Max. number of lamps on circuit breaker B16 A – KVG/VVG without compensation: 160, Max. number of lamps on circuit breaker B16 A – KVG/VVG with compensation: 26, Harmonic content: 17 %, Power factor ?: 0.90Photometric data: Luminous flux: 851 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of rated life: 0.70, Colour temperature (designation): Cool white, colour temperature: 4000 K, colour rendering index Ra: 80, light colour: 840, standard deviation of colour matching: ?6 sdcm, rated LLMF at 6,000 h: 0.80, flicker parameter (Pst LM): 1, stroboscopic effect parameter (SVM): 0.4Illumination data: Beam angle: 190°, Warm-up time (60 %): ‹ 0.50 s, Start-up time: < 0.5 sDimensions & weight: Overall length: 732.00 mm, Length including base but excluding base pin: 720.00 mm, Diameter: 26.00 mm, Product weight: 110.00 gTemperatures & operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measurement point tc: 75 °C, Operating temperature according to IEC 62717: 40 °CService life: L70/B50 service life at 25 °C: 50,000 h, number of switching cycles: 200,000, luminous flux retention at end of service life: 0.70, nominal lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Applications: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 7.00 kWh/1,000 h, Protection rating: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTICS DATA: Storage temperature range: -20…+80 °CData in accordance with the Energy Labelling Regulation (EU) 2019/2015: Lighting technology used: LED, Unfocused or focused light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Light source base (or other electrical interface): G13, Networked light source (CLS): No, Colour-adjustable light source: No, Enclosure: No, High-luminance light source: No, Anti-glare shield: No, Similar colour temperature: SINGLE_

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 6.3 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 28 mA, Type of current: Alternating current (AC), Inrush current: 9.2 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 171, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 100, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 22, Max. Number of lamps on LS switch B16 A: 214, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 160, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 26, Harmonic content: 17 %, Power factor ?: 0.90Photometric data: Luminous flux: 851 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 732.00 mm, Length with base but without base pin: 720.00 mm, Diameter: 26.00 mm, Product weight: 110.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 75 °C, Operating temperature according to IEC 62717: 40 °CService Life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 7.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature:

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 17.7 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 80 mA, Type of current: Alternating current (AC), Inrush current: 15.6 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. number of lamps on LS switch B10 A: 100, Max. number of lamps on LS switch B10 A - KVG/VVG without compensation: 75, Max. number of lamps on LS switch B10 A - KVG/VVG with compensation: 20, Max. number of lamps on LS switch B16 A: 160, Max. number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. number of lamps on LS switch B16 A - KVG/VVG with compensation: 24, Harmonic content: 18 %, Power factor ?: 0.90Photometric data: Luminous flux: 2160 lm, Luminous efficacy: 122 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 175.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 85 °C, Operating temperature according to IEC 62717: 50 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 18.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SI

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 17.7 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 80 mA, Type of current: Alternating current (AC), Inrush current: 15.6 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 100, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 75, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 20, Max. Number of lamps on LS switch B16 A: 160, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 24, Harmonic content: 18 %, Power factor ?: 0.90Photometric data: Luminous flux: 2400 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 175.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 85 °C, Operating temperature according to IEC 62717: 50 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 18.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SI

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 17.7 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 80 mA, Type of current: Alternating current (AC), Inrush current: 15.6 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 100, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 75, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 20, Max. Number of lamps on LS switch B16 A: 160, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 24, Harmonic content: 18 %, Power factor ?: 0.90Photometric data: Luminous flux: 2400 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measure (Pst LM): 1, Measure for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 175.00 gTemperatures & Operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at the measurement point tc: 85 °C, Operating temperature according to IEC 62717: 50 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 18.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 25.9 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 111 mA, Type of current: Alternating current (AC), Inrush current: 19.2 A, Suitable for DC operation: Yes, DC input voltage: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 72, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 50, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 15, Max. Number of lamps on LS switch B16 A: 115, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 80, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 19, Harmonic content: 19 %, Power factor ?: 0.90Photometric data: Luminous flux: 3150 lm, Luminous efficacy: 121 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1512.00 mm, Length with base but without base pin: 1500 mm, Diameter: 26.00 mm, Product weight: 230.00 gTemperatures & Operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 87 °C, Operating temperature according to IEC 62717: 58 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 26.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE

"Product benefits: Energy savings of up to 72 per cent (compared to T8 fluorescent tubes). Simple, quick and safe lamp replacement, with or without rewiring. No sagging thanks to the glass construction. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in ballast-operated luminaires or at mains voltage. Single and tandem operation with a conventional ballast (versions ? 0.9 m). Glass tube. Long service life of up to 50,000 hours. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1)Technical specifications: Suitable for operation with low-loss and conventional ballastsLegal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Electrical data: Rated power: 25.9 W, Rated voltage: 220–240 V, Operating mode: magnetic ballast/electronic ballast, mains voltage, DC, Rated current: 111 mA, Current type: Alternating current (AC), Inrush current: 19.2 A, Suitable for DC operation: Yes, DC input voltage: 186–260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on circuit breaker B10 A: 72, Max. number of lamps on circuit breaker B10 A – KVG/VVG without compensation: 50, Max. number of lamps on circuit breaker B10 A – KVG/VVG with compensation: 15, Max. number of lamps on circuit breaker B16 A: 115, Max. number of lamps on circuit breaker B16 A – KVG/VVG without compensation: 80, Maximum number of lamps on circuit breaker B16 A – KVG/VVG with compensation: 19, Harmonic content: 19 per cent, Mains power factor ?: 0.90Photometric data: Luminous flux: 3500 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of rated life: 0.70, Light colour (designation): Cool daylight, colour temperature: 6500 K, colour rendering index Ra: 80, light colour: 865, standard deviation of colour matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker parameter (Pst LM): 1, Stroboscopic effect parameter (SVM): 0.4Photometric data: Beam angle: 190°, Warm-up time (60 %): ‹ 0.50 s, Start-up time: < 0.5 sDimensions & weight: Overall length: 1,512.00 mm, length including base but excluding base pin: 1,500 mm, diameter: 26.00 mm, product weight: 230.00 gTemperatures & operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measurement point tc: 87 °C, Operating temperature according to IEC 62717: 58 °CService life: L70/B50 service life at 25 °C: 50,000 h, number of switching cycles: 200,000, luminous flux retention at end of service life: 0.70, note: lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Applications: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 26.00 kWh/1,000 h, Protection rating: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTICS DATA: Storage temperature range: -20…+80 °CData in accordance with the Energy Labelling Regulation EU 2019/2015: Lighting technology used: LED, Unfocused or focused light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Light source base (or other electrical interface): G13, Networked light source (CLS): No, Colour-adjustable light source: No, Enclosure: No, High-luminance light source: No, Anti-glare shield: No, Similar colour temperature