Ledvance DP EL 1200 32W 840 IP65 GY

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Light output in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy savings (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, anti-theft kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Office lighting suitable according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: gray, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 90mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated service life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 58, Max. Number of light fittings circuit breaker C16: 73, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 18.00W, Luminous efficacy of the light fitting: 135lm/W, Rated light output according to IEC 62722-2-1: 2400lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1200.00mm, Type of wiring: suitable for loop-in wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, Li

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Luminous flux in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Screen workstation suitable according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: gray, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 90mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated service life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 58, Max. Number of light fittings circuit breaker C16: 73, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 18.00W, Light fitting luminous efficacy: 135lm/W, Rated luminous flux according to IEC 62722-2-1: 2400lm, Color temperature: 6500K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1200.00mm, Type of wiring: suitable for loop-through wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, Adjustable light output

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Luminous flux in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60% energy savings (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, anti-theft kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Screen workstation suitable according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 280mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 27, Max. Number of light fittings circuit breaker C16: 39, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 32.00W, Light fitting luminous efficacy: 125lm/W, Rated luminous flux according to IEC 62722-2-1: 4000lm, Light color: white, Color temperature: 3000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1200.00mm, Type of wiring: suitable for loop-in wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, L

Moisture-resistant light fittings, classic shape with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Luminous flux in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to supplied, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Office lighting suitability according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 280mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-control: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 27, Max. Number of light fittings circuit breaker C16: 39, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 32.00W, Light fitting luminous efficacy: 138lm/W, Rated luminous flux according to IEC 62722-2-1: 4400lm, Color temperature: 6500K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1200.00mm, Type of wiring: suitable for loop-through wiring, Number of poles: 3, Connection type: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, Adjustable light output

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Light output in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Function test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Office lighting suitability according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 150mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 56, Max. Number of light fittings circuit breaker C16: 71, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 26.00W, Light fitting luminous efficacy: 135lm/W, Rated light output according to IEC 62722-2-1: 3500lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-through wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, L

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Luminous flux in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Function test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Office lighting suitable according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 150mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-control: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 56, Max. Number of light fittings circuit breaker C16: 71, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 26.00W, Light fitting luminous efficacy: 135lm/W, Rated luminous flux according to IEC 62722-2-1: 3500lm, Color temperature: 6500K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-in wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, Adjustable light output

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Light output in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Office lighting suitability according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: gray, Material of the cover: opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 340mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 26, Max. Number of light fittings circuit breaker C16: 37, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 46.00W, Luminous efficacy of light fitting: 125lm/W, Rated light output according to IEC 62722-2-1: 5750lm, Light color: white, Color temperature: 3000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-through wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, L

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Luminous flux in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and security screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Screen workstation suitable according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: gray, Material of the cover: opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 340mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated service life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 26, Max. Number of light fittings circuit breaker C16: 37, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 46.00W, Luminous efficacy of the light fitting: 139lm/W, Rated luminous flux according to IEC 62722-2-1: 6400lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-through wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, L

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Luminous flux in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and security screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Screen workstation suitable according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 340mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 26, Max. Number of light fittings circuit breaker C16: 37, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 46.00W, Light fitting luminous efficacy: 139lm/W, Rated luminous flux according to IEC 62722-2-1: 6400lm, Color temperature: 6500K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-through wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, Adjustable light output

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general lighting and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Light output in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Function test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and security screws included. Mounting accessories included (suspension kit, theft protection kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Office lighting suitability according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 380mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 26, Max. Number of light fittings circuit breaker C16: 38, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 58.00W, Luminous efficacy of light fitting: 138lm/W, Rated light output according to IEC 62722-2-1: 8000lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-in wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, L

Moisture-resistant light fittings, classic design with integrated emergency lighting function. Product features: Light fitting suitable for general and emergency lighting. Certified according to European standards (EN 60598-1:2020, EN 60598-2-22:2021). Single battery light fittings. Light output in emergency mode: 500 lm. Emergency lighting function: Battery discharge duration 3 h. Functional test of the emergency lighting: automatic (AT). Battery technology: LiFePO4. High luminous efficacy: up to 139 lm/W. Degree of protection: IP65. Beam angle: 110°. Product advantages: Seamless integration of light fittings with emergency lighting function into the general lighting. Easy wiring thanks to included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function through integrated automatic test function. Convenient visualization of the results of the automatic test with included control LED. Operation of the emergency lighting function with long-lasting LiFePO4 battery with 3h operating discharge time. Uniform light distribution in normal operation. Up to 60 % energy saving (compared to light fittings using fluorescent lamps). Easy installation, tool-less connection. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings for which emergency lighting of 3 h is required. Industrial and storage areas. Parking lots and underpasses. Garages. Workshops, production lines. Technical equipment: Clamps made of stainless steel and safety screws included. Mounting accessories included (suspension kit, anti-theft kit).Wall mounting: Yes, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Suitable for VDU workstations according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Surface protection housing: untreated, Housing color: grey, Material of the cover: Opal plastic, Design of the grid: other, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 380mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM4, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 26, Max. Number of light fittings circuit breaker C16: 38, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: 5-35°C, Suitable for emergency lighting: Yes, Integrated emergency power supply: Yes, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 58.00W, Luminous efficacy of light fitting: 138lm/W, Rated light output according to IEC 62722-2-1: 8000lm, Color temperature: 6500K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 82.00mm, Height/Depth: 68.00mm, Length: 1500.00mm, Type of wiring: suitable for loop-in wiring, Number of poles: 3, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: no, Adjustable light output