Ledvance FL COMP V 90W865 SYM 100 BK

Floodlight with up to 9000 lm luminous flux. Product features: Reflector-based, symmetrical light distribution with 100° x 100° beam angle. Overvoltage protection: up to 4 kV (L/N-PE), 2 kV (L-N). Mounting bracket with 30° angle and large rotation range. Pre-installed, flexible cable (H05RN-F) with 1 m length, 3 x 1.0 mm² crimped. Climate membrane for optimized air exchange, with constant high IP protection rating. Product advantages: Robust yet light and compact design. Safe and very uniform illumination, thanks to opaque, tempered glass diffuser. No light emission in the upper hemisphere (ULOR 0%) at 0° inclination. Energy savings of up to 90% compared to halogen floodlights. Application areas: Replacement for floodlights with halogen lamps. Outdoor use (IP65). Public spaces. Facade illumination. Gardens, balconies and other outdoor areas. Construction sites. Safety instructions: Max. wind load area 0.043 m². All electrical connections must only be carried out by qualified personnel. The flexible outdoor cable of this light fitting cannot be replaced, if the cable is damaged, the light fitting must be disposed of. Connection terminal not included in the scope of delivery. The installation must only be carried out by qualified personnel. Caution, risk of electric shock. Product of protection class I. All electrically conductive, metallic housing parts that can pick up voltage during operation or in the event of a fault during maintenance must be continuously connected to the protective conductor.
Suitable for surface mounting: Yes, Suitable for recessed mounting: No, Wall mounting: Yes, Suitable for pendant suspension: No, Suitable for ceiling mounting: No, Suitable for truss mounting: No, Suitable for podium/floor mounting: Yes, Suitable for track mounting: No, Suitable for clamp mounting: No, Suitable for cable system: No, Adjustability: tiltable, With motion detector: No, With light sensor: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Socket: none, Housing material: aluminium, Surface: powder-coated, Housing colour: black, Brushed surface: No, Voltage type: AC, Rated voltage: 220-240V, Rated current: 434mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-control: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Reflector: matte, Light distributor: reflector, Light distribution: symmetrical, Light emission: direct, Rated lifetime L70/B50 at 25 °C: 50000h, Constant light output control: No, Degree of protection (IP): IP65, Impact resistance: IK08, Protection class: I, Rated ambient temperature according to IEC62722-2-1: -30-45°C, Max. system power: 90.00W, Colour temperature: 6500K, Colour rendering index CRI: 80-89, Luminous flux: 9000lm, Rated luminous flux according to IEC 62722-2-1: 9000lm, Power factor: 0.90, Adjustable colour temperature: no, Adjustable luminous flux: no, Adjustable beam angle: no, Width: 255.00mm, Height/Depth: 40.00mm, Length: 236.00mm, Type of wiring: Terminal, Number of poles: 3, Connection type: plug terminal, Light fitting with limited surface temperature D-mark: No, Max. number of light fittings circuit breaker B16: 20, Max. number of light fittings circuit breaker C16: 23, Emergency power supply integrated: No, Light fitting luminous efficacy: 100lm/W, Photobiological safety according to EN 62471: RG1, Suitable for VDU workplaces according to EN 12464-1: No, Light fitting can be covered with thermal insulation material: No, IFT