Ledvance LEDTUBE T8 EM P 600 7W 840

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter-proof. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use with mains voltage. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Single and tandem operation with a conventional ballast (0.6 m version). Glass lamp tube with shatter protection for applications such as those in the food industry. Mercury-free and RoHS-compliant. Uniform illumination. Protection rating: IP20. Product benefits: No sagging thanks to the glass tube. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 66 per cent (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Very high switching durability. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20 to +50°C. Lighting in industrial production. Traffic areas and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220V, Rated current: 60mA, Power factor: 0.90, Lamp power: 13.50W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 1890 lm, Rated luminous flux according to IEC 62612: 1890 lm, Lamp luminous efficacy: 140 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: G13, Colour temperature: 3000 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1212.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 14.00 kWh, Average rated lifespan: 60,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854036897

LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Single and tandem operation on conventional control gear (0.6 m version). Lamp tube made of glass with shatterproof protection for applications e.g. in the food industry. Mercury-free and RoHS-compliant. Homogeneous illumination. Protection class: IP20. Product advantages: No sagging thanks to glass tube. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 32mA, Power factor: 0.90, Lamp power: 7.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: Matt, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Protection class (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 7.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854036996

LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Single and tandem operation on conventional control gear (0.6 m version). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. Mercury-free and RoHS-compliant. Homogeneous illumination. Protection class: IP20. Product advantages: No sagging thanks to glass tube. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 90mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2790lm, Rated luminous flux according to IEC 62612: 2790lm, Lamp luminous efficacy: 139lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1513.00mm, Protection class (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 20.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037078

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter-proof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or for use with mains voltage. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Single and tandem operation with a conventional ballast (0.6 m version). Glass lamp tube with shatter protection for applications such as those in the food industry. Mercury-free and RoHS-compliant. Uniform illumination. Protection rating: IP20. Product benefits: No sagging thanks to the glass tube. Simple, quick and safe lamp replacement without the need for rewiring. Energy savings of up to 66 per cent (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use in combination with sensor systems. Very high switching durability. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20 to +50°C. Lighting in industrial production. Traffic areas and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220V, Rated current: 90mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 3100 lm, Rated luminous flux according to IEC 62612: 3100 lm, Lamp luminous efficacy: 155 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: G13, Colour temperature: 4000 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1513.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Minimum number of switching cycles: 200,000, Total harmonic distortion (THD): 16, Weighted energy consumption over 1,000 hours: 20.00 kWh, Average rated service life: 60,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037139