Ledvance LEDTUBE T8 EM S 900 9.7W 840

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 24mA, Power factor: 0.90, Lamp power: 5.10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 900lm, Rated luminous flux according to IEC 62612: 900lm, Lamp luminous efficacy: 176lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 450.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 6.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037375

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.30W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 990lm, Rated luminous flux according to IEC 62612: 990lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037399

High-performance LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, with shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use at mains voltage. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Glass lamp tube with shatter protection for applications such as in the food industry. ENEC 10 VDE mark. Single and tandem operation with a conventional ballast (versions ?0.9 m). Service life: up to 75,000 hours. Protection class: IP20. Mercury-free and RoHS-compliant. Product benefits: No sagging thanks to the glass construction. Splinter protection thanks to a special PET coating. Supports the implementation of HACCP concepts from production right through to product display. Very high switching durability. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 70 per cent (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use in combination with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20 to +50°C. Lighting in industrial manufacturing. Traffic areas and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.30W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 1100 lm, Rated luminous flux according to IEC 62612: 1100 lm, Lamp luminous efficacy: 174 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: G13, Colour temperature: 4000 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 603.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 7.00 kWh, Average rated service life: 75,000 h, Remote control possible: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037412

Powerful LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatterproof thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.30W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 174lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037436

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 45mA, Power factor: 0.90, Lamp power: 9.70W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1530lm, Rated luminous flux according to IEC 62612: 1530lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 908.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 10.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037450

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 45mA, Power factor: 0.90, Lamp power: 9.70W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1700lm, Rated luminous flux according to IEC 62612: 1700lm, Lamp luminous efficacy: 175lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 908.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 10.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037498

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≥0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatterproof thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 52mA, Power factor: 0.90, Lamp power: 11.40W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: G13, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1060.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 12.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037511

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 52mA, Power factor: 0.90, Lamp power: 11.40W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2000lm, Rated luminous flux according to IEC 62612: 2000lm, Lamp luminous efficacy: 175lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1060.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 12.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037535

High-performance LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, with shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use at mains voltage. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Glass lamp tube with shatter protection for applications such as in the food industry. ENEC 10 VDE mark. Single and tandem operation with a conventional ballast (versions ?0.9 m). Service life: up to 75,000 hours. Protection class: IP20. Mercury-free and RoHS-compliant. Product benefits: No sagging thanks to the glass construction. Splinter protection thanks to a special PET coating. Supports the implementation of HACCP concepts from production right through to product display. Very high switching durability. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 70 per cent (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20 to +50°C. Lighting in industrial production. Traffic areas and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220V, Rated current: 54mA, Power factor: 0.90, Lamp power: 12.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 2100 lm, Rated luminous flux according to IEC 62612: 2100 lm, Lamp luminous efficacy: 175 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: G13, Colour temperature: 4000 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1212.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 12.00 kWh, Average rated service life: 75,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037597

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≥0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 80mA, Power factor: 0.90, Lamp power: 17.70W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2790lm, Rated luminous flux according to IEC 62612: 2790lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: G13, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 18.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037634

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatterproof thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 80mA, Power factor: 0.90, Lamp power: 17.70W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3100lm, Rated luminous flux according to IEC 62612: 3100lm, Lamp luminous efficacy: 175lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 18.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037658

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass lamp tube with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ≤0.9 m). Service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: No sagging thanks to glass technology. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 70% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 80mA, Power factor: 0.90, Lamp power: 17.70W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3100lm, Rated luminous flux according to IEC 62612: 3100lm, Lamp luminous efficacy: 175lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Glass/cover finish: frosted, Light color according to EN 12464-1: daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 18.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854037672