Ledvance SF FLAT SQ SEN 500 P 27W CPS

Versatile square wall and ceiling light fitting with integrated sensor. Product features: High-frequency sensor for daylight/ motion detection, corridor and grouping function. Degree of protection: IP54 (wall and ceiling mounting). Impact resistance: IK08. Service life (L80/B10): 100,000 h (at 25 °C), (L90/B10): 50,000 h (at 25 °C). Polycarbonate (PC) housing, PC diffuser. Operating ambient temperature range: -20.+45 °C. Glow wire test according to IEC 60695-2-12: 850 °C. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Through-wiring possible. For indoor use only, not suitable for outdoor use. Product advantages: Multiple setting of the sensor range, daylight detection, light duration and DIM level/-period possible. Wireless (radio frequency) communication with other sensor light fittings at a distance of up to 15 m. Assignment of up to 15 groups and cross-group interaction (leader/follower or swarm function). Easy upgradeability of light source, driver and sensor (EVERLOOP design). Very versatile due to a CCT and wattage setting selectable at the driver (Multi Color / Multi Lumen). Indoor light fitting with an efficiency of up to 140 lm/W. High color consistency with SDCM 3. Tool-free electrical connection thanks to push-button terminal block. Very homogeneous light with slight backlight effect. For comfortable configuration, the sensor can be removed from the light fitting. Areas of application: Direct replacement for surface-mounted light fittings with integrated CFLni lamps. Corridors. Stairwells. Bathrooms. Entrance areas. Technical equipment: EVERLOOP light fitting: extensions and replacement components available. Decorative silver frame available separately.Wall mounting: Yes, Suitable for pendant suspension: No, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Suitable for office workstation according to EN 12464-1: No, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Material of the housing: Plastic, Housing color: white, Material of the cover: Plastic opal, Design of the grid: Matt, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 85mA, Control gear: LED driver, With control gear: Yes, Replaceable control gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Color consistency (McAdam ellipse): SDCM3, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated service life L70/B50 at 25 °C: 100000h, Max. Number of light fittings circuit breaker B16: 57, Max. Number of light fittings circuit breaker C16: 73, Degree of protection (IP): IP54, Impact resistance: IK08, Protection class: II, Rated ambient temperature according to IEC62722-2-1: -20-45°C, Suitable for emergency lighting: No, Integrated emergency power supply: No, With motion detector: Yes, With light sensor: Yes, Cover of the light fitting with thermal insulation material possible: No, With air slots: Yes, Max. System power: 19.00W, Light fitting luminous efficacy: 140lm/W, Rated luminous flux according to IEC 62722-2-1: 2660lm, Light color: white, Color temperature: 3000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 330.00mm, Height/Depth: 65.00mm, Length: 330.00mm, Type of wiring: suitable for through-wiring, Number of poles: 5, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Adjustable color temperature: Steps, Li