TECTON C LED12000-840 L1500 NB LDE WH

White LED light fitting. DALI controllable light fitting with LED converter, LED lifespan 100,000 h up to a light output reduction to 75% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5400 lm, light fitting luminous efficacy: 169 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting. Dimming level for DC mode preset to 15%. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON mounting rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: For use in chemically contaminated ambient atmospheres or outdoors, please consult your advisor. Dimensions: 1522 x 51 x 48 mm. Weight: 1.4 kg

LED light fitting in white, with electronic control gear with LED converter, LED lifespan 100,000 h up to a light output reduction to 75% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5400 lm, light fitting luminous efficacy: 166 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON support rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: In case of application in chemically stressed ambient atmospheres or in outdoor areas, please contact your consultant. Dimensions: 1522 x 51 x 48 mm. Weight: 1.36 kg

Silver LED light fitting. DALI controllable light fitting with LED converter, LED lifespan 100000 h up to a light output reduction to 75% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5340 lm, light fitting luminous efficacy: 167 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting. Dimming level for DC mode preset to 15%. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON support rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: In case of application in chemically stressed ambient atmospheres or outdoors please contact your consultant. Dimensions: 1522 x 51 x 48 mm. Weight: 1.4 kg

LED light fitting strip in silver, with electronic control gear with LED converter, LED lifespan 100,000 h up to a light output reduction to 75% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5340 lm, light fitting luminous efficacy: 164 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting strip. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON support rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: In case of application in chemically stressed ambient atmospheres or in outdoor areas please contact your consultant. Dimensions: 1522 x 51 x 48 mm. Weight: 1.36 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 180 lm/W. Light fitting luminous flux: 3,860 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED strip light with 64 highly efficient mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 173 lm/W. Luminaire luminous flux: 5,600 lm. Shelf beam. Colour rendering index Ra > 80, colour temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatter-resistant up to IK07) provide IP50 protection for the LEDs and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip luminaire made from sheet steel, finished in white polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). Luminaire wired halogen-free and silicone-free. Note: Please consult your advisor if using the luminaire in environments with chemical contamination. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 90 % of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 163 lm/W. Light fitting luminous flux: 5,270 lm. Light fitting with WALLWASHER beam characteristic. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. The reflector included in the scope of delivery made of aluminum, powder-coated in white, is clicked onto the light fitting without tools (mounting on both sides possible). Reflector end caps are to be ordered separately. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: In case of application in chemically contaminated ambient atmospheres please consult your advisor. Dimensions: 1,000 x 62 x 146 mm. Weight: 1.8 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in light output to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 177 lm/W. Light fitting luminous flux: 5,550 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enabling a 100% continuous LED light fitting without interruption. High-quality appearance in the same design as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 182 lm/W. Light fitting luminous flux: 5700 lm. shelf beam (shelf). Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment, electronic control gear with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 179 lm/W. Light fitting luminous flux: 3,860 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 184 lm/W. Light fitting luminous flux: 5,790 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enabling a 100% continuous LED light band without interruption. High-quality appearance in the same design as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment, electronic control gear with LED converter. LED lifespan 100000 h up to a reduction in luminous flux to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 187 lm/W. Light fitting luminous flux: 5790 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON LED strip light with 64 highly efficient mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 189 lm/W. Luminaire luminous flux: 5,950 lm. Shelf beam. Colour rendering index Ra > 80, colour temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatter-resistant up to IK07) provide IP50 protection for the LEDs and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip luminaire made from sheet steel, finished in white polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). Luminaire wired halogen-free and silicone-free. Note: Please consult your advisor if using in environments with chemical contamination. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 175 lm/W. Light fitting luminous flux: 5,650 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON MPO LED light fitting with highly efficient 192 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 166 lm/W. Light fitting luminous flux: 8280 lm. Color rendering index Ra > 80, color temperature 4000 K. Light direction via backlit multi-layer MPO micro prism optics to minimize perceived glare and UGR values. 12% indirect light for gentle ceiling illumination. Co-extruded hollow chamber profile with glued end caps (shatterproof up to IK06) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined. Dimming level for DC mode preset to 15%. Base carrier of the LED light fitting made of sheet steel, powder-coated in polyester resin, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +35°C. Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1522 x 104 x 151 mm. Weight: 4 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 80% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 171 lm/W. Light fitting luminous flux: 11,680 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enabling a 100% continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (surface-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

White LED strip light, with electronic ballast and LED converter; LED service life: 100,000 hours until luminous flux drops to 75 per cent of the initial value. Colour tolerance (initial MacAdam): 3. Luminaire luminous flux: 8,230 lm, luminaire luminous efficacy: 162 lm/W. Colour rendering index Ra > 80, colour temperature 4,000 K. LED strip light. All-in-one design: light bar, light source and diffuser optics are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation onto the TECTON mounting rail via two side-mounted twist levers. No ultraviolet or infrared radiation. Ambient temperature: -20°C to +30°C. Luminaire wired without halogen components. Note: Please consult your adviser if using in chemically contaminated environments or outdoors. Dimensions: 1522 x 51 x 48 mm. Weight: 1.36 kg

LED light fitting in white. DALI controllable light fitting with LED converter, LED lifespan 100000 h up to a light output reduction to 75% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 8230 lm, light fitting luminous efficacy: 163 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting. Dimming level for DC mode preset to 15%. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON support rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: In case of application in chemically contaminated ambient atmospheres or outdoors please consult your advisor. Dimensions: 1522 x 51 x 48 mm. Weight: 1.4 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 80 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 164 lm/W. Light fitting luminous flux: 11750 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 6500 K. Split lens concept for reducing perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a light output reduction to 90% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 142 lm/W. Light fitting luminous flux: 2670 lm. Color rendering Ra > 80, color temperature 4000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19 and a luminance of < 3000 cd/m². All-in-one solution: light bar, lamp and reflector in a single product combined. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1000 x 60 x 85 mm Weight: 1.5 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a light output reduction to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 148 lm/W. Light fitting luminous flux: 5,340 lm. Color rendering Ra > 80, color temperature 4,000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19. All-in-one solution: light bar, lamp and reflector in a single product combined. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,997 x 60 x 85 mm Weight: 2.8 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 140 lm/W. Light fitting luminous flux: 3,620 lm. Color rendering Ra > 80, color temperature 4,000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19. All-in-one solution: light bar, lamp and reflector combined in a single product. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,000 x 60 x 85 mm Weight: 1.5 kg

Linear TECTON MIREL LED strip light made from profiled sheet steel, coated with white polyester resin paint. DALI-controllable luminaire (DALI only) with LED converter. LED service life: 100,000 hours until luminous flux drops to 85 per cent of the initial value. Colour tolerance (initial MacAdam): 3. Luminaire luminous efficacy: 145 lm/W. Luminaire luminous flux: 5,430 lm. Colour rendering index Ra > 80, colour temperature 4,000 K. LED strip light with 4 highly efficient mid-power LEDs per lens segment. Light distribution via a reflector-lens combination results in a unique light strip design and photometric advantages such as very low UGR values with a minimal light-emitting area. The lens-reflector combination enables an UGR < 19 and a luminance of < 3000 cd/m². All-in-one solution: light bar, light source and reflector combined in a single product. Base frame of the LED light strip made from sheet steel with a white polyester resin finish. 100% flexible, tool-free mechanical and electrical installation using CLIX technology with two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Luminaire wired without halogen components. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 146 lm/W. Light fitting luminous flux: 4,060 lm. Color rendering Ra > 80, color temperature 3,000 K. LED light fitting with 4 highly efficient mid-power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19 and a luminance of < 3,000 cd/m². All-in-one solution: light bar, lamp and reflector combined in a single product. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,498 x 60 x 85 mm Weight: 2.2 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in white. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 137 lm/W. Light fitting luminous flux: 3,620 lm. Color rendering Ra > 80, color temperature 3,000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19. All-in-one solution: light bar, lamp and reflector in a single product combined. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,000 x 60 x 85 mm Weight: 1.5 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 159 lm/W. Light fitting luminous flux: 3490 lm. Symmetrically wide beam light fitting. Color rendering index > 80, color temperature 3000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED strip light with 64 highly efficient mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 167 lm/W. Luminaire luminous flux: 3,580 lm. Symmetrical wide-beam luminaire. Colour rendering index Ra > 80, colour temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) provide IP50 protection for the LED and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip luminaire made from sheet steel, finished in black polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). Luminaire wired without halogen and silicone-free. Note: Please consult your advisor if using in environments with chemical contamination. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 165 lm/W. Light fitting luminous flux: 5150 lm. Symmetrically wide emitting light fitting (wide beam). Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres please consult your advisor. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 163 lm/W. Light fitting luminous flux: 5,240 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 171 lm/W. Light fitting luminous flux: 5,370 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 167 lm/W. Light fitting luminous flux: 7720 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON MIREL LED continuous-row luminaire made from profiled sheet steel, coated with black polyester resin paint. DALI-controllable luminaire (DALI only) with LED converter. LED service life: 100,000 hours until luminous flux drops to 90 per cent of the initial value. Colour tolerance (initial MacAdam): 3. Luminaire luminous efficacy: 127 lm/W. Luminaire luminous flux: 2,520 lm. Colour rendering index Ra > 80, colour temperature 4,000 K. LED strip light with 4 highly efficient mid-power LEDs per lens segment. Light distribution via a reflector-lens combination results in a unique light strip design and photometric advantages such as very low UGR values with a minimal light-emitting area. The lens-reflector combination enables an UGR < 19 and a luminance of < 3000 cd/m². All-in-one solution: light bar, light source and reflector combined in a single product. Base frame of the LED light strip luminaire made from sheet steel with a black polyester resin coating. 100% flexible, tool-free mechanical and electrical installation using CLIX technology with two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Luminaire wired without halogen components. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in black. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a light flux reduction to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 126 lm/W. Light fitting luminous flux: 3,410 lm. Color rendering Ra > 80, color temperature 4,000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19. All-in-one solution: light bar, lamp and reflector combined in a single product. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,000 x 60 x 85 mm Weight: 1.5 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in black. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 131 lm/W. Light fitting luminous flux: 3,780 lm. Color rendering Ra > 80, color temperature 4,000 K. LED light fitting with 4 highly efficient mid-power LEDs per lens segment. Light direction via reflector-lens combination results in a unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19 and a luminance of < 3,000 cd/m². All-in-one solution: light bar, lamp and reflector in a single product combined. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1,498 x 60 x 85 mm Weight: 2.2 kg

Linear TECTON MIREL LED light fitting made of profiled steel sheet coated with polyester resin paint in black. DALI controllable light fitting (DALI only) with LED converter. LED lifespan 100,000 h up to a light output reduction to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 131 lm/W. Light fitting luminous flux: 5040 lm. Color rendering Ra > 80, color temperature 4000 K. LED light fitting with 4 highly efficient Mid-Power LEDs per lens segment. Light direction via reflector-lens combination results in unique light band design and lighting advantages such as very low UGR values with the smallest light exit area. Lens reflector enables UGR < 19. All-in-one solution: light bar, lamp and reflector combined in a single product. Base carrier of the LED light fitting made of steel sheet in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Impact resistance: IK03. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Dimensions: 1997 x 60 x 85 mm Weight: 2.8 kg

LED light fitting in black, with electronic control gear with LED converter, LED lifespan 50000 h up to a light output reduction to 85% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5280 lm, light fitting luminous efficacy: 162 lm/W. Color rendering index Ra > 80, color temperature 4000 K. LED light fitting. All-in-one approach: light bar, lamp and diffuser optic are combined in a single product. Phase selection at the tap. 100% flexible and tool-free mechanical and electrical installation on the TECTON support rail through two laterally attached rotary levers. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +30°C. Light fitting halogen-free wired. Note: In case of application in chemically stressed ambient atmospheres or in outdoor areas please contact your consultant. Dimensions: 1522 x 51 x 48 mm. Weight: 1.36 kg

Linear TECTON LED continuous-row luminaire with highly efficient 64 mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 174 lm/W. Luminaire luminous flux: 5,470 lm. Symmetrical wide-beam luminaire. Colour rendering index Ra > 80, colour temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) provide IP50 protection for the LED and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip luminaire made from sheet steel, finished in silver polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). Luminaire wired halogen-free and silicone-free. Note: Please consult your advisor if using in environments with chemical contamination. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 177 lm/W. Light fitting luminous flux: 5,560 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 6,500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 173 lm/W. Light fitting luminous flux: 8230 lm. Symmetrically wide emitting light fitting (wide beam). Color rendering Ra > 80, color temperature 6500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 184 lm/W. Light fitting luminous flux: 8,510 lm. Symmetrically narrow-beam light fitting. Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 162 lm/W. Light fitting luminous flux: 3,560 lm. Symmetrically wide emitting light fitting (wide beam). Color rendering Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light strip made of sheet steel, coated in polyester resin paint, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED strip light with highly efficient 64 mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 180 lm/W. Luminaire luminous flux: 5,800 lm. Shelf beam. Colour rendering index Ra > 80, colour temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) provide IP50 protection for the LEDs and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip luminaire made from sheet steel, finished in white polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). Luminaire wired halogen-free and silicone-free. Note: Please consult your adviser if using in environments with chemical contamination. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 170 lm/W. Light fitting luminous flux: 7,860 lm. Symmetrically wide emitting light fitting (wide beam). Color rendering index Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100% continuous LED light band without interruption. High-quality appearance in the same look as the suspension rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON suspension rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: In case of application in chemically polluted ambient atmospheres please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 163 lm/W. Light fitting luminous flux: 7,770 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 6,500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 185 lm/W. Light fitting luminous flux: 8,550 lm. Shelf beam (shelf). Color rendering index > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product enable a 100% continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 176 lm/W. Light fitting light output: 8,400 lm. Shelf beam (shelf). Color rendering index > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 179 lm/W. Light fitting luminous flux: 8,270 lm. Shelf beam (shelf). Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin, silver. 100 % flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED strip light with 64 highly efficient mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 170 lm/W. Luminaire luminous flux: 5,460 lm. Luminaire with WALLWASHER beam pattern. Colour rendering index Ra > 80, colour temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping PMMA lenses provide IP50 protection for the LEDs and optics. All-in-one solution: Light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15%. LED light strip luminaire made from sheet steel, finished in white polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. The aluminium reflector, included in the scope of delivery and powder-coated in white, clicks into place on the luminaire without the need for tools (mounting possible on either side). Reflector end caps must be ordered separately. Ambient temperature: -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). The luminaire is wired without halogen and is silicone-free. Note: Please consult your advisor if using the luminaire in environments with chemical contamination. Dimensions: 1498 x 62 x 146 mm. Weight: 2.8 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 166 lm/W. Light fitting luminous flux: 7,900 lm. Light fitting with WALLWASHER beam characteristic. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100% continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-less mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. The reflector included in the scope of delivery made of aluminum, powder-coated in white, is clicked onto the light fitting without tools (mounting possible on both sides). Reflector end caps are to be ordered separately. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: In case of application in chemically contaminated ambient atmospheres, please contact your consultant. Dimensions: 1,498 x 62 x 146 mm. Weight: 2.8 kg.

TECTON Adapter in white for mounting the PERLUCE light fitting onto the TECTON light strip system. After installation of the adapter, the light fitting loses its IP protection. Tool-free and quick mounting, flexible positioning of the light fitting and by means of adapter on the TECTON light strip system. All screws for fastening the rail as well as a fall arrest are included. Weight: 0,57 kg

TECTON Adapter for mounting the PERLUCE light fitting onto the TECTON light track system. After installation of the adapter, the light fitting loses its IP protection. Tool-free and quick assembly, flexible positioning of the light fitting and by means of the adapter on the TECTON light track system. All screws for securing the rail as well as a fall arrest device are included. Weight: 0.35 kg

Suspension rail for individual mounting silver made of profiled steel sheet coated with polyester resin. Connection for 6-pole included (mains 3, control line 2, emergency permanent phase 1). Silver end caps are included in the delivery. Dimensions: 1522 x 60 x 54 mm, Weight: 2.7 kg

Passive Infrared Motion Detector with TECTON Adapter in white, for sensor heights of up to 16 m. For use with Tridonic corridorFUNCTION or similar functionality from other control gear manufacturers. Protection class: IP20. Dimensions: 248 x 98 x 67 mm, Weight: 0.8 kg

Slave - Sensor for PST DIMLITE SINGLE TEC-GP with TECTON Adapter, to extend the detection range. The PST DIMLITE SLAVE TEC-GP is only to be used in conjunction with a 22169250 PST DIMLITE MASTER TEC-GP. Adjustment of the delay time (15 sec. to 30 min.) at the sensor as well as changing the brightness threshold only possible by means of IR remote control (22169184). Initial state of the sensor: 1000 Lux brightness threshold and 3 min delay time. Dimensions: 498 x 98 x 67 mm, Weight: 1 kg

Mounted optic CG made of powder-coated aluminum in white consisting of two reflector wings to reduce the UGR value: TECTON C High-Efficiency UGR < 19 and TECTON C High-Output UGR < 22 is achieved. The CG optic is optimized for the TECTON C WideBeam light fittings. Mounting aid for mounted optic CG using Add-on Clip on the end caps of the LED lamp. Dimensions: 1498 x 84 x 2 mm Weight: 1 kg

Mounted optic CG made of powder-coated aluminum in silver consisting of two reflector wings to reduce the UGR value: TECTON C High-Efficiency UGR < 19 and TECTON C High-Output UGR < 22 is achieved. The CG optic is optimized for the TECTON C WideBeam light fittings. Mounting aid for mounted optic CG using Add-on Clip on the end caps of the LED lamp. Dimensions: 1498 x 84 x 2 mm Weight: 1 kg

Replacement reflector made of aluminum in white, can be clicked onto the light fitting without tools (mounting possible on both sides). Reflector end caps are to be ordered separately. Dimensions: 1000 x 84 x 2 mm. Weight: 0.3 kg

Replacement reflector made of aluminum in white, can be clicked onto the light fitting without tools (mounting possible on both sides). Reflector end caps are to be ordered separately. Dimensions: 1498 x 84 x 2 mm. Weight: 0.5 kg

Replacement reflector made of aluminum in silver, can be clicked onto the light fitting without tools (mounting possible on both sides). Reflector end caps are to be ordered separately. Dimensions: 1498 x 84 x 2 mm. Weight: 0.5 kg

Passive Infrared Motion Detector with TECTON Adapter, white and ED interface for sensor heights of up to 16m. For use with LITECOM or LITENET systems. For use in halls and buildings with high ceilings. Protection class: IP20, Dimensions: 248 x 98 x 67 mm, Weight: approx. 800g

Support rail made of profiled steel sheet in black. 11 conductors embedded in an integrated power profile. 5 mains conductors (5 x 2.5mm²/16A) and 2 x 2 conductors (4 x 1.5mm²/10A) for the integration of emergency lighting using two independently separated circuits and 2 conductors (2 x 1.5mm²/10A) as control line. Tool-free connection via electrical feed set. Dimensions: 1501 x 69 x 60 mm, Weight: 2.5 kg

Suspension rail for individual mounting black for the TECTON C light fittings made of profiled steel sheet coated with polyester resin paint. Connection for 6-pole included (mains 3, control line 2, emergency permanent phase 1). End caps in black are included in the delivery. Dimensions: 1013 x 60 x 54 mm, weight: 1.5 kg

Suspension rail for individual mounting black for the TECTON C light fittings made of profiled steel sheet coated with polyester resin paint. Connection for 6-pole included (mains 3, control line 2, emergency permanent phase 1). End caps in black are included in the delivery. Dimensions: 1512 x 60 x 54 mm, weight: 2.5 kg

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 172 lm/W. Light fitting luminous flux: 3,760 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 186 lm/W. Light fitting luminous flux: 3970 lm. shelf beam (shelf). Color rendering Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON MPO LED light fitting with highly efficient 192 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous efficacy: 171 lm/W. Light fitting luminous flux: 6620 lm. Color rendering Ra > 80, color temperature 4000 K. Light direction via backlit multi-layer MPO micro prism optics to minimize perceived glare and UGR values. 12% indirect light for gentle ceiling illumination. Co-extruded hollow chamber profile with glued end caps (shatterproof up to IK06) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector in a single product combined. Dimming level for DC mode preset to 15%. Base carrier of the LED light fitting made of sheet steel, powder-coated in polyester resin, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON support rail. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +35°C. Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres please consult your advisor. Dimensions: 1522 x 104 x 151 mm. Weight: 4 kg.

Linear TECTON LED light fitting with highly efficient 64 mid-power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 166 lm/W. Light fitting luminous flux: 7,630 lm. Shelf beam (shelf). Color rendering Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light strip without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 186 lm/W. Light fitting luminous flux: 5,760 lm. Shelf beam (shelf). Color rendering Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 168 lm/W. Light fitting luminous flux: 5,330 lm. Symmetrically wide-beam light fitting. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 163 lm/W. Light fitting luminous flux: 7,720 lm. Symmetrically wide beam light fitting. Color rendering index Ra > 80, color temperature 3,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optic. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

LED moisture-resistant light fitting in protection class IP20 with Drip-Edge-Effect to minimize dirt and dust deposits for highest hygienic requirements, electronic control gear with LED converter, patented InvisiClick for clip-less mounting and opening of the cover. Cover and base tray made of polycarbonate (PC) impact-resistant, temperature and UV-resistant, injection-molded in one piece. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 6,260 lm, light fitting luminous efficacy: 157 lm/W. Color rendering index Ra > 80, color temperature 4,000 K. Symmetrically wide-emitting light fitting (wide beam). High-quality direct/indirect light concept for optimal lighting solutions in parking garages and industrial applications. Light fitting with TECTON adapter for easy and quick mounting of the light fitting on the TECTON light track system. Ambient temperature: -25°C to +40°C. Approved for use in indoor areas in vertical and horizontal wall mounting (see installation instructions). Note: Before specifying for use in environments with chemical stress, high or condensing humidity as well as large temperature fluctuations, please contact your consultant. Meets the requirements of international food industry standards. Designed for BESA box. Approved for use in environments where deposition of conductive dust on the light fitting is expected (EN 60598-2-24). Protection class: SC1, 850°C glow wire tested. Light fitting halogen-free wired and silicone-free, impact resistance: IK03, dimensions: 1,611 x 92 x 152 mm, weight: 3 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 176 lm/W. Light fitting luminous flux: 3620 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light fitting without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1000 x 60 x 85 mm. Weight: 1.72 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 183 lm/W. Light fitting luminous flux: 5430 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 175 lm/W. Light fitting luminous flux: 5,440 lm. Symmetrically very wide beam light fitting. Color rendering Ra > 80, color temperature 4,000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light strip without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin, silver. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 95 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting efficacy: 174 lm/W. Light fitting luminous flux: 5180 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 3000 K. Split lens concept for reducing perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 177 lm/W. Light fitting luminous flux: 8,160 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2.41 kg.

Linear TECTON LED continuous-row luminaire with 64 highly efficient mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 148 lm/W. Luminaire luminous flux: 7,040 lm. Symmetrical, very wide-beam luminaire. Colour rendering index Ra > 80, colour temperature 3,000 K. Split lens design to reduce perceived glare. Overlapping lenses made of PMMA (shatter-resistant up to IK07) provide IP50 protection for the LEDs and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. Allows for greater spacing between the light lines whilst still achieving a high degree of uniformity in the lighting output. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip made from sheet steel, finished in black polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). Luminaire wired without halogen and silicone-free. Note: Please consult your advisor if using in environments with chemical contamination. Dimensions: 1498 x 60 x 85 mm. Weight: 2.41 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 169 lm/W. Light fitting luminous flux: 12,000 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light strip without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2.55 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100000 h up to a light output reduction to 80 % of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 147 lm/W. Light fitting luminous flux: 10550 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100 % continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15 %. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1498 x 60 x 85 mm. Weight: 2,55 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 146 lm/W. Light fitting luminous flux: 4,720 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 6,500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,000 x 60 x 85 mm. Weight: 1.5 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 175 lm/W. Light fitting luminous flux: 5,210 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 6,500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 154 lm/W. Light fitting luminous flux: 4,790 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 6,500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, black. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.2 kg.

Linear TECTON LED light fitting with highly efficient 64 Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a light output reduction to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 170 lm/W. Light fitting luminous flux: 8,070 lm. Symmetrically very wide beam light fitting. Color rendering index Ra > 80, color temperature 6,500 K. Split lens concept to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light band without interruption. Enables further distances between the light lines and yet high uniformity of the lighting result. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature -20 °C to 25 °C (ceiling-mounted), -20 °C to 35 °C (suspended). Light fitting halogen-free wired and silicone-free. Note: In case of application in chemically stressed ambient atmospheres please consult your advisor. Dimensions: 1,498 x 60 x 85 mm. Weight: 2.41 kg.

Linear TECTON LED strip light with 64 highly efficient mid-power LEDs per segment. DALI-controllable luminaire with LED converter. LED service life: 100,000 hours until luminous flux drops to 95 per cent of the initial value. Colour position tolerance (initial MacAdam): 2. Luminaire luminous efficacy: 162 lm/W. Luminaire luminous flux: 11,500 lm. Symmetrical, very wide-beam luminaire. Colour rendering index Ra > 80, colour temperature 6,500 K. Split lens design to reduce perceived glare. Overlapping lenses made of PMMA (shatterproof up to IK07) provide IP50 protection for the LEDs and optics. All-in-one solution: light bar, light source and reflector combined in a single product, enabling a 100% continuous LED light strip without interruption. Allows for greater spacing between the light lines whilst still achieving a high degree of uniformity in the lighting output. High-quality appearance matching the look of the mounting rail. Dimming level for DC mode preset to 15 per cent. LED light strip made from sheet steel, finished in white polyester resin paint. 100% flexible, tool-free mechanical and electrical installation via CLIX technology using two side-mounted rotary levers on the TECTON mounting rail. No ultraviolet or infrared radiation. Ambient temperature: –20 °C to 25 °C (ceiling-mounted), –20 °C to 35 °C (suspended mounting). The luminaire is wired without halogen and is silicone-free. Note: Please consult your advisor if using in environments with chemical contamination. Dimensions: 1498 x 60 x 85 mm. Weight: 2.55 kg.

Light fitting with TECTON Adapter for easy and quick mounting of the light fitting on the TECTON LED light band system. LED light fitting with MPO Microprism Optics, DALI controllable light fitting with LED converter, LED lifespan 100000 h up to a light output reduction to 90 % of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting luminous flux: 5430 lm, light fitting luminous efficacy: 131 lm/W. Color rendering Ra > 90, color temperature 4000 K. Light direction via MPO-plus Micropyramid Structure Optics with multilayer structure for defined output with UGR < 19 and L< 3000 cd/m² at 65° for screen applications. Light fitting made of white aluminum extruded profile consisting of optics and TECTON C-profile, color matching the TECTON busbar configurable, design end caps (available in different colors) are to be ordered separately. Light fitting halogen-free wired. Glow wire test: 650°C, Dimensions: 1512 x 120 x 76 mm, Weight: 4,6 kg

Minimalistic light fitting with TECTON Adapter for easy and quick mounting of the light fitting on the TECTON LED light fitting system, with Microprism Optics, DALI controllable light fitting with LED converter, LED lifespan 100000 h up to a light output reduction to 90 % of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 5400 lm, light fitting luminous efficacy: 122 lm/W. Color rendering index Ra > 90, color temperature 4000 K. Light direction via patented Curved Wave Guide light coupling and MPO-plus Micropyramid Structure Optics with multi-layer structure for defined coupling out with UGR < 19 and L< 3000 cd/m² at 65° for screen applications, device carrier made of white painted aluminum extruded profile, light fitting made of white aluminum extruded profile consisting of optics and TECTON C-profile, color matching the TECTON busbar configurable. Design end caps (available in different colors) are to be ordered separately. Light fitting halogen-free wired. Glow wire test: 650°C, Dimensions: 1512 x 152 x 48 mm, Weight: 7 kg

Minimalistic light fitting with TECTON Adapter for easy and quick mounting of the light fitting on the TECTON LED light bandsystem, LED light fitting with Microprism Optics, DALI controllable light fitting with LED converter, LED lifespan 100000 h up to a light output reduction to 90 % of the initial value. Color point tolerance (initial MacAdam): 3. Light fitting light output: 4330 lm, light fitting luminous efficacy: 122 lm/W. Color rendering index Ra > 90, color temperature 4000 K. Light direction via patented Curved Wave Guide light coupling and MPO-plus Micropyramid-Structure-Optics with multi-layer structure for defined decoupling with UGR < 19 and L< 3000 cd/m² at 65° for screen applications, device carrier made of white painted aluminum extruded profile, light fitting made of white aluminum extruded profile consisting of optics and TECTON C-profile, color matching the TECTON busbar configurable. Design end caps (available in different colors) are to be ordered separately. Light fitting halogen-free wired. Glow wire test: 650°C, Dimensions: 1264 x 152 x 48 mm, Weight: 6,35 kg

Linear TECTON D LED light fitting with 96 highly efficient Mid-Power LEDs per segment. DALI controllable light fitting with LED converter. LED lifespan 100,000 h up to a reduction in luminous flux to 95% of the initial value. Color point tolerance (initial MacAdam): 2. Light fitting luminous efficacy: 202 lm/W. Light fitting luminous flux: 20,060 lm. Symmetrically narrow-beam light fitting. Color rendering index Ra > 80, color temperature 4000 K. Split lens concept to reduce perceived glare. Lenses made of PMMA (shatterproof up to IK06) enable IP50 protection for LED and optics. All-in-one solution: light bar, lamp and reflector combined in a single product, enable a 100% continuous LED light fitting without interruption. High-quality appearance in the same look as the mounting rail. Dimming level for DC mode preset to 15%. LED light fitting made of sheet steel, coated in polyester resin paint, white. 100% flexible and tool-free mechanical and electrical installation via CLIX technology with two laterally attached rotary levers on the TECTON mounting rail. No ultraviolet and infrared radiation. Ambient temperature: -20°C to +35°C. Light fitting halogen-free wired and silicone-free. Note: For use in chemically contaminated ambient atmospheres, please consult your advisor. Dimensions: 2500 x 60 x 98 mm. Weight: 3.44 kg.

Spare part for TECTON spare parts product family. Touch protection support rail made of polyamide (PA), white. Weight: 0.01 kg

Replacement part for TECTON spare parts product family. Darklight Raster 35/49/80W made of anodized aluminum, high-gloss. Dimensions: 1471 mm x 92 mm x 53 mm. Weight: 0.36 kg

Replacement part for TECTON replacement parts product family. Perforated grid 35/49/80W made of white painted steel sheet, perforated. Dimensions: 1468 mm x 88 mm x 21 mm. Weight: 0.52 kg

LED spotlight for brilliant accentuation on vertical surfaces, displays and shelves in the shop and retail sector, Zumtobel patented free-form reflector technology liteCarve® for uniform, rectangular light distribution, starting from an LED point light source, the liteCarve® reflector directs the light 100% indirectly, precisely and without stray light onto the vertical surface, light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting on the TECTON light track system, Equipment: 1/42W LED3400-840, Color rendering Ra > 80, Color temperature 4000 K (neutral white), Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 3696 lm, Light fitting luminous efficacy: 88 lm/W, Service life: 50000h at 85% luminous flux, Light head rotatable by ±90° and pivotable by -5°/+40°, with latest LED technology, passive cooling through innovative heat management, Light head made of aluminum die casting and polycarbonate (PC), Color: white, Reflector: Polycarbonate (PC), aluminum sputtered, high-gloss and iridescence-free, Light fitting halogen-free wired, Mains voltage: 230V/ 50/60Hz, Dimensions: 598x125x162 mm, Weight: 2.3 kg,Note: Distance to the illuminated surface: 1/3 of the installation height (optimal room height: 3m), not suitable for point outlet version!

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color white, Switchable light fitting, Color rendering Ra > 80, Color temperature 3000 K (warm white), Light fitting or spotlight with vertical light optics (homogeneous illumination of walls and vertical surfaces) 43°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 2600 lm, Light fitting luminous efficacy: 98 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and pivotable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-casting, Surface: white microstructured lacquer, Excellent anti-glare through front ring made of white polycarbonate (PC), Front ring serves to accommodate accessories (optics, protective glass, honeycomb grid), Mirror reflector made of aluminum-coated polycarbonate (PC), highly glossy, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, mid-feeders and end-feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color white, switchable light fitting, Color rendering Ra > 80, Color temperature 4000 K (neutral white), Light fitting or spotlight with SPOT beam characteristic 15°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 3100 lm, Light fitting luminous efficacy: 117 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and pivotable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die casting, Surface: white microstructured lacquer, Excellent anti-glare through front ring made of white polycarbonate (PC), Front ring for accessory mounting (optics, protective glass, honeycomb grid), Mirror reflector made of aluminum-coated polycarbonate (PC), highly glossy, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color white, switchable light fitting, Color rendering Ra > 80, Color temperature 4000 K (neutral white), Light fitting with VERY WIDEFLOOD beam angle 52°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 3000 lm, Light fitting luminous efficacy: 113 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and tiltable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-casting, Surface: white microstructured lacquer, Excellent anti-glare through front ring made of white polycarbonate (PC), Front ring serves to accommodate accessories (optics, protective glass, honeycomb grid), Mirror reflector made of aluminum-coated polycarbonate (PC), highly glossy, iridescence-free, Mirror reflector designed as a replaceable reflector, retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color white, switchable light fitting, Color rendering Ra > 90, Color temperature 3500 K (neutral white), Light fitting or spotlight with MEDIUMSPOT beam characteristic 19°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 2600 lm, Light fitting luminous efficacy: 98 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and tiltable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-casting, Surface: white microstructured lacquer, Excellent anti-glare through front ring made of white polycarbonate (PC), Front ring serves to accommodate accessories (optics, protective glass, honeycomb grid), Mirror reflector made of aluminum-coated polycarbonate (PC), highly glossy, iridescence-free, Mirror reflector designed as interchangeable reflector, retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color white, Switchable light fitting, Color rendering Ra > 90, Color temperature 4000 K (neutral white), Light fitting or spotlight with vertical light optics (homogeneous illumination of walls and vertical surfaces) 43°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 2300 lm, Light fitting luminous efficacy: 87 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and pivotable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-casting, Surface: white microstructured lacquer, Excellent anti-glare through front ring made of polycarbonate (PC) white, Front ring serves to accommodate accessories (optics, protective glass, honeycomb grid), Mirror reflector made of polycarbonate (PC) aluminum-coated, high-gloss, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, mid-feeders and end-feeders

LED spotlight with a special light spectrum tailored to the entire food color palette, optimized for efficient and powerful accent lighting in retail applications (supermarket / food), spotlight with converter InHouse mounted on the TECTON GP adapter, light fitting with TECTON GP (grand profile) adapter for easy and quick installation of the light fitting on the TECTON light track system, switchable light fitting, adapter color white, color temperature matched to baked goods Ra 90, light fitting with WIDEFLOOD beam angle 43°, color point tolerance (initial MacAdam): 2, light fitting luminous flux: 2600 lm, light fitting efficacy: 74 lm/W, lifespan: 50000h at 85% luminous flux, mains voltage: 220-240 V / 50/60 Hz, spotlight rotatable by 360° and tiltable by 90°, converter integrated in the spotlight housing, spotlight housing made of aluminum die-cast, surface: white microstructured lacquer, excellent anti-glare through front ring made of white polycarbonate (PC), front ring for mounting accessories (optics, protective glass, honeycomb grid), mirror reflector made of aluminum-coated polycarbonate (PC), high-gloss, iridescence-free, mirror reflector designed as interchangeable reflector, upgradeable, dimensions: 249x95x208 mm, weight: 1.05 kg, attachment of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology, spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color black, Switchable light fitting, Color rendering Ra > 80, Color temperature 3000 K (warm white), Light fitting with VERY WIDEFLOOD beam characteristic 52°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 2800 lm, Light fitting luminous efficacy: 106 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and pivotable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-casting, Surface: black microstructured lacquer, Excellent anti-glare through front ring made of polycarbonate (PC) black, Front ring serves to accommodate accessories (optics, protective glass, honeycomb grid), Mirror reflector made of polycarbonate (PC) aluminum-coated, highly glossy, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color black, Switchable light fitting, Color rendering index Ra > 90, Color temperature 3500 K (neutral white), Light fitting with VERY WIDEFLOOD beam angle 52°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 2400 lm, Light fitting luminous efficacy: 91 lm/W, Lifespan: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and tiltable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-cast, Surface: black microstructured lacquer, Excellent anti-glare through front ring made of polycarbonate (PC) black, Front ring for mounting accessories (optics, protective glass, honeycomb grid), Mirror reflector made of polycarbonate (PC) aluminum-coated, high-gloss, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x95x208 mm, Weight: 1,05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with special light spectrum tailored to the entire food color palette, optimized for efficient and powerful accent lighting in retail applications (supermarket / food), spotlight with converter InHouse mounted on the TECTON GP adapter, light fitting with TECTON GP (grand profile) adapter for easy and quick installation of the light fitting on the TECTON light track system, switchable light fitting, adapter color black, color temperature tuned for fish Ra 97, light fitting with WIDEFLOOD beam characteristic 43°, color point tolerance (initial MacAdam): 2, light fitting luminous flux: 3100 lm, light fitting luminous efficacy: 89 lm/W, lifespan: 50000h at 85% luminous flux, mains voltage: 220-240 V / 50/60 Hz, spotlight rotatable by 360° and tiltable by 90°, converter integrated in the spotlight housing, spotlight housing made of aluminum die-casting, surface: black microstructured lacquer, excellent anti-glare through front ring made of polycarbonate (PC) black, front ring for accessory mounting (optics, protective glass, honeycomb grid), mirror reflector made of polycarbonate (PC) aluminum-coated, highly glossy, iridescence-free, mirror reflector designed as interchangeable reflector, upgradeable, dimensions: 249x95x208 mm, weight: 1.05 kg, attachment of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Spotlight with converter InHouse mounted on the TECTON GP adapter, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Switchable light fitting, Adapter color white, Color rendering Ra > 80, Color temperature 3000 K (warm white), Light fitting or spotlight with SPOT beam characteristic 14°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 3800 lm, Light fitting luminous efficacy: 112 lm/W, Service life: 50000h at 90% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and pivotable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die casting, Surface: white microstructured lacquer, Excellent anti-glare through front ring made of white polycarbonate (PC), Front ring for mounting accessories (optics, protective glass, honeycomb grid), Mirror reflector made of aluminum-coated polycarbonate (PC), highly glossy, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x115x252 mm, Weight: 1.45 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, adapter color white, switchable light fitting, color rendering Ra > 80, color temperature 3000 K (warm white), light fitting or spotlight with FLOOD beam characteristic 25°, color point tolerance (initial MacAdam): 2, light fitting luminous flux: 3900 lm, light fitting luminous efficacy: 111 lm/W, service life: 50000h at 85% luminous flux, mains voltage: 220-240 V / 50/60 Hz, spotlight rotatable by 360° and pivotable by 90°, converter integrated in the spotlight housing, spotlight housing made of aluminum die-casting, surface: white microstructured lacquer, excellent anti-glare through front ring made of white polycarbonate (PC), front ring serves to accommodate accessories (optics, protective glass, honeycomb grid), mirror reflector made of aluminum-coated polycarbonate (PC), highly glossy, iridescence-free, mirror reflector designed as a replaceable reflector, upgradeable, dimensions: 249x95x208 mm, weight: 1.05 kg, attachment of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,spotlight is not mountable via feeders, center feeders and end feeders

LED spotlight with stabilized color temperature, Optimized for efficient and powerful accent lighting in retail/automotive applications as well as architectural lighting, Light fitting with TECTON GP (grand profile) adapter for easy and quick mounting of the light fitting to the TECTON light track system, Adapter color white, switchable light fitting, Color rendering Ra > 80, Color temperature 4000 K (neutral white), Light fitting or spotlight with FLOOD beam characteristic 25°, Color point tolerance (initial MacAdam): 2, Light fitting luminous flux: 4000 lm, Light fitting luminous efficacy: 114 lm/W, Service life: 50000h at 85% luminous flux, Mains voltage: 220-240 V / 50/60 Hz, Spotlight rotatable by 360° and pivotable by 90°, Converter integrated in the spotlight housing, Spotlight housing made of aluminum die-casting, Surface: white microstructured lacquer, Excellent anti-glare via front ring made of polycarbonate (PC) white, Front ring for mounting accessories (optics, protective glass, honeycomb grid), Mirror reflector made of polycarbonate (PC) aluminum-coated, high-gloss, iridescence-free, Mirror reflector designed as interchangeable reflector, Retrofittable, Dimensions: 249x95x208 mm, Weight: 1.05 kg, Mounting of the spotlight with TECTON GP adapter (grand profile) to the support rail using CLIX technology,Spotlight is not mountable via feeders, center feeders and end feeders