Advantages:
Lamp survival rate: ≥ 99% at 16,000 hours of burning time (for ≥70 W),
Reduction of maintenance effort possible through fewer premature failure rates compared to conventional sodium vapor lamps,
Changeover cycle of 6 years possible,
Application areas:
Suitable for outdoor use in open light fittings,
Functional street and residential area lighting,
Industrial lighting,
Tunnels,
Properties:
Ellipsoidal outer bulb with white inner coating,
APIA technology (Active Philips Integrated Antenna) for long and reliable service life of up to 6 years,
Plus concept for high luminous flux and high efficiency,
Dimmable with electronic control gear or 2-stage magnetic control gear,
Complies with the ErP directive for sodium vapor lamps,
Warnings and safety instructions:
Control gear must be equipped with end-of-life protection device (IEC60662, IEC 62035),
It is very unlikely that the glass breakage of a lamp has negative effects on your health. If a glass breakage occurs, ventilate the room for 30 minutes and remove the splinters preferably with gloves. Put the splinters in a sealable plastic bag and hand it in at the recycling center. Do not use a vacuum cleaner.
Reliable solution with fewer premature failures than conventional high-pressure sodium vapor lamps due to the APIA technology (Active Philips Integrated Antenna)Lamp power: 154.0W, Mercury-free: No, Overall length: 227mm, Diameter: 91mm, Number of burners: 1, Plant illumination: No, Design: opal, Replacement for mercury vapor lamp: No, Energy efficiency class: F, Weighted energy consumption in 1,000 hours: 154kWh, Average rated service life: 45000h, Luminous flux: 17600lm, Lamp designation: other, Base: E40, Lamp shape: ellipsoid, Color Rendering Index CRI: 20-39, Color temperature: 2000K, Lamp luminous efficacy: 113.64lm/W, External igniter required: Yes, External control gear required: YesEAN/GTIN: 8727900927450GPC/12NC: 928150919827
A reliable solution with fewer early failures than conventional high-pressure sodium vapour lamps, thanks to APIA technology (Active Philips Integrated Antenna)Lamp power: 100.0W, Mercury-free: No, total length: 186 mm, diameter: 76 mm, number of burners: 1, plant lighting: No, finish: opal, replacement for mercury vapour lamp: No, energy efficiency class: F, weighted energy consumption over 1,000 hours: 100 kWh, average rated lifespan: 40,000 h, luminous flux: 10,000 lm, lamp designation: other, base: E40, Lamp shape: ellipsoidal, Colour rendering index (CRI): 20–39, Colour temperature: 1,950 K, Luminous efficacy: 100 lm/W, External ballast required: Yes, External ballast required: YesEAN/GTIN: 8727900927436GPC/12NC: 928150819827
Reliable solution with fewer early failures than conventional high-pressure sodium vapour lamps thanks to APIA technology (Active Philips Integrated Antenna)Lamp wattage: 74.0W, Mercury-free: No, Total length: 156mm, Diameter: 71mm, Number of burners: 1, Plant lighting: No, Finish: opal, Replacement for mercury vapour lamp: No, Energy efficiency class: G, Weighted energy consumption in 1.000 hours: 74kWh, Average rated life: 40000h, Luminous flux: 6600lm, Lamp designation: other, Base: E27, Lamp shape: ellipsoid, Colour rendering index CRI: 20-39, Colour temperature: 1900K, Lamp luminous efficacy: 89.19lm/W, External ignitor required: Yes, External ballast required: YesEAN/GTIN: 8727900928174GPC/12NC: 928150719835