LED tubes with integrated microwave sensor for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Integrated motion detector with microwave technology. Automatic dimming to 20% light output after 5 minutes without motion detection. Automatic light switch-off 7 minutes after the last motion detection. Microwave sensor with 5.8 GHz. Motion detection of up to 5 m. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Energy saving of up to 67% compared to the conventional fluorescent lamp. Suitable for closed light fittings thanks to microwave technology. Very high switching strength. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Corridors, stairwells and parking garages. Warehouses. Halls and corridors. Logistics areas, traffic buildings and corridors. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Recommended maximum mounting height: 5 m. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, rated current: 88mA, power factor: 0.90, lamp power: 19.30W, voltage type: AC, suitable for EVG: No, suitable for magnetic control gear: Yes, luminous flux: 3100lm, rated luminous flux according to IEC 62612: 3100lm, lamp luminous efficacy: 160lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 4000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 26.70mm, length: 1513.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: C, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1.000 hours: 20.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: Yes, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854045066

LED tubes with integrated microwave sensor for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Integrated motion detector with microwave technology. Automatic dimming to 20% light output after 5 minutes without motion detection. Automatic light switch-off 7 minutes after the last motion detection. Microwave sensor with 5.8 GHz. Motion detection of up to 5 m. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Energy saving of up to 67% compared to the conventional fluorescent lamp. Suitable for closed light fittings thanks to microwave technology. Very high switching strength. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Corridors, stairwells and parking garages. Warehouses. Halls and corridors. Logistics areas, transport buildings and corridors. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Recommended maximum mounting height: 5 m. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 32mA, Power factor: 0.90, Lamp power: 6.80W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 161lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 7.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: Yes, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854044472

LED tubes with integrated microwave sensor for electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Integrated motion detector with microwave technology. Automatic dimming to 20% light output after 5 minutes without motion detection. Automatic light switch-off 7 minutes after the last motion detection. Microwave sensor with 5.8 GHz. Motion detection of up to 5 m. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Degree of protection: IP20. Mercury-free and RoHS-compliant. Product advantages: Energy saving of up to 67% compared to the conventional fluorescent lamp. Suitable for closed light fittings thanks to microwave technology. Very high switching strength. Easy, quick and safe replacement of a fluorescent lamp without rewiring the KVG. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+50°C. Corridors, stairwells and parking garages. Warehouses. Halls and corridors. Logistics areas, traffic buildings and corridors. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Recommended maximum mounting height: 5 m. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220V, Rated current: 60mA, Power factor: 0.90, Lamp power: 13.10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2100lm, Rated luminous flux according to IEC 62612: 2100lm, Lamp luminous efficacy: 160lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 14.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: Yes, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854044960