LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 88mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 3100lm, Rated luminous flux according to IEC 62612: 3100lm, Lamp luminous efficacy: 155lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1.000 hours: 20.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026638

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 38mA, Power factor: 0.80, Lamp power: 7.50W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 1000lm, Rated luminous flux according to IEC 62612: 1000lm, Lamp luminous efficacy: 133lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Glass/cover finish: Matt, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color temperature: 3000K, Beam angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, No dimming function: Yes, Diameter: 27.80mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 8.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026119

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature at the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter supplied with the LED tube packaging. All electrical connections may only be carried out by qualified personnel. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 38mA, power factor: 0.80, lamp power: 7.50W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 1100lm, rated luminous flux according to IEC 62612: 1100lm, lamp luminous efficacy: 146lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: matt, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 4000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 603.00mm, degree of protection (IP): IP20, energy efficiency class according to EU directive 2019/2015: D, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 8.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026157

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature at the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections may only be carried out by qualified personnel. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 88mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 3100lm, Rated luminous flux according to IEC 62612: 3100lm, Lamp luminous efficacy: 155lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 20.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026614

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 88mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 2800lm, Rated luminous flux according to IEC 62612: 2800lm, Lamp luminous efficacy: 140lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 20.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026652

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 38mA, power factor: 0.80, lamp power: 7.50W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 1100lm, rated luminous flux according to IEC 62612: 1100lm, lamp luminous efficacy: 146lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: matt, light color according to EN 12464-1: daylight white >5300 K, base: G13, color temperature: 6500K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 603.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: D, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 8.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026218

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 63mA, Power factor: 0.90, Lamp power: 14.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 2100lm, Rated luminous flux according to IEC 62612: 2100lm, Lamp luminous efficacy: 150lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1211.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026393

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature at the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 63mA, Power factor: 0.90, Lamp power: 14.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 2100lm, Rated luminous flux according to IEC 62612: 2100lm, Lamp luminous efficacy: 150lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matt, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1211.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026430

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage, shatter protection. Product properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Lamp tube made of glass with shatter protection. For particularly homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 60,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 66% (compared to T8 fluorescent lamp). Very high switching strength. High luminous flux for demanding lighting tasks. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature at the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 63mA, power factor: 0.90, lamp power: 14.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 1900lm, rated luminous flux according to IEC 62612: 1900lm, lamp luminous efficacy: 135lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, glass/cover finish: frosted, light color according to EN 12464-1: warm white <3300 K, base: G13, color temperature: 3000K, beam angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 1211.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: D, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 14.00kWh, average rated service life: 60000h, remote control possible: No, with motion detector: No, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026492