LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or on mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Tube made of glass. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 75mA, power factor: 0.90, lamp power: 18.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 1850lm, rated luminous flux according to IEC 62612: 1850lm, lamp luminous efficacy: 102lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: warm white <3300 K, base: G13, color temperature: 3000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 1211.00mm, degree of protection (IP): IP20, energy efficiency class according to EU directive 2019/2015: F, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 18.00kWh, average rated service life: 30000h, remote control possible: No, with motion detector: No, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026317

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or on mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass tube. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 110mA, power factor: 0.90, lamp power: 24.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 2550lm, rated luminous flux according to IEC 62612: 2550lm, lamp luminous efficacy: 106lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: warm white <3300 K, base: G13, color temperature: 3000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 1513.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: F, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 24.00kWh, average rated service life: 30000h, remote control possible: No, with motion detector: No, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026416

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or on mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Tube made of glass. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 39mA, power factor: 0.80, lamp power: 8.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 900lm, rated luminous flux according to IEC 62612: 900lm, lamp luminous efficacy: 112lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: matt, light color according to EN 12464-1: daylight white >5300 K, base: G13, color temperature: 6500K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 603.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: E, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 8.00kWh, average rated service life: 30000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026553

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or on mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Tube made of glass. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp-room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 75mA, Power factor: 0.90, Lamp power: 18.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 2000lm, Rated luminous flux according to IEC 62612: 2000lm, Lamp luminous efficacy: 111lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1211.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 18.00kWh, Average rated service life: 30000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026355

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Tube made of glass. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, Rated current: 110mA, Power factor: 0.90, Lamp power: 24.00W, Voltage type: AC, Suitable for EVG: Yes, Suitable for magnetic control gear: Yes, Luminous flux: 2800lm, Rated luminous flux according to IEC 62612: 2800lm, Lamp luminous efficacy: 116lm/W, Color rendering index CRI: 80-89, Lamp shape: Tube, double-ended, Filament lamp: No, Design glass/cover: Matt, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 27.80mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 24.00kWh, Average rated service life: 30000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026454

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or at mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass tube. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature at the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 75mA, power factor: 0.90, lamp power: 18.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 2000lm, rated luminous flux according to IEC 62612: 2000lm, lamp luminous efficacy: 111lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: matt, light color according to EN 12464-1: daylight white >5300 K, base: G13, color temperature: 6500K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 1211.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: E, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1.000 hours: 18.00kWh, average rated service life: 30000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026379

LED tubes for electronic ballasts (EVG), electromagnetic ballasts (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in electromagnetic ballast, electronic ballast luminaires or mains voltage applications. Compatible with conventional and many standard electronic ballasts (see also compatibility list) and mains voltage. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Glass tube. Uniform illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 58% (compared to T8 fluorescent lamps). Very high switching durability. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20 to +45 °C. Corridors, stairwells and car parks. Industry. Warehouses. Cold stores and storage rooms. Domestic applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there is any doubt regarding the suitability of the application, please measure the maximum Tc temperature on the product before installation. To operate the LED TUBE T8 UN with a conventional ballast, the existing starter must be replaced with the LED starter supplied in the LED tube packaging. All electrical connections must only be carried out by qualified personnel. Not suitable for emergency lighting.Rated voltage: 220V, Rated current: 110mA, Power factor: 0.90, Lamp power: 24.00W, Voltage type: AC, Suitable for electronic ballast: Yes, Suitable for magnetic ballast: Yes, Luminous flux: 2800 lm, Rated luminous flux according to IEC 62612: 2800 lm, Lamp luminous efficacy: 116 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: Tube, double-ended, Filament lamp: No, Glass/cover finish: Frosted, Light colour according to EN 12464-1: Daylight white >5300 K, Base: G13, Colour temperature: 6500 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Non-dimmable: Yes, Diameter: 27.80 mm, Length: 1513.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: E, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 24.00 kWh, Average rated lifespan: 30,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026478

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or on mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass tube. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature on the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel only. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 39mA, power factor: 0.80, lamp power: 8.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 800lm, rated luminous flux according to IEC 62612: 800lm, lamp luminous efficacy: 100lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: warm white <3300 K, base: G13, color temperature: 3000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 603.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: F, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 8.00kWh, average rated service life: 30000h, remote control possible: No, with motion detector: No, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026515

LED tubes for electronic control gear (EVG), electromagnetic control gear (KVG/VVG) and mains voltage. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG, EVG light fittings or on mains voltage. Compatible with conventional and many commercially available electronic control gear (see also compatibility list) and mains voltage. Flicker-free according to EU 2019/2020 (SVM ≤0.4 / PstLM ≤1). Glass tube. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Service life: up to 30,000 h. Product advantages: No sagging thanks to glass technology. Easy, quick and safe lamp replacement without rewiring. Energy saving of up to 58% (compared to T8 fluorescent lamp). Very high switching strength. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20...+45 °C. Corridors, stairwells and parking garages. Industry. Warehouses. Cold and storage rooms. Household applications. Supermarkets and department stores. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. The operating temperature range of the LED tube is limited. If there are doubts about the suitability of the application, please measure the maximum Tc temperature at the product before installation. For operation of the LED TUBE T8 UN with a conventional control gear, the existing starter must be replaced with the LED starter included in the LED tube packaging. All electrical connections must be carried out by qualified personnel. Not suitable for emergency lighting. Rated voltage: 220V, rated current: 39mA, power factor: 0.80, lamp power: 8.00W, voltage type: AC, suitable for EVG: Yes, suitable for magnetic control gear: Yes, luminous flux: 900lm, rated luminous flux according to IEC 62612: 900lm, lamp luminous efficacy: 112lm/W, color rendering index CRI: 80-89, lamp shape: tube, double-ended, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color temperature: 4000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, trailing-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 27.80mm, length: 603.00mm, degree of protection (IP): IP20, energy efficiency class according to EU Directive 2019/2015: E, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 8.00kWh, average rated service life: 30000h, remote control possible: No, with motion detector: No, with remote control: No, with dusk sensor: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854026539