Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button terminal block. Through-wiring with included junction box possible. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 28.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 130.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 620 mA, Electronic control gear - output ripple current: 3.0 %, Electronic control gear - length: 119.0 mm, Electronic control gear - width: 45 mm, Electronic control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 5 W, Light st

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring with included connection box possible. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Connection box with 5-pole connection terminal included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 28.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 130.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings fuse C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage strength (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 130 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 620 mA, Control gear - Output ripple current: 3.0 %, Control gear - Length: 119.0 mm, Control gear - Width: 45 mm, Control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency mode: 5 W, Light st

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring with included junction box possible. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole connection terminal included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 150.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 4320 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 730 mA, Control gear - output ripple current: 3.0 %, Control gear - length: 119.0 mm, Control gear - width: 45 mm, Control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency mode: 6 W, Light st

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring possible with included junction box. Energy saving thanks to high system light output: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole connection terminal included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 150.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 4320 lm, Light output: 130 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 730 mA, Electronic control gear - output ripple current: 3.0 %, Electronic control gear - length: 119.0 mm, Electronic control gear - width: 45 mm, Electronic control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 6 W, Light st