"Product advantages: Energy saving thanks to high system luminous efficacy: up to 140 lm/W. High color consistency with SDCM 3. Through-wiring possible. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Versions with screen workplace-compatible anti-glare (U19) availableProduct properties: Frame made of extruded aluminum, metal housing. Polystyrene diffuser. Service life (L80/B10): up to 75,000 h (at 25 °C). 3-pole connection terminal, cable cross-section up to 3 x 1.5 mm². Degree of protection: IP50 (recessed light fitting), IP20 (driver)Technical equipment: Accessories for various installation options available. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Suitable for operation with Emergency Conversion Box. Replacement driver available separatelySafety instructions: All electrical connections must only be carried out by qualified personnel. The flexible external cable of this light fitting cannot be replaced; if the cable is damaged, the light fitting must be disposed of. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 26.00 W, Rated voltage: 220…240 V, Mains frequency: 50/60 Hz, Rated current: 120.000 mA, Inrush current: 23 A, Inrush current duration Th50: 95 µs, Max. Number of light fittings circuit breaker B16: 25, Max. No. of light fittings on fuse switch C10 A: 21, Max. Number of light fittings circuit breaker C16: 34, Power factor ?: 0.9, Protection class: II, Impulse voltage strength (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 140 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Photobiological risk group according to EN62471: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620.00 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+45 °C, Storage temperature range: -20…+70 °C, Connection type: Screwless connection terminal, Degree of protection: IP50/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: No, Type of mounting: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Mechanically adjustable: No, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 75000 h, Service life L90/B10 at 25 °C: 35000 h, Number of switching cycles: 100000Control gear: Output current: 700 mA, EVG - Output ripple current: 0.05 %, EVG - Length: 175.00 mm, EVG - Width: 55.00 mm, EVG - Height: 30.00 mm, Recommended control gear: DR DS-V-26/220-240/700 PL COMPEmergency lighting: Type of emergency light function (EL): Emergency light unit (battery and control device) for decentralized application separately available, Power in emergency operation: 4 W, Luminous flux in emergency operation: 500Certificates & Standards: Standards: CE; CB; ENEC; UKCA; EAC; EPD, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, EPD: LEDV-00075-V01.01-EN, Replaceable light source (EPREL): Not replaceableAdditional product data: BEG eligible: YesPRODUCT DATA SHEET ON ENVIRONMENTAL PROPERTIES AND CHARACTERISTICS: Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled

Rectangular recessed light fittings with strong anti-glare, for 1200 x 300 mm ceiling systems. Product features: Frame made of extruded aluminum. Polystyrene diffuser. Service life (L80/B10): up to 50,000 h (at 25 °C). Product advantages: Good anti-glare (UGR < 19). Flicker-free light thanks to special electronic control gear. Energy saving thanks to system luminous efficacy of up to 110 lm/W. External driver with optional 3-pole through-wiring possibility. Versions with DALI-EVG available. Areas of application: Direct replacement for light fittings with fluorescent lamps. Office spaces, conference rooms. Reception areas, entrance areas, corridors, elevators. Suitable for ceiling installation systems with a grid size of 1200 x 300 mm. Technical equipment: Accessories for various installation options available. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Suitable for operation with Emergency Conversion Box. Connection box with 5-pole terminal for through-wiring for cable cross-sections up to 2.5 mm² separately available.Wall mounting: No, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: Yes, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Screen workstation suitable according to EN 12464-1: Yes, With lamp: Yes, Material of the housing: Aluminum, Housing color: white, Design of the grid: high-gloss, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 150mA, With operating gear: Yes, Replaceable operating gear: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM5, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated service life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 61, Max. Number of light fittings circuit breaker C16: 78, Degree of protection (IP): IP40, Impact resistance: IK02, Protection class: II, Light fitting with limited surface temperature D-mark: No, Rated ambient temperature according to IEC62722-2-1: -10-45°C, Suitable for emergency lighting: Yes, Emergency power supply integrated: No, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 33.00W, Light fitting luminous efficacy: 110lm/W, Rated luminous flux according to IEC 62722-2-1: 3630lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 295.00mm, Height/Depth: 34.00mm, Length: 1195.00mm, Installation length: 1190.00mm, Installation width: 290.00mm, Installation height/-depth: 50mm, Type of wiring: suitable for through-wiring, Number of poles: 2, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Anti-glare (UGR): 19, Adjustable color temperature: no, Adjustable light flux: no, Adjustable radiation angle: no, Operation via Bluetooth: No, Compatible with Casambi: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Meets min. EIA service life criterion L90 (at 50,000 h at tq = 25 °C): NoEAN/GTIN: 4099854017209

Square recessed light fittings with strong anti-glare, for 625 x 625 mm ceiling systems and DALI-2 technology. Product features: Suitable for use with central battery systems according to EN60598-2-22. Push-DIM function for switching and dimming directly at the wall switch. Frame made of extruded aluminum. Polystyrene diffuser. Service life (L80/B10): up to 50,000 h (at 25 °C). Product advantages: Good anti-glare (UGR < 19). Flicker-free light thanks to special electronic control gear. External driver for extended flexibility and easy installation. Suitable for emergency lighting. Areas of application: Direct replacement for light fittings with fluorescent lamps. Office spaces, conference rooms. Reception areas, entrance areas, corridors, elevators. Suitable for ceiling installation systems with a grid size of 625 x 625 mm. Technical equipment: Accessories for various installation options available. Safety clamps pre-installed. External control gear included. Suitable for operation with Emergency Conversion Box. Junction box with 5-pole terminal for through-wiring for cable cross-sections up to 2.5 mm² separately available.Wall mounting: No, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: Yes, Suitable for surface mounting: Yes, Suitable for light track configuration: No, Screen workstation compliant according to EN 12464-1: Yes, With lamp: Yes, Material of the housing: Steel, Housing color: white, Design of the grid: high-gloss, Type of voltage: AC/DC, Rated voltage: 220-240V, Rated current: 190mA, Operating device: EVG, With operating device: Yes, Replaceable operating device: Yes, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: Yes, Dimming DALI: Yes, Dimming DMX: No, Dimming DSI: No, Dimming Potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: Yes, Dimming Zigbee: No, Dimming with push-button: Yes, Without dimming function: No, Light distributor: Diffuser lens/-optics/-panel, Color consistency (McAdam ellipse): SDCM5, Light exit: direct, Energy efficiency class of the light source according to EU Directive 2019/2015: not required, Rated service life L70/B50 at 25 °C: 70000h, Max. Number of light fittings circuit breaker B16: 83, Max. Number of light fittings circuit breaker C16: 83, Degree of protection (IP): IP40, Impact resistance: IK02, Protection class: II, Light fitting with limited surface temperature D-mark: No, Rated ambient temperature according to IEC62722-2-1: -10-45°C, Suitable for emergency lighting: Yes, Emergency power supply integrated: No, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 33.00W, Light fitting luminous efficacy: 110lm/W, Rated luminous flux according to IEC 62722-2-1: 3630lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Constant light output control: No, Width: 620.00mm, Height/Depth: 32.00mm, Length: 620.00mm, Installation length: 600.00mm, Installation width: 600.00mm, Installation height/-depth: 50mm, Type of wiring: suitable for through-wiring, Number of poles: 4, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG0, Anti-glare (UGR): 19, Adjustable color temperature: no, Adjustable luminous flux: no, Adjustable radiation angle: no, Operation via Bluetooth: No, Compatible with Casambi: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Meets min. EIA service life criterion L90 (at 50,000 h at tq = 25 °C): NoEAN/GTIN: 4099854017483

**Product advantages:** Energy saving thanks to high system luminous efficacy: up to 140 lm/W. High color consistency with SDCM 3. Through-wiring possible. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Versions with screen workplace-compatible anti-glare (U19) available**Product properties:** Frame made of extruded aluminum, metal housing. Polystyrene diffuser. Service life (L80/B10): up to 75,000 h (at 25 °C). 3-pole connection terminal, cable cross-section up to 3 x 1.5 mm². Degree of protection: IP50 (recessed light fitting), IP20 (control gear)**Technical equipment:** Accessories for various installation options available. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Suitable for operation with Emergency Conversion Box. Replacement driver available separately**Safety instructions:** All electrical connections must only be carried out by qualified personnel. The flexible external cable of this light fitting cannot be replaced; if the cable is damaged, the light fitting must be disposed of. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.**Electrical data:** Rated power: 26.00 W, Rated voltage: 220…240 V, Mains frequency: 50/60 Hz, Rated current: 120.000 mA, Inrush current: 23 A, Inrush current duration Th50: 95 µs, Max. Number of light fittings circuit breaker B16: 25, Max. Number of light fittings on fuse switch C10 A: 21, Max. Number of light fittings circuit breaker C16: 34, Power factor ?: 0.9, Protection class: II, Surge voltage resistance (L – N): 1000 V, Operating mode: External LED driver**Photometric data:** Luminous flux: 3640 lm, Luminous efficacy: 140 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Photobiological risk group according to EN62471: RG0, Radiation angle: 110 °**Dimensions & Weight:** Length: 620.00 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 1600.00 g**Materials & Colors:** Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mg**Application & Installation:** Ambient temperature range: -10…+45 °C, Storage temperature range: -20…+70 °C, Connection type: Screwless connection terminal, Degree of protection: IP50/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: No, Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Mechanically adjustable: No, With lamp: Yes, Replaceable light source unit: No**Service life:** Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 75000 h, Service life L90/B10 at 25 °C: 35000 h, Number of switching cycles: 100000**Control gear:** Output current: 700 mA, Electronic control gear - Output ripple current: 0.05 %, Electronic control gear - Length: 175.00 mm, Electronic control gear - Width: 55.00 mm, Electronic control gear - Height: 30.00 mm, Recommended control gear: DR DS-V-26/220-240/700 PL COMP**Emergency lighting:** Type of emergency light function (EL): Emergency light unit (battery and control device) for decentralized application separately available, Power in emergency operation: 4 W, Luminous flux in emergency operation: 500**Certificates & Standards:** Standards: CE; CB; ENEC; UKCA; EAC; EPD, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, EPD: LEDV-00075-V01.01-EN, Replaceable light source (EPREL): Not replaceable**Additional product data:** Eligible for BEG funding: Yes**PRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES:** Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled material

Product advantages: Energy saving thanks to high system luminous efficacy: up to 140 lm/W. High color consistency with SDCM 3. Through-wiring possible. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Versions with screen workplace-compatible anti-glare (U19) availableProduct properties: Frame made of extruded aluminum, metal housing. Polystyrene diffuser. Service life (L80/B10): up to 75,000 h (at 25 °C). 3-pole terminal block, cable cross-section up to 3 x 1.5 mm². Degree of protection: IP50 (recessed light fitting), IP20 (control gear)Technical equipment: Accessories for various installation options available. Safety cable for light fittings included. Safety clamps pre-mounted. External control gear included. Suitable for operation with Emergency Conversion Box. Replacement driver available separatelySafety instructions: All electrical connections must only be carried out by qualified personnel. The flexible external cable of this light fitting cannot be replaced; if the cable is damaged, the light fitting must be disposed of. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 26.00 W, Rated voltage: 220…240 V, Mains frequency: 50/60 Hz, Rated current: 120.000 mA, Inrush current: 23 A, Inrush current duration Th50: 95 µs, Max. Number of light fittings circuit breaker B16: 25, Max. No. of light fittings on fuse switch C10 A: 21, Max. Number of light fittings circuit breaker C16: 34, Power factor ?: 0.9, Protection class: II, Impulse voltage strength (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 140 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Photobiological risk group according to EN62471: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620.00 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+45 °C, Storage temperature range: -20…+70 °C, Connection type: Screwless terminal block, Degree of protection: IP50/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: No, Type of mounting: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Mechanically adjustable: No, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 75000 h, Service life L90/B10 at 25 °C: 35000 h, Number of switching cycles: 100000Control gear: Output current: 700 mA, EVG - Output ripple current: 0.05 %, EVG - Length: 175.00 mm, EVG - Width: 55.00 mm, EVG - Height: 30.00 mm, Recommended control gear: DR DS-V-26/220-240/700 PL COMPEmergency lighting: Type of emergency light function (EL): Emergency light unit (battery and control device) for decentralized application separately available, Power in emergency operation: 4 W, Luminous flux in emergency operation: 500Certificates & Standards: Standards: CE; CB; ENEC; UKCA; EAC; EPD, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, EPD: LEDV-00075-V01.01-EN, Replaceable light source (EPREL): Not replaceableAdditional product data: BEG eligible: YesPRODUCT DATA SHEET ON ENVIRONMENTAL PROPERTIES AND CHARACTERISTICS: Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled

"Product benefits: Energy savings thanks to high system luminous efficacy: up to 140 lm/W. High colour consistency with SDCM 3. Through-wiring possible. Decentralised emergency lighting possible with the separately available LEDVANCE Emergency Conversion Box. Versions with anti-glare treatment suitable for computer workstations (U19) availableProduct features: Extruded aluminium frame, metal housing. Polystyrene diffuser. Service life (L80/B10): up to 75,000 h (at 25 °C). 3-pole terminal block, cable cross-section up to 3 x 1.5 mm². Protection rating: IP50 (recessed luminaire), IP20 (driver)Technical specifications: Accessories available for various installation options. Safety cable for luminaires included. Safety terminals pre-fitted. External ballast included. Suitable for use with an Emergency Conversion Box. Replacement driver available separatelySafety instructions: All electrical connections must only be carried out by qualified personnel. The flexible external cable of this luminaire cannot be replaced; if the cable is damaged, the luminaire must be disposed of. Caution: risk of electric shock. The luminaires are not intended to be covered with heat-insulating material.Electrical data: Rated power: 26.00 W, Rated voltage: 220–240 V, Mains frequency: 50/60 Hz, Rated current: 120.000 mA, Inrush current: 23 A, Inrush current duration Th50: 95 µs, Max. Number of luminaires per B16 circuit breaker: 25, Max. number of luminaires per C10 A circuit breaker: 21, Max. number of luminaires per C16 circuit breaker: 34, Mains power factor ?: 0.9, Protection class: II, surge voltage resistance (L – N): 1000 V, operating mode: external LED driverPhotometric data: luminous flux: 3640 lm, luminous efficacy: 140 lm/W, colour temperature: 4000 K, light colour (designation): cool white, colour rendering index Ra: > 80, standard deviation of colour matching: < 3 sdcm, low flicker: Yes, Flicker measurement parameter (Pst LM): <1, Measurement parameter for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Photobiological risk group according to EN62471: RG0, Beam angle: 110°Dimensions & weight: Length: 620.00 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 1600.00 gMaterials & colours: Product colour: White, Housing colour: White, RAL number: RAL 9003, Housing material: Aluminium, Cover material: Polystyrene (PS), Material of the light-emitting surface: polystyrene, Glow wire test in accordance with IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+45 °C, Storage temperature range: -20…+70 °C, Connection type: Screwless terminal block, Protection rating: IP50/IP20, Impact resistance class (IK): IK02, Dimmable: No, Mounting type: Recessed/Suspended/Surface-mounted, Mounting location: Ceiling, Application environment: Indoor applications, Recessed length: 600 mm, Recessed width: 600 mm, Recessed depth: 50 mm, Mechanically adjustable: No, Includes light source: Yes, Replaceable light source unit: NoLifespan: L70/B50 lifespan at 25 °C: 100,000 h, L80/B10 lifespan at 25 °C: 75,000 h, Service life L90/B10 at 25 °C: 35,000 h, Number of switching cycles: 100,000Ballast: Output current: 700 mA, ECG – output ripple current: 0.05 per cent, ECG – length: 175.00 mm, ECG – width: 55.00 mm, ECG – height: 30.00 mm, Recommended ballast: DR DS-V-26/220-240/700 PL COMPEmergency lighting: Type of emergency lighting function (EL): Emergency lighting unit (battery and control unit) for decentralised use available separately, Power in emergency mode: 4 W, Luminous flux in emergency mode: 500Certificates & Standards: Standards: CE; CB; ENEC; UKCA; EAC; EPD, luminaire with limited surface temperature, D-mark: No, impact-resistant: No, EPD: LEDV-00075-V01.01-EN, replaceable light source (EPREL): Not replaceableAdditional product data: Eligible for BEG funding: YesPRODUCT DATA SHEET ON ENVIRONMENTAL PROPERTIES AND CHARACTERISTICS: Minimum proportion of recycled material in the packaging: 80 per cent, Minimum proportion of recycled material