"Product advantages: Demand-optimized lighting thanks to flexible, programmable sensor. Easy adjustment of sensor range, daylight detection, light duration and dimming function. Continuous operation possible, activation by means of special switching scheme. Very versatile due to selectable CCT and power levels (Multi Select) thanks to a switch on the back. Robust cable gland with integrated Waterstop function. Climate membrane for optimized air exchange, with constantly high IP protection class. Light output, robust and durable. Energy saving of up to 90% compared to halogen floodlights. No light emission in the upper hemisphere (ULOR 0%) at 0° inclinationProduct properties: Flexible motion and daylight sensor. High luminous efficacy: up to 150 lm/W. Degree of protection: IP65. Pre-installed, flexible cable (H05RN-F) with 1 m length, 3 x 1.0 mm² crimped. Reflector-based, symmetrical light distribution with 100° x 100° beam angle. Mounting bracket with 30° angle and large rotation range. Integrated voltage driver, suitable for 220 - 240 V ACSafety instructions: Max. Wind load area 18 W = 0.010 m² / 42 W = 0.018 m² / 70 W = 0.033 m² / 105 W = 0.044 m² / 135 W = 0.060 m² / 178 W = 0.074 m². All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The flexible outdoor cable of this light fitting cannot be replaced; if the cable is damaged, the light fitting must be disposed of. Connection terminal not included in the scope of delivery. The installation must only be carried out by qualified personnel. To reduce the risk of strangulation, the flexible supply line connected to the light fitting, if it is within arm's reach, must be mounted directly and firmly to the wall. Product of protection class I. All electrically conductive, metallic housing parts that can pick up voltage during operation or in the event of a fault during maintenance must be continuously connected to the protective conductor.Electrical data: Rated power: 18 W / 9 W, Rated voltage: 220…240 V, Mains frequency: 50…60 Hz, Rated current: 91mA / 60 mA, Inrush current: 7.8 A, Inrush current duration Th50: 24 µs, Max. Number of light fittings circuit breaker B16: 96, Max. No. of light fittings on circuit breaker C10 A: 76, Max. Number of light fittings circuit breaker C16: 123, Power factor ?: > 0.8, Harmonic content: ? 20 %, Protection class: I, Surge voltage resistance (L – N): 2 kV, Surge voltage resistance (L/N – Earth): 4 kV, Operating mode: Integrated LED driverPhotometric data: Luminous flux: 2400 lm / 1350 lm, Luminous efficacy: 135 lm/W / 150 lm/W, Correlated color temperature: 3000 K / 4000 K / 6500 K, Reference setting of the included light source (Kelvin): 4000 K, Light color (designation): Warm white; Cool white; Daylight, Color rendering index Ra: > 80, Standard deviation of color matching: ?5 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <0.25, Measurement value for stroboscopic effects (SVM): <1.6, Photobiological risk group according to EN62778: RG1, Radiation angle: 100 ° x 100 °Adjustable properties: Adjustable properties: Array; Array; Array; Array; Array; ArrayDimensions & Weight: Length: 126.00 mm, Height: 57.00 mm, Width: 168.00 mm, Product weight: 385.00 g, Cable length: 1000 mmMaterials & Colors: Product color: Black, Housing color: Black, RAL number: RAL 9017, Housing material: Aluminum, Cover material: Glass, Material of the light-emitting surface: Embossed glass, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -30…+45 °C, Storage temperature range: -40…+80 °C, Connection type: Cable, 3-pole, Degree of protection: IP65, Protection class IK (impact resistance grade): IK06, Corrosion resistance class according to EN 12944: C4 Medium, Dimmable: No, Type of mounting: Surface-mounted, Installation location: Wall; Floor; Ceiling, Application environment: Outdoor applications, Installation height: ?5 m, Mec

"Product advantages: Demand-optimized lighting thanks to flexible, programmable sensor. Easy adjustment of sensor range, daylight detection, light duration and dimming function. Continuous operation possible, activation by means of a special switching scheme. Very versatile due to selectable CCT and power levels (Multi Select) thanks to a switch on the back. Robust cable gland with integrated Waterstop function. Climate membrane for optimized air exchange, with constantly high IP protection class. Light output, robust and durable. Energy savings of up to 90% compared to halogen floodlights. No light emission in the upper hemisphere (ULOR 0%) at 0° inclinationProduct properties: Flexible motion and daylight sensor. High luminous efficacy: up to 150 lm/W. Degree of protection: IP65. Pre-installed, flexible cable (H05RN-F) with 1 m length, 3 x 1.0 mm² crimped. Reflector-based, symmetrical light distribution with 100° x 100° beam angle. Mounting bracket with 30° angle and large rotation range. Integrated voltage driver, suitable for 220 - 240 V ACSafety instructions: Max. Wind load area 18 W = 0.010 m² / 42 W = 0.018 m² / 70 W = 0.033 m² / 105 W = 0.044 m² / 135 W = 0.060 m² / 178 W = 0.074 m². All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The flexible outdoor cable of this light fitting cannot be replaced; if the cable is damaged, the light fitting must be disposed of. Connection terminal not included in the scope of delivery. The installation must only be carried out by qualified personnel. To reduce the risk of strangulation, the flexible supply line connected to the light fitting, if it is within arm's reach, must be mounted directly and firmly to the wall. Product of protection class I. All electrically conductive, metallic housing parts that can pick up voltage during operation or in the event of a fault during maintenance must be continuously connected to the protective conductor.Electrical data: Rated power: 42 W / 24 W, Rated voltage: 220…240 V, Mains frequency: 50…60 Hz, Rated current: 203mA / 116 mA, Inrush current: 28.6 A, Inrush current duration Th50: 2 µs, Max. Number of light fittings circuit breaker B16: 26, Max. Number of light fittings on fuse switch C10 A: 20, Max. Number of light fittings circuit breaker C16: 33, Power factor ?: > 0.9, Harmonic content: ? 10 %, Protection class: I, Surge voltage resistance (L – N): 2 kV, Surge voltage resistance (L/N – Earth): 4 kV, Operating mode: Integrated LED driverPhotometric data: Luminous flux: 6100 lm / 3600 lm, Luminous efficacy: 145 lm/W / 150 lm/W, Color temperature: 3000 K / 4000 K / 6500 K, Reference setting of the included light source (Kelvin): 4000 K, Light color (designation): Warm white; Cold white; Cold daylight, Color rendering index Ra: > 80, Standard deviation of color matching: ?5 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <0.1, Measurement value for stroboscopic effects (SVM): <1.2, Photobiological risk group according to EN62778: RG1, Radiation angle: 100 ° x 100 °Adjustable properties: Adjustable properties: Array; Array; Array; Array; Array; ArrayDimensions & Weight: Length: 163.00 mm, Height: 57.00 mm, Width: 197.00 mm, Product weight: 560.00 g, Cable length: 1000 mmMaterials & Colors: Product color: Black, Housing color: Black, RAL number: RAL 9017, Housing material: Aluminum, Cover material: Glass, Material of the light-emitting surface: Embossed glass, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -30…+45 °C, Storage temperature range: -40…+80 °C, Connection type: Cable, 3-pole, Degree of protection: IP65, Protection class IK (Impact resistance grade): IK06, Corrosion resistance class according to EN 12944: C4 Medium, Dimmable: No, Type of mounting: Surface-mounted, Installation location: Wall; Floor; Ceiling, Application environment: Outdoor applications, Installation height: ?5 m, Mec