Surface-mounted light fitting for individual or light band applications. Product features: Each LED with individual lens and reflector for UGR < 16 and homogeneous light distribution. Suspended mounting with suspension set. Connectable into a seamless light band using a mechanical connector (for surface-mounted or suspended mounting). Versions with length 1200 or 1500 mm available. Luminous flux up to 5700 lm. Luminous efficacy: up to 125 lm/W. Initial color consistency: 3 SDCM (threshold unit). Glow wire test according to IEC 60695-2-12: 850 °C. Versions with CRI 90 available. Light fitting versions with IoT-capable DALI-2 driver or Zigbee 3.0 technology available. Service life (L70/B50): 60,000 h (at 25 °C). Product advantages: Homogeneous light distribution and reduced glare thanks to the IndiviLED® optics. Various mounting options. The product family offers comprehensive solutions for a wide range of applications. Up to 50 % energy saving compared to T5 light bars. Further variants with DALI control gear, emergency lighting function according to IEC 60598-2-22 or through-wiring additionally available. Robust housing with IK06. Flicker-free light thanks to special electronic control gear. Areas of application: Direct replacement for light fittings with fluorescent lamps. Offices, schools. General indoor lighting. Corridors, entrance areas. Seamless light bands. Shop lighting. Technical equipment: Ceiling junction box available. Suspension set available. Mechanical connector available. Through-wiring set available.Suitable for wall mounting: No, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Suitable for VDU workstations according to EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Socket: other, Material of the housing: aluminium, Housing colour: white, Design of the grid: matt, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 190mA, Control gear: Control gear, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming GPRS: No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Dimming depending on the control gear: No, Without dimming function: Yes, Light distributor: Focus lens, Radiation angle: wide-beam 41-80°, Colour consistency (McAdam ellipse): SDCM3, Light exit: direct, Rated service life L70/B50 at 25 °C: 60000h, Rated service life L80/B10 at 25 °C: 50000h, Rated service life L90/B10 at 25 °C: 35000h, Max. Number of light fittings circuit breaker B16: 30, Max. Number of light fittings circuit breaker C16: 38, Degree of protection (IP): IP20, Impact resistance: IK06, Protection class: I, Rated ambient temperature according to IEC62722-2-1: -20-+45°C, Suitable for emergency lighting: No, Emergency power supply integrated: No, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 34.00W, Light fitting luminous efficacy: 110lm/W, Rated luminous flux according to IEC 62722-2-1: 3800lm, Light colour: white, Colour temperature: 3000K, Colour rendering index CRI: 80-89, Width: 120.00mm, Height/Depth: 40.00mm, Length: 1199.00mm, Type of wiring: suitable for through-wiring, Number of poles: 2, Type of connection: Terminal block, Photobiological safety according to EN 62471: RG1, Colour temperature adjustable: no, Luminous flux adjustable: no, Radiation angle adjustable: no, Operation via Bluetooth: No, Compatible with Apple HomeKit: Yes, Compatible

Surface-mounted light fitting for individual or light band applications. Product features: Each LED with individual lens and reflector for UGR < 16 and homogeneous light distribution. Suspended mounting with suspension set. Connectable into a seamless light band using a mechanical connector (for surface-mounted or suspended mounting). Versions with length 1200 or 1500 mm available. Luminous flux up to 5700 lm. Luminous efficacy: up to 125 lm/W. Initial color consistency: 3 SDCM (threshold unit). Glow wire test according to IEC 60695-2-12: 850 °C. Versions with CRI 90 available. Light fitting versions with IoT-capable DALI-2 driver or Zigbee 3.0 technology available. Service life (L70/B50): 60,000 h (at 25 °C). Product advantages: Homogeneous light distribution and reduced glare thanks to the IndiviLED® optics. Various mounting options. The product family offers comprehensive solutions for a wide range of applications. Up to 50 % energy saving compared to T5 light bars. Further variants with DALI control gear, emergency lighting function according to IEC 60598-2-22 or through-wiring additionally available. Robust housing with IK06. Flicker-free light thanks to special electronic control gear. Areas of application: Direct replacement for light fittings with fluorescent lamps. Offices, schools. General indoor lighting. Corridors, entrance areas. Seamless light bands. Shop lighting. Technical equipment: Ceiling junction box available. Suspension set available. Mechanical connector available. Through-wiring set available. Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. Class I product. All electrically conductive, metallic housing parts that can pick up voltage during operation or in the event of a fault during maintenance must be continuously connected to the protective conductor.Wall mounting: No, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Suitable for VDU workstations according to EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Housing material: Aluminium, Housing color: white, Design of the grid: matt, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 140mA, Control gear: Control gear, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Focus lens, Color consistency (McAdam ellipse): SDCM3, Light exit: direct, Rated service life L70/B50 at 25 °C: 60000h, Max. Number of light fittings circuit breaker B16: 37, Max. Number of light fittings circuit breaker C16: 48, Degree of protection (IP): IP20, Impact resistance: IK06, Protection class: I, Light fitting with limited surface temperature D-mark: No, Rated ambient temperature according to IEC62722-2-1: -20-45°C, Suitable for emergency lighting: No, Integrated emergency power supply: No, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slots: No, Max. System power: 25.00W, Light fitting luminous efficacy: 125lm/W, Rated luminous flux according to IEC 62722-2-1: 3100lm, Light color: white, Color temperature: 3000K, Color rendering index CRI: 80-89, Power factor: 0.90, Width: 120.00mm, Height/Depth: 40.00mm, Length: 1488.00mm, Type of wiring: suitable for through-wiring, Number of poles: 2, Type of connection: Terminal block,

Surface-mounted light fitting for individual or light band applications. Product features: Each LED with individual lens and reflector for UGR < 16 and homogeneous light distribution. Suspended mounting with suspension set. Connectable into a seamless light band using a mechanical connector (for surface-mounted or suspended mounting). Versions with length 1200 or 1500 mm available. Luminous flux up to 5700 lm. Luminary efficacy: up to 125 lm/W. Initial color consistency: 3 SDCM (threshold unit). Glow wire test according to IEC 60695-2-12: 850 °C. Versions with CRI 90 available. Light fitting versions with IoT-capable DALI-2 driver or Zigbee 3.0 technology available. Service life (L70/B50): 60,000 h (at 25 °C). Product advantages: Homogeneous light distribution and reduced glare thanks to the IndiviLED® optics. Various mounting options. The product family offers comprehensive solutions for a wide range of applications. Up to 50 % energy savings compared to T5 light bars. Further variants with DALI control gear, emergency lighting function according to IEC 60598-2-22 or through-wiring additionally available. Robust housing with IK06. Flicker-free light thanks to special electronic control gear. Areas of application: Direct replacement for light fittings with fluorescent lamps. Offices, schools. General indoor lighting. Corridors, entrance areas. Seamless light bands. Shop lighting. Technical equipment: Ceiling junction box available. Suspension set available. Mechanical connector available. Through-wiring set available. Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. Class I product. All electrically conductive, metallic housing parts that can pick up voltage during operation or in the event of a fault during maintenance must be continuously connected to the protective conductor.Wall mounting: No, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Suitable for VDU workstations according to EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Housing material: Aluminium, Housing color: white, Design of the grid: matt, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 280mA, Control gear: Control gear, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase section: No, Dimming phase cut: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Focus lens, Color consistency (McAdam ellipse): SDCM3, Light exit: direct, Rated service life L70/B50 at 25 °C: 60000h, Max. Number of light fittings circuit breaker B16: 33, Max. Number of light fittings circuit breaker C16: 45, Degree of protection (IP): IP20, Impact resistance: IK06, Protection class: I, Light fitting with limited surface temperature D-mark: No, Rated ambient temperature according to IEC62722-2-1: -20-45°C, Suitable for emergency lighting: No, Integrated emergency power supply: No, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slits: No, Max. System power: 48.00W, Luminary efficacy: 120lm/W, Rated luminous flux according to IEC 62722-2-1: 5700lm, Light color: white, Color temperature: 4000K, Color rendering index CRI: 80-89, Power factor: 0.90, Width: 120.00mm, Height/Depth: 40.00mm, Length: 1488.00mm, Type of wiring: suitable for through-wiring, Number of poles: 2, Type of connection: Terminal block,

Surface-mounted light fitting for individual or light band applications. Product features: Each LED with individual lens and reflector for UGR < 16 and homogeneous light distribution. Suspended mounting with suspension set. Connectable into a seamless light band using a mechanical connector (for surface-mounted or suspended mounting). Versions with length 1200 or 1500 mm available. Luminous flux up to 5700 lm. Luminous efficacy: up to 125 lm/W. Initial color consistency: 3 SDCM (threshold unit). Glow wire test according to IEC 60695-2-12: 850 °C. Versions with CRI 90 available. Light fitting versions with IoT-capable DALI-2 driver or Zigbee 3.0 technology available. Service life (L70/B50): 60,000 h (at 25 °C). Product advantages: Homogeneous light distribution and reduced glare thanks to the IndiviLED® optics. Various mounting options. The product family offers comprehensive solutions for a wide range of applications. Up to 50 % energy saving compared to T5 light bars. Further variants with DALI control gear, emergency lighting function according to IEC 60598-2-22 or through-wiring additionally available. Robust housing with IK06. Flicker-free light thanks to special electronic control gear. Application areas: Direct replacement for light fittings with fluorescent lamps. Offices, schools. General indoor lighting. Corridors, entrance areas. Seamless light bands. Shop lighting. Technical equipment: Ceiling junction box available. Suspension set available. Mechanical connector available. Through-wiring set available. Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. Class I product. All electrically conductive, metallic housing parts that can pick up voltage during operation or in the event of a fault must be continuously connected to the protective conductor.Wall mounting: No, Suitable for pendant suspension: Yes, Suitable for ceiling mounting: Yes, Suitable for recessed mounting: No, Suitable for surface mounting: Yes, Suitable for light band configuration: No, Suitable for VDU workstations according to EN 12464-1: Yes, Lamp: LED non-replaceable, With lamp: Yes, Suitable for number of lamps: 0, Housing material: Aluminium, Housing color: white, Design of the grid: matt, Type of voltage: AC, Rated voltage: 220-240V, Rated current: 280mA, Control gear: Control gear, With control gear: Yes, Replaceable control gear: No, Dimming 0-10 V: No, Dimming 1-10 V: No, Dimming DALI-2: No, Dimming DALI: No, Dimming DMX: No, Dimming DSI: No, Dimming potentiometer (device-integrated): No, Dimming LineSwitch: No, Dimming manufacturer-specific: No, Dimming mains voltage modulation: No, Dimming phase-cut: No, Dimming phase-angle: No, Dimming programmable: No, Dimming RF: No, Dimming Sine Wave Reduction: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming with push-button: No, Without dimming function: Yes, Light distributor: Focus lens, Color consistency (McAdam ellipse): SDCM3, Light exit: direct, Rated service life L70/B50 at 25 °C: 60000h, Max. Number of light fittings circuit breaker B16: 33, Max. Number of light fittings circuit breaker C16: 45, Degree of protection (IP): IP20, Impact resistance: IK06, Protection class: I, Light fitting with limited surface temperature D-mark: No, Rated ambient temperature according to IEC62722-2-1: -20-45°C, Suitable for emergency lighting: No, Integrated emergency power supply: No, With motion detector: No, With light sensor: No, Cover of the light fitting with thermal insulation material possible: No, With air slots: No, Max. System power: 48.00W, Light fitting luminous efficacy: 110lm/W, Rated luminous flux according to IEC 62722-2-1: 5300lm, Light color: white, Color temperature: 3000K, Color rendering index CRI: 80-89, Power factor: 0.90, Width: 120.00mm, Height/Depth: 40.00mm, Length: 1488.00mm, Type of wiring: suitable for through-wiring, Number of poles: 2, Type of connection: Terminal block,