Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Easy and quick installation thanks to a connection box with a 3-pole, tool-less connection terminal. Uniform light with glare reduction thanks to included reflector and diffuser. Very versatile due to selectable power levels (Multi Lumen) via dip switch on the driver. Well suited for retrofitting with an extension ring as separate accessoryProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 3-pole connection terminal included. Options for ceiling frame attachments available. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 15 W / 12 W / 10 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 68mA / 59mA / 50 mA, inrush current: 25.2 A, inrush current duration Th50: 6.8 µs, max. number of light fittings circuit breaker B16: 29, max. number of light fittings on fuse switch C10 A: 23, max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 2025 lm / 1680 lm / 1400 lm, total luminous flux of included light sources: 1800 lm, luminous efficacy: 135 lm/W / 140 lm/W, color temperature: 3000 K, light color (designation): Warm white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 840 lm / 730 lm / 600 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 95 °Dimensions & Weight: Diameter: 160.00 mm, Height: 57.10 mm, Product weight: 315.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminium, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection, 3-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: No, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 150 mm, Installation depth: 57.0 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, service life L80/B10 at 25 °C: 100000 h, service life L90/B10 at 25 °C: 65000 h, number of switching cycles: 100000Control gear: Output current: 350mA / 300mA / 250 mA, Electronic control gear - output ripple current: ? 10 %, Recommended control gear: P0-PB18ML-4035Emergency lighting: Type of emergency operation test: none, power in emergency operation: 3 W, luminous flux in emergency operation: 375 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Product note:

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Easy and quick installation thanks to a connection box with a 3-pole, tool-less connection terminal. Uniform light with glare reduction thanks to included reflector and diffuser. Very versatile due to selectable power levels (Multi Lumen) via dip switch on the driver. Well suited for retrofitting with an extension ring as separate accessoryProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminum lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 3-pole connection terminal included. Options for ceiling frame attachments available. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 15 W / 12 W / 10 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 68mA / 59mA / 50 mA, inrush current: 25.2 A, inrush current duration Th50: 6.8 µs, max. number of light fittings circuit breaker B16: 29, max. number of light fittings on fuse switch C10 A: 23, max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 2175 lm / 1800 lm / 1500 lm, total luminous flux of included light sources: 1900 lm, luminous efficacy: 145 lm/W / 150 lm/W, color temperature: 4000 K, light color (designation): Cool white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 900 lm / 800 lm / 650 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 95 °Dimensions & Weight: Diameter: 160.00 mm, Height: 57.10 mm, Product weight: 315.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-less connection, 3-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: No, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 150 mm, Installation depth: 57.0 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, service life L80/B10 at 25 °C: 100000 h, service life L90/B10 at 25 °C: 65000 h, number of switching cycles: 100000Control gear: Output current: 350mA / 300mA / 250 mA, EEK - output ripple current: ? 10 %, Recommended control gear: P0-PB18ML-4035Emergency lighting: Type of emergency operation test: none, power in emergency operation: 3 W, luminous flux in emergency operation: 390 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Product note:

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Easy and quick installation thanks to a connection box with a 3-pole, tool-less connection terminal. Uniform light with glare reduction thanks to included reflector and diffuser. Very versatile due to selectable power levels (Multi Lumen) via dip switch on the driver. Well suited for retrofitting with an extension ring as separate accessoryProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminum lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 3-pole connection terminal included. Options for ceiling frame attachments available. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with thermally insulating material.Electrical data: Rated power: 25 W / 20 W / 15 W, Rated voltage: 220…240 V, Mains frequency: 50…60 Hz, Rated current: 113mA / 88mA / 75 mA, Inrush current: 25.2 A, Inrush current duration Th50: 90 µs, Max. Number of light fittings circuit breaker B16: 29, Max. No. of light fittings on fuse switch C10 A: 23, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: ? 0.90, Harmonic content: ? 20 %, Protection class: II, Surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 3625 lm / 2900 lm / 2250 lm, Total luminous flux of included light sources: 3200 lm, Light output: 145 lm/W / 150 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Luminous intensity: 1420 lm / 1180 lm / 920 lm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): <0.4, Photobiological risk group according to EN62778: RG1, Photobiological risk group according to EN62471: RG1, Radiation angle: 100 °Dimensions & Weight: Diameter: 215.00 mm, Height: 58.80 mm, Product weight: 520.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection, 3-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: No, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 200 mm, Installation depth: 59 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 64000 h, Number of switching cycles: 100000Control gear: Output current: 600mA / 500mA / 380 mA, Electronic control gear - output ripple current: ? 10 %, Recommended control gear: P0-PB42ML-4060Emergency lighting: Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 390 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Product note

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Easy and quick installation thanks to a connection box with a 3-pole, tool-less connection terminal. Uniform light with glare reduction thanks to included reflector and diffuser. Very versatile due to selectable power levels (Multi Lumen) via dip switch on the driver. Well suited for retrofitting with an extension ring as separate accessoryProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminum lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 3-pole connection terminal included. Options for ceiling frame attachments available. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 25 W / 20 W / 15 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 113mA / 88mA / 75 mA, inrush current: 25.2 A, inrush current duration Th50: 90 µs, max. number of light fittings circuit breaker B16: 29, max. number of light fittings on fuse switch C10 A: 23, max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 3750 lm / 3100 lm / 2325 lm, total luminous flux of included light sources: 3200 lm, light output: 150 lm/W / 155 lm/W, color temperature: 4000 K, light color (designation): Cool white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 1500 lm / 1250 lm / 970 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 100 °Dimensions & Weight: Diameter: 215.00 mm, Height: 58.80 mm, Product weight: 520.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection, 3-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: No, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 200 mm, Installation depth: 59 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 64000 h, Number of switching cycles: 100000Control gear: Output current: 600mA / 500mA / 380 mA, Electronic control gear - output ripple current: ? 10 %, Recommended control gear: P0-PB42ML-4060Emergency lighting: Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 400 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Product note

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Easy and quick installation thanks to a connection box with a 3-pole, tool-less connection terminal. Uniform light with glare reduction thanks to included reflector and diffuser. Very versatile due to selectable power levels (Multi Lumen) via dip switch on the driver. Well suited for retrofitting with an extension ring as separate accessoryProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminum lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 3-pole connection terminal included. Options for ceiling frame attachments available. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 36 W / 30 W / 25 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 160mA / 136mA / 115 mA, inrush current: 25.2 A, inrush current duration Th50: 90 µs, max. number of light fittings circuit breaker B16: 29, max. number of light fittings on fuse switch C10 A: 23, max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 5220 lm / 4350 lm / 3750 lm, total luminous flux of included light sources: 4600 lm, luminous efficacy: 145 lm/W / 150 lm/W, color temperature: 3000 K, light color (designation): Warm white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 2030 lm / 1750 lm / 1500 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 100 °Dimensions & Weight: Diameter: 265.00 mm, Height: 60.30 mm, Product weight: 705.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection, 3-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: No, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 250 mm, Installation depth: 60 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 61000 h, Number of switching cycles: 100000Control gear: Output current: 900mA / 750mA / 650 mA, EVG - output ripple current: ? 10 %, Recommended control gear: P0-PB42ML-4090Emergency lighting: Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 395 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Note on the prod

Product benefits: Energy savings thanks to high system luminous efficacy: up to 155 lm/W. Through-wiring is possible via the connection box supplied. High-quality polycarbonate frame to reduce the luminaire’s overall weight. Quick and easy installation thanks to a junction box with a 3-pole, tool-free terminal block. Uniform light with reduced glare thanks to the included reflector and diffuser. Highly versatile thanks to selectable power levels (Multi Lumen) via DIP switches on the driver. Well suited for retrofitting with an extension ring as a separate accessoryProduct features: Service life (L80/B10): up to 100,000 hours (at 25 °C). Consistent light colour: ≤ 3 SDCM (standard deviation colour metre). External driver with Multi Lumen function up to 5,580 lm. Aluminium luminaire with three different cut-outs and an opal diffuser. Very homogeneous light distributionTechnical specifications: Safety cable for luminaires included. External ballast included. Connection box with 3-pole terminal block included. Options for ceiling frame attachments are available. Grey and black interchangeable rings available as separate accessories. Extension rings available as separate accessories. Extension ring D190 for retrofitting the D150 luminaire, extension ring D240 for retrofitting the D200 luminaireSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock. The luminaires are not designed to be covered with heat-insulating material.Electrical data: Rated power: 36 W / 30 W / 25 W, Rated voltage: 220–240 V, Mains frequency: 50–60 Hz, Rated current: 160 mA / 136 mA / 115 mA, Inrush current: 25.2 A, inrush current duration Th50: 90 µs, max. number of luminaires per B16 circuit breaker: 29, max. number of luminaires per C10 A: 23, maximum number of luminaires per residual current circuit breaker C16: 38, mains power factor?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage withstand (L – N): 1000 VPhotometric data: Luminous flux: 5580 lm / 4650 lm / 4000 lm, Total luminous flux of the light sources contained: 4,750 lm, luminous efficacy: 155 lm/W / 160 lm/W, colour temperature: 4,000 K, light colour (designation): Cool white, Colour rendering index Ra: > 80, Standard deviation of colour matching: 3 sdcm, Luminous intensity: 2200 lm / 1840 lm / 1600 lm, Low flicker: Yes, Flicker measurement parameter (Pst LM): <1, Measurement parameter for stroboscopic effects (SVM): <0.4, Photobiological risk group according to EN 62778: RG1, Photobiological risk group according to EN 62471: RG1, Beam angle: 100°Dimensions & weight: Diameter: 265.00 mm, Height: 60.30 mm, Product weight: 705.00 gMaterials & colours: Product colour: White, Housing colour: White, RAL number: RAL 9003, Housing material: Aluminium, Cover material: Polycarbonate (PC), Glow-wire test in accordance with IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection, 3-pin, Protection rating: IP44/IP20, Impact resistance class (IK): IK03, Dimmable: No, Installation location: Ceiling, Wall, Application environment: Indoor applications, Recess diameter: 250 mm, Recess depth: 60 mm, Supplied with light source: Yes, Replaceable light source unit: NoLifespan: L70/B50 service life at 25 °C: 100,000 h, L80/B10 service life at 25 °C: 100,000 h, L90/B10 service life at 25 °C: 610,000 h, Number of switching cycles: 100,000Ballast: Output current: 900 mA / 750 mA / 650 mA, Ballast output ripple current: ? 10 per cent, Recommended ballast: P0-PB42ML-4090Emergency lighting: Type of emergency operation test: none, Power in emergency mode: 3 W, Luminous flux in emergency mode: 410 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Luminaire with limited surface temperature, D-mark: No, Ball-impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Note on the product

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Uniform light with glare reduction thanks to included reflector and diffuser. Well suited for retrofitting with an extension ring as separate accessory. DALI-2 – certified, incl. Parts 251, 252, 253. Push-DIM application for easy controlProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cut-outs and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 5-pole connection terminal included. Options for ceiling frame attachments are only available for DALI versions D200 and D250. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 15 W / 12 W / 10 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 68mA / 59mA / 50 mA, inrush current: 25.2 A, inrush current duration Th50: 6.8 µs, Max. number of light fittings circuit breaker B16: 29, Max. number of light fittings on fuse switch C10 A: 23, Max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 2025 lm / 1680 lm / 1400 lm, total luminous flux of included light sources: 1800 lm, luminous efficacy: 135 lm/W / 140 lm/W, color temperature: 3000 K, light color (designation): Warm white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 840 lm / 730 lm / 600 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 95 °Dimensions & weight: Diameter: 160.00 mm, height: 57.10 mm, product weight: 380.00 gMaterials & colors: Product color: White, housing color: White, RAL number: RAL 9003, housing material: Aluminium, cover material: Polycarbonate (PC), glow wire test according to IEC 60695-2-12: 650 °C, mercury content of the lamp: 0.0 mgApplication & installation: Ambient temperature range: -20…+40 °C, storage temperature range: -20…+80 °C, connection type: Tool-less connection, 5-pole, degree of protection: IP44/IP20, protection class IK (impact resistance grade): IK03, dimmable: Yes, type of dimming: DALI2, IoT-capable: Supports DALI data according to Part 251, 252, 253, mounting location: Ceiling, wall, application environment: Indoor applications, installation diameter: 150 mm, installation depth: 57.0 mm, with lamp: Yes, replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, service life L80/B10 at 25 °C: 100000 h, service life L90/B10 at 25 °C: 65000 h, number of switching cycles: 100000Control gear: Output current: 350mA / 300mA / 250 mA, EVG - output ripple current: ? 10 %, recommended control gear: DR DALI-P-30/220-240/700Emergency lighting: Type of emergency operation test: none, power in emergency operation: 3 W, luminous flux in emergency operation: 375 lmCertificates & standards: Standards: ENEC, CE, EAC, CB, UKCA, light fitting with limited surface temperature D-mark: No, ball impact resistant: No, replaceable light source (EPREL): Not replaceableAdditional product

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Uniform light with glare reduction thanks to included reflector and diffuser. Well suited for retrofitting with an extension ring as separate accessory. DALI-2 – certified, incl. Parts 251, 252, 253. Push-DIM application for easy controlProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cut-outs and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 5-pole connection terminal included. Options for ceiling frame attachments are only available for DALI versions D200 and D250. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 15 W / 12 W / 10 W, Rated voltage: 220…240 V, Mains frequency: 50…60 Hz, Rated current: 68mA / 59mA / 50 mA, Inrush current: 25.2 A, Inrush current duration Th50: 6.8 µs, Max. Number of light fittings circuit breaker B16: 29, Max. No. of light fittings on fuse switch C10 A: 23, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: ? 0.90, Harmonic content: ? 20 %, Protection class: II, Surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 2175 lm / 1800 lm / 1500 lm, Total luminous flux of included light sources: 1900 lm, Light output: 145 lm/W / 150 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Luminous intensity: 900 lm / 800 lm / 650 lm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): <0.4, Photobiological risk group according to EN62778: RG1, Photobiological risk group according to EN62471: RG1, Radiation angle: 95 °Dimensions & Weight: Diameter: 160.00 mm, Height: 57.10 mm, Product weight: 380.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminium, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection, 5-pole, Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: DALI2, IoT-capable: Supports DALI data according to Part 251, 252, 253, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 150 mm, Installation depth: 57.0 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 65000 h, Number of switching cycles: 100000Control gear: Output current: 350mA / 300mA / 250 mA, EVG - Output ripple current: ? 10 %, Recommended control gear: DR DALI-P-30/220-240/700Emergency lighting: Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 390 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Uniform light with glare reduction thanks to included reflector and diffuser. Well suited for retrofitting with an extension ring as separate accessory. DALI-2 – certified, incl. Parts 251, 252, 253. Push-DIM application for easy controlProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 5-pole connection terminal included. Options for ceiling frame attachments are only available for DALI versions D200 and D250. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 25 W / 20 W / 15 W, Rated voltage: 220…240 V, Mains frequency: 50…60 Hz, Rated current: 113mA / 88mA / 75 mA, Inrush current: 25.2 A, Inrush current duration Th50: 90 µs, Max. Number of light fittings circuit breaker B16: 29, Max. No. of light fittings on fuse switch C10 A: 23, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: ? 0,90, Harmonic content: ? 20 %, Protection class: II, Surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 3625 lm / 2900 lm / 2250 lm, Total luminous flux of included light sources: 3200 lm, Light output: 145 lm/W / 150 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Luminous intensity: 1420 lm / 1180 lm / 920 lm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): <0.4, Photobiological risk group according to EN62778: RG1, Photobiological risk group according to EN62471: RG1, Radiation angle: 100 °Dimensions & Weight: Diameter: 215,00 mm, Height: 58,80 mm, Product weight: 555,00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminium, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-less connection, 5-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: DALI2, IoT-capable: Supports DALI data according to Part 251, 252, 253, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 200 mm, Installation depth: 117 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 64000 h, Number of switching cycles: 100000Control gear: Output current: 600mA / 500mA / 400 mA, Electronic control gear - output ripple current: ? 10 %, Recommended control gear: DR DALI-P-30/220-240/700Emergency lighting: Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 390 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring possible via supplied connection box. High-quality polycarbonate frame to reduce the total weight of the light fitting. Uniform light with glare reduction thanks to included reflector and diffuser. Well suited for retrofitting with an extension ring as separate accessory. DALI-2 – certified, incl. Parts 251, 252, 253. Push-DIM application for easy controlProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cut-outs and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 5-pole connection terminal included. Options for ceiling frame attachments are only available for DALI versions D200 and D250. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 25 W / 20 W / 15 W, Rated voltage: 220…240 V, Mains frequency: 50…60 Hz, Rated current: 113mA / 88mA / 75 mA, Inrush current: 25.2 A, Inrush current duration Th50: 90 µs, Max. Number of light fittings circuit breaker B16: 29, Max. No. of light fittings on fuse switch C10 A: 23, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: ? 0.90, Harmonic content: ? 20 %, Protection class: II, Surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 3750 lm / 3100 lm / 2325 lm, Total luminous flux of included light sources: 3200 lm, Light output: 150 lm/W / 155 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Luminous intensity: 1500 lm / 1250 lm / 970 lm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): <0.4, Photobiological risk group according to EN62778: RG1, Photobiological risk group according to EN62471: RG1, Radiation angle: 100 °Dimensions & Weight: Diameter: 215.00 mm, Height: 58.80 mm, Product weight: 555.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminium, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-less connection, 5-pole, Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: DALI2, IoT-capable: Supports DALI data according to Part 251, 252, 253, Installation location: Ceiling, Wall, Application environment: Indoor applications, Installation diameter: 200 mm, Installation depth: 117 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 64000 h, Number of switching cycles: 100000Control gear: Output current: 600mA / 500mA / 400 mA, Electronic control gear - output ripple current: ? 10 %, Recommended control gear: DR DALI-P-30/220-240/700Emergency lighting: Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 400 lmCertificates & Standards: Standards: ENEC, CE, EAC, CB, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional produ

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring via supplied connection box possible. High-quality polycarbonate frame to reduce the total weight of the light fitting. Uniform light with glare reduction thanks to included reflector and diffuser. Well suited for retrofitting with an extension ring as separate accessory. DALI-2 – certified, incl. Parts 251, 252, 253. Push-DIM application for easy controlProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 5-pole connection terminal included. Options for ceiling frame attachments are only available for DALI versions D200 and D250. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 36 W / 30 W / 25 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 160mA / 136mA / 115 mA, inrush current: 25.2 A, inrush current duration Th50: 90 µs, max. number of light fittings circuit breaker B16: 29, max. number of light fittings on fuse switch C10 A: 23, max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 5220 lm / 4350 lm / 3750 lm, total luminous flux of included light sources: 4600 lm, luminous efficacy: 145 lm/W / 150 lm/W, color temperature: 3000 K, light color (designation): Warm white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 2030 lm / 1750 lm / 1500 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 100 °Dimensions & weight: Diameter: 265.00 mm, height: 60.30 mm, product weight: 770.00 gMaterials & colors: Product color: White, housing color: White, RAL number: RAL 9003, housing material: Aluminium, cover material: Polycarbonate (PC), glow wire test according to IEC 60695-2-12: 650 °C, mercury content of the lamp: 0.0 mgApplication & installation: Ambient temperature range: -20…+40 °C, storage temperature range: -20…+80 °C, connection type: Tool-free connection, 5-pole, degree of protection: IP44/IP20, protection class IK (impact resistance grade): IK03, dimmable: Yes, type of dimming: DALI2, IoT-capable: Supports DALI data according to Part 251, 252, 253, mounting location: Ceiling, wall, application environment: Indoor applications, installation diameter: 250 mm, installation depth: 124 mm, with lamp: Yes, replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, service life L80/B10 at 25 °C: 100000 h, service life L90/B10 at 25 °C: 61000 h, number of switching cycles: 100000Control gear: Output current: 900mA / 750mA / 650 mA, EVG - output ripple current: ? 10 %, recommended control gear: DR DALI-P-42/220-240/1050Emergency lighting: Type of emergency operation test: none, power in emergency operation: 3 W, luminous flux in emergency operation: 395 lmCertificates & standards: Standards: ENEC, CE, EAC, CB, UKCA, light fitting with limited surface temperature D-mark: No, ball impact resistant: No, replaceable light source (EPREL): Not replaceableAdditional

Product advantages: Energy saving thanks to high system light output: up to 155 lm/W. Through wiring via supplied connection box possible. High-quality polycarbonate frame to reduce the total weight of the light fitting. Uniform light with glare reduction thanks to included reflector and diffuser. Well suited for retrofitting with an extension ring as separate accessory. DALI-2 – certified, incl. Parts 251, 252, 253. Push-DIM application for easy controlProduct properties: Service life (L80/B10): up to 100,000 h (at 25 °C). Consistent light color: ? 3 SDCM (threshold unit). External driver with Multi Lumen function of up to 5580 lm. Aluminium lighting with three different cutouts and opaque diffuser. Very homogeneous light distributionTechnical equipment: Safety cable for light fitting included. External control gear included. Connection box with 5-pole connection terminal included. Options for ceiling frame attachments are only available for DALI versions D200 and D250. Grey and black interchangeable rings available as separate accessory. Extension rings available as separate accessory. Extension ring D190 for retrofitting the light fitting D150, extension ring D240 for retrofitting the light fitting D200Safety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 36 W / 30 W / 25 W, rated voltage: 220…240 V, mains frequency: 50…60 Hz, rated current: 160mA / 136mA / 115 mA, inrush current: 25.2 A, inrush current duration Th50: 90 µs, Max. number of light fittings circuit breaker B16: 29, Max. number of light fittings on fuse switch C10 A: 23, Max. number of light fittings circuit breaker C16: 38, power factor ?: ? 0.90, harmonic content: ? 20 %, protection class: II, surge voltage resistance (L – N): 1000 VPhotometric data: Luminous flux: 5580 lm / 4650 lm / 4000 lm, total luminous flux of included light sources: 4750 lm, luminous efficacy: 155 lm/W / 160 lm/W, color temperature: 4000 K, light color (designation): Cool white, color rendering index Ra: > 80, standard deviation of color matching: 3 sdcm, luminous intensity: 2200 lm / 1840 lm / 1600 lm, flicker-free: Yes, flicker measurement value (Pst LM): <1, measurement value for stroboscopic effects (SVM): <0.4, photobiological risk group according to EN62778: RG1, photobiological risk group according to EN62471: RG1, radiation angle: 100 °Dimensions & weight: Diameter: 265.00 mm, height: 60.30 mm, product weight: 770.00 gMaterials & colors: Product color: White, housing color: White, RAL number: RAL 9003, housing material: Aluminium, cover material: Polycarbonate (PC), glow wire test according to IEC 60695-2-12: 650 °C, mercury content of the lamp: 0.0 mgApplication & installation: Ambient temperature range: -20…+40 °C, storage temperature range: -20…+80 °C, connection type: Screwless connection, 5-pole, degree of protection: IP44/IP20, protection class IK (impact resistance grade): IK03, dimmable: Yes, type of dimming: DALI2, IoT-capable: Supports DALI data according to Part 251, 252, 253, mounting location: Ceiling, wall, application environment: Indoor applications, installation diameter: 250 mm, installation depth: 124 mm, with lamp: Yes, replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, service life L80/B10 at 25 °C: 100000 h, service life L90/B10 at 25 °C: 61000 h, number of switching cycles: 100000Control gear: Output current: 900mA / 750mA / 650 mA, EVG - output ripple current: ? 10 %, recommended control gear: DR DALI-P-42/220-240/1050Emergency lighting: Type of emergency operation test: none, power in emergency operation: 3 W, luminous flux in emergency operation: 410 lmCertificates & standards: Standards: ENEC, CE, EAC, CB, UKCA, light fitting with limited surface temperature D-mark: No, ball impact resistant: No, replaceable light source (EPREL): Not replaceableAdditional