Zigbee 3.0 Push Button Coupler for integrating standard switches into a wireless light control system. Product features: Push button coupler with wireless Zigbee 3.0 technology. Can be operated with mains voltage or DC voltage. Product advantages: Works together with VIVARES ZB Control & components. Four fully programmable inputs for individual control. Control of rooms, groups, devices and calling up of scenes. Small form factor enables installation in standardised flush-mounted boxes. Quick and easy installation without additional control cables. Areas of application: Offices. Corridors. Classrooms. Training rooms. Stairwells. Sanitary areas.Version: other, Degree of protection (IP): IP20, Operation via Bluetooth: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Width: 43.00mm, Height: 15.00mm, Depth: 15.00mmEAN/GTIN: 4058075463806

Zigbee 3.0 presence sensor for ceiling installation. Product features: Wireless Zigbee 3.0 motion sensor for ceiling installation. Ideal for office applications. Connection to mains voltage 220-240 V. Presence detection via passive IR element. Mounting height: 2.5 m. Product advantages: Works together with VIVARES ZB Control & components. Easy installation of components and no control lines necessary. Areas of application: Offices. Corridors. Classrooms. Training rooms. Stairwells. Sanitary areas.Version: Presence sensor, Degree of protection (IP): IP20, Operation via Bluetooth: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Width: 85.00mm, Height: 64.00mm, Depth: 64.00mmEAN/GTIN: 4058075544222

Zigbee 3.0 control with integrated gateway for medium-sized projects with up to 200 endpoints. Product features: Light control unit based on wireless Zigbee 3.0 technology. IoT ready thanks to integrated gateway. Connect up to 200 endpoints in a network. Integrated Human Centric Lighting control. QR code-based commissioning for all light management components. Remote pre-configuration of rooms, devices & settings possible. Web-based VIVARES portal and mobile commissioning app available. Product advantages: Pre-configuration enables efficient planning & configuration of the entire project remotely. QR code-based enables automatic commissioning of the light management system. Local operation of the system is also possible without an active internet connection. Remote maintenance saves additional working time for changes to the initial installation. Wireless communication prevents rewiring during renovations. VIVARES Cloud Services support monitoring of energy consumption and system maintenance. Save and restore system configuration. Application areas: Room control, floor control, daylight-dependent regulation. Connection of light and presence sensors in ZigBee systems. Conference rooms. Office spaces: individual and group workstations. Suitable for indoor applications. Corridors. Classrooms. VIVARES portal is available on iOS & Android devices as well as PC.Degree of protection (IP): IP20, Operation via Bluetooth: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Width: 90.00mm, Height: 26.00mm, Depth: 26.00mmEAN/GTIN: 4058075427488

"Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Zigbee 3.0 and Zigbee Direct via Bluetooth Low Energy (BLE). Individual current setting on the device with NFC in 1 mA steps. Consumption and diagnostic data via Zigbee. Low flicker enables high light quality as well as good visual comfort. High-quality dimming from 1…100 %. Flexible mounting patterns for easy installation. Suitable for use in dusty and humid environments thanks to high degree of protection. Suitable for use in public areas thanks to high IK rating. Separate decorative element for an aesthetic and functional design availableProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for emergency lighting according to EN 60598-2-2 with adjustable emergency light factor (EOFI) via NFC. Quick and easy current setting via NFC. UV-stabilized polycarbonate (PC) housing, PC diffuser. Impact resistance: IK10. Degree of protection: IP65. Plug terminal for tool-free connection. Loop-through wiring possibleTechnical equipment: Additional cover rings in various designs available. Includes mounting screws and plugs. Anti-theft screw includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Electrical data: Rated power: 17.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 69.000 mA, Inrush current: 14 A, Inrush current duration Th50: 40.4 µs, Max. number of light fittings circuit breaker B16: 53, Max. number of light fittings circuit breaker C10 A: 42, Max. number of light fittings circuit breaker C16: 68, Power factor ?: > 0.90, Harmonic content: < 25 %, Protection class: II, Operating mode: Integrated LED driverPhotometric data: Luminous flux: 2080 lm, Luminous efficacy: 134 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: < 5 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): <0.4, Photobiological risk group according to EN62778: RG0, Photobiological risk group according to EN62471: RG0, Radiation angle: 120 °Dimensions & Weight: Diameter: 312.00 mm, Height: 73.00 mm, Product weight: 997.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Polycarbonate (PC), Cover material: Polycarbonate (PC), Material of the light-emitting surface: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 850 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-less connection terminal, Degree of protection: IP65, Protection class IK (impact resistance grade): IK10, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Surface-mounted, Mounting location: Ceiling; Wall, Application environment: Outdoor applications, Mechanically adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 92000 h, Service life L90/B10 at 25 °C: 46000 h, Number of switching cycles: 60000Control gear: Output current: 370 mA, ELV - Output ripple current: < 5 %, Recommended control gear: DR ZIGBEE NF P 30W 220-240V 0A7Emergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 2.5 W, Luminous flux in emergency operation: 320 lmCertificates & Standards: Standards: CE; UKCA; EAC, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Only by an expertAdditional product data"

Zigbee 3.0 light and presence sensor for ceiling installation. Product features: Wireless Zigbee 3.0 light and motion sensor for ceiling installation. Ideal for office applications. Presence detection via passive IR element. Connection to mains voltage 220-240 V. Mounting height: 2.5 m. Product advantages: Works together with VIVARES ZB Control & components. Easy installation of components and no control lines required. Areas of application: Offices. Corridors. Classrooms. Training rooms. Stairwells. Sanitary areas.Version: Light sensor, Protection class (IP): IP20, Operation via Bluetooth: No, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: Yes, Width: 85.00mm, Height: 64.00mm, Depth: 64.00mmEAN/GTIN: 4058075446182

Control unit for BIOLUX Human Centric Lighting (HCL) compatible products, tool-free mounting, Zigbee 3.0. Product features: High-quality product designed by LEDVANCE. 6 pre-programmed light scenes intuitively selectable: RELAX, CREATE, NATURAL, FOCUS, BOOST and ON/OFF. Selected light scene is displayed in the control unit display. Scheduling function in the BIOLUX app for individual date and time settings of the 6 light scenes for automated operation. Switching the light on and off via control unit and/or optional VIVARES motion sensor. BIOLUX app with installation instructions and FAQ information for quick help during installation. Mounting in standard junction boxes also used for light switches and sockets. Product advantages: Easy and quick installation of the BIOLUX HCL lighting system (BIOLUX HCL CONTROL UNIT in conjunction with BIOLUX HCL light fitting(s) / BIOLUX HCL LED strips / VIVARES motion sensor) thanks to wireless Zigbee 3.0 technology. Automated commissioning and setup via the LEDVANCE BIOLUX app, no programming, registration or cloud required. Intuitive control of the BIOLUX HCL light fittings / BIOLUX HCL LED strips via the control unit. Easy selection of the appropriate light scenes for different work situations. Orientation light in the control unit when the light fittings are switched off. 5 years BIOLUX HCL system warranty when operated in a BIOLUX HCL system (BIOLUX HCL CONTROL UNIT in conjunction with BIOLUX HCL light fitting(s) / BIOLUX HCL LED strips / VIVARES motion sensor). Areas of application: Lighting solution for up to 48 BIOLUX HCL products (light fittings / LED strips / VIVARES motion sensor). Meeting and conference rooms. Hotel and office rooms with little daylight. Nursing homes. Hospitals. Technical equipment: LEDVANCE BIOLUX app for commissioning (start-up) and for the additional functions schedule / sensor setting / NATURAL function test required (available for Android and iOS). Legal notice: The use of the LEDVANCE BIOLUX app is subject exclusively to the LEDVANCE BIOLUX app terms of use, which are displayed upon installation of the app and are available in the app. Safety instructions: Important operating note and disclaimer: This product is exclusively intended for operation in a BIOLUX HCL system (BIOLUX HCL CONTROL UNIT in conjunction with BIOLUX HCL light fitting(s), LED strips and VIVARES motion sensor including integrated or supplied firmware/software). LEDVANCE GmbH assumes no responsibility, liability, warranty or guarantee for the operation of the product in combination or connection with third-party products or other products that are not BIOLUX HCL system products. Important operating note: The BIOLUX HCL CONTROL UNIT may be rotated a total of - all operating procedures combined - a maximum of 7,200° (equivalent to 20 full 360° rotations) per day clockwise or counterclockwise.Degree of protection (IP): IP20, Type of power supply: AC, Operation via Bluetooth: No, IFTTT support available: Yes, Height: 54.00mm, Depth: 54.00mm, Diameter: 84.00mmEAN/GTIN: 4058075724624

Product advantages: Easy and intuitive operation. Manual dimming, switching and saving of light settings. Combined RGB and TW controls possible. Individual adjustment of brightness level and color temperature. Replaceable front cover compatible with ABB, GIRA, JUNG, SCHNEIDER, BERKER, SIEMENS. Behavior after power failure adjustable. Low-maintenance due to mains operation. Optional frame for surface mounting available. Works without gateway in Direct Easy or with Vivares ZigbeeProduct properties: Zigbee 3.0 certified control device for installation in standard flush-mounted boxes. Rotary knob for manual light control. Tunable White, RGB, RGB plus TW (Plug & Play modes), adjustable on the device. Direct commissioning via Bluetooth possible. Compatible with Zigbee 3.0 controls. Up to 40 Zigbee light pointsTechnical equipment: Surface mounting frame for wall mounting without flush-mounted boxSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Electrical data: Rated power: 3.12 W, Rated voltage: 100…240 V, Rated current: 13 mA, Mains frequency: 50…60 HzPhotometric data: Color temperature: RGB / Tunable WhiteDimensions & Weight: Length: 80.00 mm, Width: 80.00 mm, Height: 53.00 mm, Cross-section of input cable: 0.5…1.5 mm², Stripping length input side: 6…7 mm, Product weight: 122.00 gColors & Materials: Product color: White, Housing material: Polycarbonate (PC)Temperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Operating temperature range: -25…+50 °CService Life: Number of switching cycles: 50000Additional product data: Commissioning app: DIRECT EASY, VIVARES, Additional function: VIVARESApplication possibilities: Dimmable: No, DIM interface: Zigbee Direct, Dimming range: 1…100 %, Type of installation: Integrated in flush-mounted boxCertificates & Standards: Standards: CE, ROHS, REACH, Protection class: II, Degree of protection: IP20LOGISTIC DATA: Storage temperature range: -40…+85 °CPRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES: Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled material in the product: 0 %, Recyclability of the product: Largely recyclable product, Recyclability of the packaging: Largely recyclable packaging, List of hazardous substances contained in the product in concentrations greater than 0.1 % by mass: No, Contains substances of very high concern in concentrations of more than 0.1 % by mass: Yes, List of substances of very high concern in concentrations of more than 0.1 % by mass: Lead (7439-92-1)EAN/GTIN: 4099854476334

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring possible with included junction box. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole connection terminal included. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Separate DC-Twistlock cable extension availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 155.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on fuse switch C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 4320 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 1195.0 mm, Height: 11.00 mm, Width: 295.00 mm, Product weight: 3000.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screw-less connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 1185 mm, Installation width: 285 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, Electronic control gear - Output ripple current: 3.0 %, Electronic control gear - Length: 119.0 mm, Electronic control gear - Width: 45 mm, Electronic control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications on cent

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring possible with included junction box. Energy saving thanks to high system light output: up to 130 lm/W. Good anti-glare (UGR < 19). High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole connection terminal included. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Separate DC-Twistlock cable extension availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 155.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on fuse switch C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 4320 lm, Light output: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 1195.0 mm, Height: 11.00 mm, Width: 295.00 mm, Product weight: 3000.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screw-less connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 1185 mm, Installation width: 285 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, Electronic control gear - output ripple current: 3.0 %, Electronic control gear - length: 119.0 mm, Electronic control gear - width: 45 mm, Electronic control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz /

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button terminal block. Through-wiring with included junction box possible. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 28.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 130.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 620 mA, Electronic control gear - output ripple current: 3.0 %, Electronic control gear - length: 119.0 mm, Electronic control gear - width: 45 mm, Electronic control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 5 W, Light st

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button terminal block. Through-wiring possible with included junction box. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. Good glare control (UGR < 19). High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Versions with CRI 90 available. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 28.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 130.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Mounting location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 620 mA, Electronic control gear - Output ripple current: 3.0 %, Electronic control gear - Length: 119.0 mm, Electronic control gear - Width: 45 mm, Electronic control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. High lumen output of up to 5220 lm. Energy saving thanks to high system light output: up to 160 lm/W. High color consistency with SDCM 3. Good anti-glare (UGR < 19). External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Tool-free electrical connection thanks to push-button terminal block. Loop-through wiring possible with included junction box. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versionsProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Service life (L80/B10): 100,000 h (at 25 °C), (L90/B10): 50,000 h (at 25 °C). 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Frame made of extruded aluminum, metal housing. Polystyrene diffuserTechnical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear included. Serviceable light fitting: Upgrades and spare parts availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 32.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 150.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Surge voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 5160 lm, Light output: 155 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 2050.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 620 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 59000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, SMPS - Output ripple current: 3.0 %, SMPS - Length: 119.0 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Suitable for applications where a higher degree of protection is required. High luminous flux of up to 5040 lm. Tool-free electrical connection thanks to push-button terminal block. Through-wiring with included junction box possible. Energy saving thanks to high system luminous efficacy: up to 140 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Easy cleaning of the front side thanks to the smooth PMMA diffuserProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Degree of protection: IP54 (front side), IP20 (back side). Steel sheet housing with recess on the back for the driver to enable a total height of 34 mm. PMMA diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L90/B10): 50,000 h (at 25° C). Panel can be equipped with optical sensors upon individual requestTechnical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear included. Special mounting frame with a total height of only 50 mm available separatelySafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 36.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 165.000 mA, Inrush current: 60 A, Inrush current duration Th50: 2.72 µs, Max. number of light fittings circuit breaker B16: 12, Max. number of light fittings on circuit breaker C10 A: 10, Max. number of light fittings circuit breaker C16: 16, Power factor ?: > 0.90, Harmonic content: < 20 %, Protection class: II, Impulse voltage strength (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 5040 lm, Total luminous flux of the included light sources: 6000 lm, Luminous efficacy: 140 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 120 °, UGR: < 22Dimensions & Weight: Length: 620 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 2200.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Steel, Cover material: Polymethyl methacrylate (PMMA), Material of the light-emitting surface: Acrylic glass (PMMA), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+70 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP54/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 50000 h, Number of switching cycles: 100000Control gear: Output current: 600…1200 mA, Switching Power Supply - Output ripple current: < 5 %, Switching Power Supply - Length: 119.0 mm, Switching Power Supply - Width: 45 mm, Switching Power Supply - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Indoor light fitting with high luminous efficacy. Integrated Zigbee 3.0 driver for extended functionalities. Up to 55% energy savings compared to light fittings using compact fluorescent lamps. Easy and quick installation. Very homogeneous lightProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Extended service life (L70/B10): up to 50,000h (at 25°C). Degree of protection: IP44 (ceiling mounting), IP20 (wall mounting). Metal housing, PMMA cover. Operating ambient temperature range: -20…+40 °C. For indoor use only, not suitable for outdoor useTechnical equipment: Replacement cover optionally availableSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. Product of protection class I. All electrically conductive, metallic housing parts that can carry voltage during operation or during maintenance in the event of a fault must be continuously connected to the protective conductor.Electrical data: Rated power: 42.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 180.000 mA, Inrush current: 10.90 A, Inrush current duration Th50: 330 µs, Max. number of light fittings circuit breaker B16: 25, Max. number of light fittings on fuse switch C10 A: 26, Max. number of light fittings circuit breaker C16: 43, Power factor ?: > 0.90, Harmonic content: < 10 %, Protection class: IPhotometric data: Luminous flux: 3500 lm, Luminous efficacy: 83 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: < 5 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 120 °Dimensions & Weight: Diameter: 500.00 mm, Height: 105.00 mm, Product weight: 1260.00 gMaterials & Colors: Product color: White, Housing color: White, Housing material: Steel, Cover material: Polymethyl methacrylate (PMMA), Material of the light-emitting surface: Acrylic glass (PMMA), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+45 °C, Storage temperature range: -20…+80 °C, Connection type: Terminal, 3-pin, Degree of protection: IP44, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Surface-mounted, Installation location: Ceiling, Wall, Application environment: Indoor applications, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 50000 h, Service life L80/B10 at 25 °C: 45000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 1000 mA, Electronic control gear - Output ripple current: < 30 %Emergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 6 W, Luminous flux in emergency operation: 600 lmCertificates & Standards: Standards: CE, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Product note: Available from December 2025, Additional function: VIVARES, Eligible for BEG funding: NoPRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES: Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled material in the product: 0 %, Recyclability of the product: Predominantly recyclable product, Recyclability of the packaging: Predominantly recyclable packaging, List of hazardous

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Interior light fitting with high luminous efficacy. Integrated Zigbee 3.0 driver for extended functionalities. Up to 55 % energy savings compared to light fittings using compact fluorescent lamps. Easy and quick installation. Very homogeneous lightProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Extended service life (L70/B10): up to 50,000h (at 25°C). Degree of protection: IP44 (ceiling mounting), IP 20 (wall mounting). Metal housing, PMMA cover. Operating ambient temperature range: -20…+40 °C. For indoor use only, not suitable for outdoor useTechnical equipment: Replacement cover optionally availableSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. Class I product. All electrically conductive, metallic housing parts that can carry voltage during operation or in the event of a fault during maintenance must be continuously connected to the protective conductor.Electrical data: Rated power: 42,00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 180,000 mA, Inrush current: 10.90 A, Inrush current duration Th50: 330 µs, Max. number of light fittings circuit breaker B16: 25, Max. number of light fittings fuse C10 A: 26, Max. number of light fittings circuit breaker C16: 43, Power factor ?: > 0,90, Harmonic content: < 10 %, Protection class: IPhotometric data: Luminous flux: 3500 lm, Luminous efficacy: 83 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: < 5 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 120 °Dimensions & Weight: Diameter: 500,00 mm, Height: 105,00 mm, Product weight: 1260,00 gMaterials & Colors: Product color: White, Housing color: White, Housing material: Steel, Cover material: Polymethyl methacrylate (PMMA), Material of the light-emitting surface: Acrylic glass (PMMA), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+45 °C, Storage temperature range: -20…+80 °C, Connection type: Terminal, 3-pin, Degree of protection: IP44, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Surface-mounted, Installation location: Ceiling, Wall, Application environment: Indoor applications, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 50000 h, Service life L80/B10 at 25 °C: 45000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 1000 mA, Electronic control gear - Output ripple current: < 30 %Emergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 6 W, Luminous flux in emergency operation: 600 lmCertificates & Standards: Standards: CE, UKCA, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Product note: Available from December 2025, Additional function: VIVARES, Eligible for BEG funding: NoPRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES: Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled material in the product: 0 %, Recyclability of the product: Predominantly recyclable product, Recyclability of the packaging: Predominantly recyclable packaging, List of hazardous

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Energy saving thanks to high system light output: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: ? 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 13.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 64.000 mA, Inrush current: 24.8 A, Inrush current duration Th50: 6.2 µs, Max. Number of light fittings circuit breaker B16: 30, Max. No. of light fittings on circuit breaker C10 A: 24, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 1430 lm / 1300 lm, Light output: 110 lm/W / 100 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Radiation angle: 95 °Dimensions & Weight: Diameter: 116.00 mm, Height: 48.00 mm, Product weight: 300.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 100 mm, Recessed depth: 48 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 400 mA, SMPS - Output ripple current: < 10 %, SMPS - Length: 178 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 339 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, BEG eligible: NoPRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES: Minimum proportion of recycled material in the

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Energy saving thanks to high system light output: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: ? 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 18.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 84.000 mA, Inrush current: 24.8 A, Inrush current duration Th50: 6.34 µs, Max. Number of light fittings circuit breaker B16: 30, Max. No. of light fittings on fuse switch C10 A: 24, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 2160 lm / 1980 lm, Light output: 120 lm/W / 110 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement (Pst LM): < 1, Measurement for stroboscopic effects (SVM): < 0.4, Radiation angle: 95 °Dimensions & Weight: Diameter: 160.00 mm, Height: 57.00 mm, Product weight: 400.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 150 mm, Recessed depth: 57 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 450 mA, SMPS - Output ripple current: < 10 %, SMPS - Length: 178 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 373 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, Eligible for BEG funding: YesPRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES: Minimum proportion of recycled material in the

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Energy saving thanks to high system light output: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: ? 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 30.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 144.000 mA, Inrush current: 27.9 A, Inrush current duration Th50: 178 µs, Max. Number of light fittings circuit breaker B16: 14, Max. No. of light fittings on fuse switch C10 A: 12, Max. Number of light fittings circuit breaker C16: 20, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 3600 lm / 3300 lm, Light output: 120 lm/W / 110 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement (Pst LM): < 1, Measurement for stroboscopic effects (SVM): < 0.4, Radiation angle: 100 °Dimensions & Weight: Diameter: 215.00 mm, Height: 59.00 mm, Product weight: 580.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 200 mm, Recessed depth: 59 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 750 mA, SMPS - Output ripple current: < 10 %, SMPS - Length: 178 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 372 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, Eligible for BEG funding: YesPRODUCT DATA SHEET ON ENVIRONMENTAL PROPERTIES AND CHARACTERISTICS: Minimum proportion of recycled material in the

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Energy saving thanks to high system light output: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: ? 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 42.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 189.000 mA, Inrush current: 26.4 A, Inrush current duration Th50: 189 µs, Max. Number of light fittings circuit breaker B16: 14, Max. No. of light fittings on fuse switch C10 A: 12, Max. Number of light fittings circuit breaker C16: 19, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 5000 lm / 4600 lm, Light output: 120 lm/W / 110 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Radiation angle: 100 °Dimensions & Weight: Diameter: 265.00 mm, Height: 60.00 mm, Product weight: 800.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless connection terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 250 mm, Recessed depth: 60 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 1050 mA, SMPS - Output ripple current: < 10 %, SMPS - Length: 178 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 379 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, Eligible for BEG funding: YesPRODUCT DATA SHEET ON ENVIRONMENTAL CHARACTERISTICS AND FEATURES: Minimum proportion of recycled material in de

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Homogeneous light distribution and reduced glare effect UGR < 19. Energy saving thanks to high system luminous efficacy: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: < 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 13.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 64.000 mA, Inrush current: 24.8 A, Inrush current duration Th50: 6.2 µs, Max. Number of light fittings circuit breaker B16: 30, Max. No. of light fittings on circuit breaker C10 A: 24, Max. Number of light fittings circuit breaker C16: 38, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 1430 lm / 1300 lm, Luminous efficacy: 110 lm/W / 100 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Radiation angle: 55 °, UGR: < 19Dimensions & Weight: Diameter: 116.00 mm, Height: 65.00 mm, Product weight: 310.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 100 mm, Recessed depth: 65 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 400 mA, Electronic control gear - Output ripple current: < 10 %, Electronic control gear - Length: 178 mm, Electronic control gear - Width: 45 mm, Electronic control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 301 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, Eligible for BEG funding: NoPRODUCT DATA SHEET FOR THE ENVIRONMENT

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Homogeneous light distribution and reduced glare effect UGR < 19. Energy saving thanks to high system light output: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Degree of protection: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: < 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 18.00 W, Rated voltage: 220...240 V, Mains frequency: 0/50/60 Hz, Rated current: 84.000 mA, Inrush current: 24.8 A, Inrush current duration Th50: 6.34 µs, Max. number of light fittings circuit breaker B16: 30, Max. number of light fittings on circuit breaker C10 A: 24, Max. number of light fittings circuit breaker C16: 38, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 2160 lm / 1980 lm, Light output: 120 lm/W / 110 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement (Pst LM): < 1, Measurement for stroboscopic effects (SVM): < 0.4, Radiation angle: 55 °, UGR: < 19Dimensions & Weight: Diameter: 160.00 mm, Height: 92.00 mm, Product weight: 420.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20...+40 °C, Storage temperature range: -20...+80 °C, Connection type: Screwless terminal, 3-pole (L, N, PE), Degree of protection: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 150 mm, Recessed depth: 92 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 450 mA, Switching Power Supply - Output ripple current: < 10 %, Switching Power Supply - Length: 178 mm, Switching Power Supply - Width: 45 mm, Switching Power Supply - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 345 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, Eligible for BEG funding: YesPRODUCT DATA SHEET ON THE ENVIRONMENT

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Homogeneous light distribution and reduced glare effect UGR < 19. Energy saving thanks to high system light output: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: < 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 30.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 144.000 mA, Inrush current: 27.9 A, Inrush current duration Th50: 178 µs, Max. Number of light fittings circuit breaker B16: 14, Max. No. of light fittings on circuit breaker C10 A: 12, Max. Number of light fittings circuit breaker C16: 20, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 3600 lm / 3300 lm, Light output: 120 lm/W / 110 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Radiation angle: 55 °, UGR: < 19Dimensions & Weight: Diameter: 215.00 mm, Height: 117.00 mm, Product weight: 610.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 200 mm, Recessed depth: 117 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 750 mA, Control gear - Output ripple current: < 10 %, Control gear - Length: 178 mm, Control gear - Width: 45 mm, Control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 345 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, BEG eligible: YesPRODUCT DATA SHEET FOR THE ENVIRONMENT

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. Homogeneous light distribution and reduced glare effect UGR < 19. Energy saving thanks to high system luminous efficacy: up to 120 lm/W. Very versatile thanks to Multi Select functions. High color rendering Ra > 90. External driver for extended flexibility and easy installation. Through wiring via additional junction box as accessory possible. Protection class: IP44. Easy installation with quick connection. Further variants with DALI-2 driver, Zigbee driver or Emergency Conversion Kit are availableProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Aluminum lighting with four different cutouts and opaque diffuser. Very homogeneous light distribution. Multi Color function. Consistent light color: < 3 SDCM (threshold unit). Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Options for ceiling frame attachments are available. Safety cable for light fittings included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 42.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 189.000 mA, Inrush current: 26.4 A, Inrush current duration Th50: 189 µs, Max. number of light fittings circuit breaker B16: 14, Max. number of light fittings on circuit breaker C10 A: 12, Max. number of light fittings circuit breaker C16: 19, Power factor ?: > 0.90, Harmonic content: < 15 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 5000 lm / 4600 lm, Luminous efficacy: 120 lm/W / 110 lm/W, Color temperature: 3000 K / 4000 K, Light color (designation): Warm white, Cool white, Color rendering index Ra: > 90, Standard deviation of color matching: < 3 sdcm, Flicker-free: Yes, Flicker measurement (Pst LM): < 1, Measurement for stroboscopic effects (SVM): < 0.4, Radiation angle: 60 °, UGR: < 19Dimensions & Weight: Diameter: 265.00 mm, Height: 124.00 mm, Product weight: 860.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+40 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless terminal, 3-pole (L, N, PE), Protection class: IP44/IP20, Protection class IK (impact resistance grade): IK03, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed, Application environment: Indoor applications, Recessed diameter: 250 mm, Recessed depth: 124 mm, With lamp: Yes, Replaceable light source unit: NoService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 40000 h, Number of switching cycles: 100000Control gear: Output current: 1050 mA, SMPS - Output ripple current: < 10 %, SMPS - Length: 178 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 3 W, Luminous flux in emergency operation: 359 lmCertificates & Standards: Standards: CE, UKCA, TÜV, Light fitting with limited surface temperature D-mark: No, Ball impact resistant: No, Replaceable light source (EPREL): Not replaceableAdditional product data: Additional function: VIVARES, Eligible for BEG funding: YesPRODUCT DATA SHEET FOR THE ENV

Product advantages: Complete solution expandable to up to 40 Zigbee Direct light fittings. Easy commissioning via the DIRECT EASY App via Bluetooth – no internet or user account required. High energy efficiency with up to 130 lm/W. Low maintenance due to mains operation. Low flicker values and stepless dimmingProduct properties: 4x PANEL COMFORT 625 ZIGBEE GEN 2. 1x MANUAL CONTROL UNIT SELECT DIRECT 100–240 ZB. Rotary dimmer for flush mounting for manual light control. External driver with junction box for flexible installation. Service life up to 100,000 h (L70/B50 at 25 °C). Easy compatibility with the DIRECT EASY AppSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33 W, Rated voltage: 220…240 V, Type of current: AC/DC, Rated current: 150 mA, Inrush current: 5.24 A, Mains frequency: 0/50/60 Hz, Harmonic content: < 7 %, Power factor ?: 0.95, Surge voltage resistance (L – N): 1000 VPhotometric data: Luminous efficacy: 130 lm/W, Luminous flux: 4320 lm, Correlated color temperature: 4000 K, Color rendering index Ra: >80, Light color (designation): Cool white, Standard deviation of color matching: 3 sdcm, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4Lighting data: Beam angle: 90 °, Start time: < 0.7 sControl gear data: Flicker-free: YesDimensions & Weight: Length: 620 mm, Width: 620 mm, Height: 32.00 mm, Product weight: 9070.00 gColors & Materials: Product color: White, Housing material: Aluminum, Cover material: Polystyrene (PS)Temperatures & Operating Conditions: Ambient temperature range: -10…+50 °CService Life: Rated service life LEDr [PIM]: 100000 h, Service life L70/B50 at 25 °C: 100000 h, Number of switching cycles: 50000Additional product data: Installation location: Ceiling, Flicker-free: Yes, Additional function: VIVARESApplication possibilities: Dimmable: Yes, DIM interface: Zigbee 3.0, IoT, Suitable for emergency lighting: YesCertificates & Standards: Standards: CE, CB, TÜV, UKCA, Protection class: II, Degree of protection: IP40/IP20LOGISTIC DATA: Storage temperature range: -20…+80 °CPRODUCT DATA SHEET ON ENVIRONMENTAL PROPERTIES AND CHARACTERISTICS: Minimum proportion of recycled material in the packaging: 80 %, Minimum proportion of recycled material in the product: 0 %, Recyclability of the product: Predominantly recyclable product, Recyclability of the packaging: Predominantly recyclable packaging, List of hazardous substances contained in the product in concentrations greater than 0.1 % by mass: No, Contains substances of particular concern in concentrations of more than 0.1 % by mass: NoEAN/GTIN: 4099854704161