Ledvance LED-Lamp LEDTUBE T8 EM 6KV R S 1500 22.1W830

Product advantages: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. High overvoltage protection: up to 6 kV (L-N). The LED tube can be rotated up to 90° to either side thanks to rotatable end caps. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. For particularly homogeneous illumination. Service life up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliantTechnical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 14 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Rated current: 64 mA, Type of current: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 116, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 12, Max. Number of lamps on LS switch B16 A: 100, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 187, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor ?: 0.90, Surge voltage strength (L – N): 6 kVPhotometric data: Luminous flux: 2300 lm, Luminous efficacy: 164 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ±5 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 191.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at measuring point tc: 68 °C, Operating temperature according to IEC 62717: 39 °CService life: Service life L70/B50 at 25 °C: 100000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ≥ 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 14.00 kWh/1000h, Degree of protection: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData ge

Product benefits: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to the glass tube. Splinter protection thanks to a special PET coating. Supports the implementation of HACCP principles from production right through to product display. Very high switching durability. High luminous flux for demanding lighting tasks. Simple, quick and safe lamp replacement without rewiring. Energy savings of up to 62 per cent (compared to T8 fluorescent lamps). Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in ballast-operated luminaires or at mains voltage. High surge protection: up to 6 kV (L-N). Thanks to rotatable end caps, the LED tube can be rotated by up to 90° to either side. Low flicker in accordance with EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Glass lamp tube with shatter protection for applications such as in the food industry. ENEC 10 VDE mark. For particularly uniform illumination. Service life of up to 100,000 h. Protection class: IP20. Mercury-free and RoHS-compliantTechnical specifications: Suitable for use with low-loss and conventional ballastsLegal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Electrical data: Rated power: 22.1 W, Rated voltage: 220–240 V, Operating mode: magnetic ballast/electronic ballast, Mains voltage, Rated current: 100 mA, Current type: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, DC input voltage: 186–260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on circuit breaker B10 A: 80, Max. number of lamps on circuit breaker B10 A – KVG/VVG without compensation: 80, Max. number of lamps on circuit breaker B10 A – KVG/VVG with compensation: 12, Max. number of lamps on circuit breaker B16 A: 100, Max. number of lamps on circuit breaker B16 A – KVG/VVG without compensation: 120, Max. number of lamps on circuit breaker B16 A – KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor?: 0.90, Surge voltage withstand (L – N): 6 kVPhotometric data: Luminous flux: 4100 lm, Luminous efficacy: 185 lm/W, Luminous flux maintenance at the end of rated life: 0.70, Colour temperature (designation): Cool white, Colour temperature: 4000 K, Colour rendering index Ra: 80, Colour rendering: 840, Standard deviation of colour matching: ?5 sdcm, rated LLMF at 6,000 h: 0.80, flicker parameter (Pst LM): 1, stroboscopic effect parameter (SVM): 0.4Illumination data: Beam angle: 190°, Warm-up time (60 %): ‹ 0.50 s, Start-up time: < 0.5 sDimensions & weight: Overall length: 1,513.00 mm, Length including base but excluding base pin: 1,500.00 mm, Diameter: 26.00 mm, Product weight: 264.00 gTemperatures & operating conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the measurement point tc: 82 °C, Operating temperature according to IEC 62717: 49 °CService life: L70/B50 service life at 25 °C: 100,000 h, Number of switching cycles: 200,000, Luminous flux retention at end of service life: 0.70, Note: Lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Applications: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 23.00 kWh/1,000 h, Protection rating: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN 62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTICS DATA: Storage temperature range: -20…+80 °CData