Ledvance LED lamp LEDTUBE T8 EM 6KV R S 1500 22.1W840

Product advantages: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. High overvoltage protection: up to 6 kV (L-N). The LED tube can be rotated up to 90° to either side thanks to rotatable end caps. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. For particularly homogeneous illumination. Service life up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliantTechnical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 14 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Rated current: 64 mA, Type of current: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 116, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 12, Max. Number of lamps on LS switch B16 A: 100, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 187, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor ?: 0.90, Surge voltage strength (L – N): 6 kVPhotometric data: Luminous flux: 2300 lm, Luminous efficacy: 164 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ±5 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 191.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at measuring point tc: 68 °C, Operating temperature according to IEC 62717: 39 °CService life: Service life L70/B50 at 25 °C: 100000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ≥ 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 14.00 kWh/1000h, Degree of protection: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData ge

Product advantages: Light exactly where it is needed, thanks to rotatable end caps. No sagging thanks to glass tube. Shatter protection thanks to special PET coating. Support in the implementation of HACCP concepts from production to product presentation. Very high switching strength. High luminous flux for demanding lighting tasks. Easy, fast and safe lamp replacement without rewiring. Energy saving of up to 62% (compared to T8 fluorescent lamp). Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. High surge protection: up to 6 kV (L-N). The LED tube can be rotated up to 90° to either side thanks to rotatable end caps. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Lamp tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. For particularly homogeneous illumination. Service life up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliantTechnical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 22.1 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Rated current: 100 mA, Type of current: Alternating current (AC), Inrush current: 7.5 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 80, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 12, Max. Number of lamps on LS switch B16 A: 100, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 15, Harmonic content: < 20 %, Power factor ?: 0.90, Surge voltage strength (L – N): 6 kVPhotometric data: Luminous flux: 3700 lm, Luminous efficacy: 167 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ±5 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1513.00 mm, Length with base but without base pin: 1500.00 mm, Diameter: 26.00 mm, Product weight: 264.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at measuring point tc: 82 °C, Operating temperature according to IEC 62717: 49 °CService life: Service life L70/B50 at 25 °C: 100000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ≥ 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from March 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 23.00 kWh/1000h, Degree of protection: IP20, Standards: CE, UKCA, EAC, ENEC, VDE, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData