Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. High lumen output of up to 5220 lm. Energy saving thanks to high system light output: up to 160 lm/W. High color consistency with SDCM 3. Good anti-glare (UGR < 19). External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Tool-free electrical connection thanks to push-button terminal block. Loop-through wiring possible with included junction box. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versionsProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Service life (L80/B10): 100,000 h (at 25 °C), (L90/B10): 50,000 h (at 25 °C). 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Frame made of extruded aluminum, metal housing. Polystyrene diffuserTechnical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear included. Serviceable light fitting: Upgrades and spare parts availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 32.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 150.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Surge voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 5160 lm, Light output: 155 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 2050.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 620 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 59000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, SMPS - Output ripple current: 3.0 %, SMPS - Length: 119.0 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. High lumen output of up to 5220 lm. Energy saving thanks to high system light output: up to 160 lm/W. High color consistency with SDCM 3. Good anti-glare (UGR < 19). External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Tool-free electrical connection thanks to push-button terminal block. Through-wiring possible with included junction box. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versionsProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Service life (L80/B10): 100,000 h (at 25 °C), (L90/B10): 50,000 h (at 25 °C). 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Frame made of extruded aluminum, metal housing. Polystyrene diffuserTechnical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear included. Serviceable light fitting: Upgrades and spare parts availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 32.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 150.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Surge voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 5220 lm, Light output: 160 lm/W, Color temperature: 4000 K, Light color (designation): Cool white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 2050.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 620 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 59000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, EVG - Output ripple current: 3.0 %, EVG - Length: 119.0 mm, EVG - Width: 45 mm, EVG - Height: 25 mmEmergency