Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power / lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 45mA, Power factor: 0.90, Lamp power: 9.7W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1700lm, Rated luminous flux according to IEC 62612: 1700lm, Lamp luminous efficacy: 175lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: Other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 908.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 10.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432200

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter-proof. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use at mains voltage. Multi-lumen function: 2 power levels selectable (1200 mm, 1500 mm). Glass LED tube with shatter protection for applications such as those in the food industry. Single and tandem operation with a conventional ballast (0.6 m version). Very long service life: up to 75,000 hours. Protection class: IP20. Mercury-free and RoHS-compliant. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 67 per cent (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. Highly versatile thanks to selectable power and lumen levels (1200 mm, 1500 mm). No sagging thanks to the glass construction. Supports the implementation of HACCP concepts from production right through to product display. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20…+50°C. Lighting in industrial manufacturing. Traffic areas and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, rated current: 60–70 mA, power factor: 0.90, lamp power: 15.60 W, voltage type: AC, suitable for electronic ballasts: No, Suitable for magnetic ballast: Yes, Luminous flux: 2300 lm, Rated luminous flux according to IEC 62612: 2300 lm, Lamp luminous efficacy: 147 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: G13, Colour: other, Colour temperature: 3000 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1212.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 16.00 kWh, Average rated lifespan: 75,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432828

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 17.7 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 80 mA, Type of current: Alternating current (AC), Inrush current: 15.6 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. number of lamps on LS switch B10 A: 100, Max. number of lamps on LS switch B10 A - KVG/VVG without compensation: 75, Max. number of lamps on LS switch B10 A - KVG/VVG with compensation: 20, Max. number of lamps on LS switch B16 A: 160, Max. number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. number of lamps on LS switch B16 A - KVG/VVG with compensation: 24, Harmonic content: 18 %, Power factor ?: 0.90Photometric data: Luminous flux: 2160 lm, Luminous efficacy: 122 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 175.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 85 °C, Operating temperature according to IEC 62717: 50 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 18.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SI

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 8.8 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 40 mA, Type of current: Alternating current (AC), Inrush current: 10.0 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 60, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 61, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 27, Max. Number of lamps on LS switch B16 A: 75, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 76, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 34, Harmonic content: 16.5 %, Power factor ?: 0.90Photometric data: Luminous flux: 1200 lm, Luminous efficacy: 136 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool daylight, Color temperature: 6500 K, Color rendering index Ra: 80, Light color: 865, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 908.00 mm, Length with base but without base pin: 900.00 mm, Diameter: 26.00 mm, Product weight: 143.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 9.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature:

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 50-65mA, Power factor: 0.90, Lamp power: 14.0W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2600lm, Rated luminous flux according to IEC 62612: 2600lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: Other, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432781

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 17.7 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 80 mA, Type of current: Alternating current (AC), Inrush current: 15.6 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 100, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 75, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 20, Max. Number of lamps on LS switch B16 A: 160, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 120, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 24, Harmonic content: 18 %, Power factor ?: 0.90Photometric data: Luminous flux: 2400 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 1212.00 mm, Length with base but without base pin: 1200.00 mm, Diameter: 26.00 mm, Product weight: 175.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 85 °C, Operating temperature according to IEC 62717: 50 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 18.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SI

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 52mA, Power factor: 0.90, Lamp power: 11.4W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: Other, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1060.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 12.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432361

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatter protection for applications e.g. in the food industry. Single and tandem operation on conventional ballast (0.6 m version). Very long service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 67% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 83-100mA, Power factor: 0.90, Lamp power: 23.10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 3700lm, Rated luminous flux according to IEC 62612: 3700lm, Lamp luminous efficacy: 160lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: Other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 24.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432705

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.3W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 990lm, Rated luminous flux according to IEC 62612: 990lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: Other, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee: No, Bluetooth: No, Wi-Fi: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432040

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatter protection for applications e.g. in the food industry. Single and tandem operation on conventional control gear (0.6 m version). Very long service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-reduced according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 67% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 32mA, Power factor: 0.90, Lamp power: 7W, Voltage type: AC, Suitable for control gear: No, Suitable for magnetic ballast: Yes, Luminous flux: 990lm, Rated luminous flux according to IEC 62612: 990lm, Lamp luminous efficacy: 141lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: G13, Color: other, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432101

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Degree of protection: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 6.3 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 28 mA, Type of current: Alternating current (AC), Inrush current: 9.2 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 171, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 100, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 22, Max. Number of lamps on LS switch B16 A: 214, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 160, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 26, Harmonic content: 17 %, Power factor ?: 0.90Photometric data: Luminous flux: 765 lm, Luminous efficacy: 121 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 3000 K, Color rendering index Ra: 80, Light color: 830, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 732.00 mm, Length with base but without base pin: 720.00 mm, Diameter: 26.00 mm, Product weight: 110.00 gTemperatures & Operating conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 75 °C, Operating temperature according to IEC 62717: 40 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: E, Energy consumption: 7.00 kWh/1000h, Degree of protection: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. Single and tandem operation on conventional ballast (0.6 m version). Very long service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-reduced according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 67% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 32mA, Power factor: 0.90, Lamp power: 7W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matt, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: Other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432125

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. Single and tandem operation on conventional control gear (0.6 m version). Very long service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-reduced according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 67% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 60-70mA, Power factor: 0.90, Lamp power: 15.60W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 2500lm, Rated luminous flux according to IEC 62612: 2500lm, Lamp luminous efficacy: 160lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matt, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: Other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 16.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432842

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter-proof. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use at mains voltage. Multi-lumen function: 2 power levels selectable (1200 mm, 1500 mm). Glass LED tube with shatter protection for applications such as in the food industry. Single and tandem operation with a conventional ballast (0.6 m version). Very long service life: up to 75,000 hours. Protection class: IP20. Mercury-free and RoHS-compliant. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 67 per cent (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. Highly versatile thanks to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to the glass construction. Supports the implementation of HACCP concepts from production right through to product display. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of –20 to +50 °C. Lighting in industrial manufacturing. Traffic areas and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, rated current: 83–100 mA, power factor: 0.90, lamp power: 23.10 W, voltage type: AC, suitable for electronic ballasts: No, Suitable for magnetic ballast: Yes, Luminous flux: 3300 lm, Rated luminous flux according to IEC 62612: 3300 lm, Luminous efficacy: 142 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: G13, Colour: other, Colour temperature: 3000 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1513.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 24.00 kWh, Average rated service life: 75,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432682

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power / lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 50-65mA, Power factor: 0.90, Lamp power: 14.0W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2600lm, Rated luminous flux according to IEC 62612: 2600lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: G13, Color: other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432767

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.3W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 174lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: Other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432064

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 30mA, Power factor: 0.90, Lamp power: 6.3W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 174lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: Other, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim dimming: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432088

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatter protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 64mA, Power factor: 0.90, Lamp power: 14W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2600lm, Rated luminous flux according to IEC 62612: 2600lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 90-100, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Neutral white 3300 to 5300 K, Base: G13, Color: Other, Color temperature: 4000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1212.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: B, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 14.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432804

"Product advantages: Energy saving of up to 72 % (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. No sagging thanks to glass technology. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperaturesProduct properties: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Single and tandem operation on conventional control gear (versions ? 0.9 m). Tube made of glass. Long service life of up to 50,000 h. Homogeneous illumination. Mercury-free and RoHS-compliant. Protection class: IP20. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1)Technical equipment: Suitable for operation with low-loss and conventional control gearLegal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system.Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Electrical data: Rated power: 7.4 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, DC, Rated current: 33 mA, Type of current: Alternating current (AC), Inrush current: 8 A, Suitable for DC operation: Yes, Input voltage DC: 186…260 V, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 69, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 68, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 30, Max. Number of lamps on LS switch B16 A: 87, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 86, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 37, Harmonic content: 16.2 %, Power factor ?: 0.90Photometric data: Luminous flux: 1000 lm, Luminous efficacy: 135 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker metric (Pst LM): 1, Metric for stroboscopic effects (SVM): 0.4Lighting data: Radiation angle: 190 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 603.00 mm, Length with base but without base pin: 600.00 mm, Diameter: 26.00 mm, Product weight: 97.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+45 °C, Maximum temperature at measuring point tc: 80 °C, Operating temperature according to IEC 62717: 54 °CService life: Service life L70/B50 at 25 °C: 50000 h, Number of switching cycles: 200000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): G13, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from June 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: D, Energy consumption: 8.00 kWh/1000h, Protection class: IP20, Standards: CE; EAC; UKCA, Photobiological risk group according to EN62778: RG0Country-specific information: Order number: LEDTUBE T8 EM VLOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Used lighting technology: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): G13, Networked light source (CLS): No, Color-matched light source: No, Envelope: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALU

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 75-100mA, Power factor: 0.90, Lamp power: 22.10W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3700lm, Rated luminous flux according to IEC 62612: 3700lm, Lamp luminous efficacy: 167lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: Other, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 1513.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Min. Number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 23.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432606

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, fast and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, rated current: 52mA, power factor: 0.90, lamp power: 11.4W, voltage type: AC, suitable for EVG: No, suitable for magnetic control gear: Yes, luminous flux: 2000lm, rated luminous flux according to IEC 62612: 2000lm, lamp luminous efficacy: 175lm/W, color rendering index CRI: 80-89, filament lamp: No, design glass/cover: frosted, light color according to EN 12464-1: neutral white 3300 to 5300 K, base: G13, color: other, color temperature: 4000K, radiation angle: 190.00°, color consistency (McAdam ellipse): SDCM5, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, without dimming function: Yes, diameter: 26.70mm, length: 1060.00mm, degree of protection (IP): IP20, energy efficiency class according to EU directive 2019/2015: C, lamp designation: T8, min. number of switching operations: 200000, weighted energy consumption in 1,000 hours: 12.00kWh, average rated service life: 100000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG0, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432385

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatter-proof. Product features: LED replacement for conventional T8 fluorescent lamps with a G13 base in KVG luminaires or for use at mains voltage. Multi-lumen function: 2 power levels selectable (1200 mm, 1500 mm). Glass LED tube with shatter protection for applications such as in the food industry. Single and tandem operation with a conventional ballast (0.6 m version). Very long service life: up to 75,000 hours. Protection class: IP20. Mercury-free and RoHS-compliant. Low flicker in accordance with EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product benefits: Energy savings of up to 67% (compared to T8 fluorescent lamps). Simple, quick and safe lamp replacement with or without rewiring. Highly versatile thanks to selectable power and lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Supports the implementation of HACCP concepts from production right through to product presentation. Very high switching durability. Full brightness without a warm-up phase, making it ideally suited for use with sensor systems. Also suitable for operation at low temperatures. Areas of application: General lighting at ambient temperatures of -20…+50°C. Lighting in industrial manufacturing. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical specifications: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for use with electronic ballasts. Use in outdoor applications is possible in suitable damp-proof luminaires in accordance with the data sheet and installation instructions. Not suitable for emergency lighting. Disconnect from the mains before installation.Rated voltage: 220–240 V, rated current: 60–70 mA, power factor: 0.90, lamp power: 15.60 W, voltage type: AC, suitable for electronic ballasts: No, Suitable for magnetic ballast: Yes, Luminous flux: 2500 lm, Rated luminous flux according to IEC 62612: 2500 lm, Lamp luminous efficacy: 160 lm/W, Colour rendering index (CRI): 80–89, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: daylight white >5300 K, Base: G13, Colour: other, Colour temperature: 6500 K, Beam angle: 190.00°, Colour consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70 mm, Length: 1212.00 mm, Protection rating (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: C, Lamp designation: T8, Minimum number of switching cycles: 200,000, Weighted energy consumption over 1,000 hours: 16.00 kWh, Average rated service life: 75,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432866

LED tubes for electromagnetic ballasts (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG luminaires or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. Single and tandem operation on conventional ballast (0.6 m version). Very long service life: up to 75,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-free according to EU 2019/2020 (SVM ≤ 0.4 / PstLM ≤ 1). Product advantages: Energy saving of up to 67% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional ballasts. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic ballast. Use in outdoor applications is possible in suitable damp room luminaires according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation. Rated voltage: 220-240V, Rated current: 32mA, Power factor: 0.90, Lamp power: 7W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic ballast: Yes, Luminous flux: 1100lm, Rated luminous flux according to IEC 62612: 1100lm, Lamp luminous efficacy: 157lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matt, Light color according to EN 12464-1: Daylight white >5300 K, Base: G13, Color: Other, Color temperature: 6500K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 26.70mm, Length: 603.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 7.00kWh, Average rated service life: 75000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432149

Powerful LED tubes for electromagnetic control gear (KVG/VVG) and mains voltage, shatterproof. Product features: LED replacement for conventional T8 fluorescent lamps with G13 base in KVG light fittings or at mains voltage. Multi Lumen function: 2 power levels selectable (1200 mm, 1500 mm). LED tube made of glass with shatterproof protection for applications e.g. in the food industry. ENEC 10 VDE mark. Single and tandem operation on conventional control gear (versions ? 0.9 m). Extremely long service life: up to 100,000 h. Degree of protection: IP20. Mercury-free and RoHS-compliant. Flicker-reduced according to EU 2019/2020 (SVM ? 0.4 / PstLM ? 1). Product advantages: Energy saving of up to 71% (compared to T8 fluorescent lamp). Easy, quick and safe lamp replacement with or without rewiring. Very versatile due to selectable power/lumen levels (1200 mm, 1500 mm). No sagging thanks to glass technology. Support in the implementation of HACCP concepts from production to goods presentation. Very high switching strength. Full brightness without warm-up phase, therefore ideally suited in combination with sensors. Also suitable for operation at low temperatures. Areas of application: General lighting in ambient temperatures of -20…+50°C. Lighting in industrial production. Traffic zones and corridors. Supermarkets and department stores. Industry. Technical equipment: Suitable for operation with low-loss and conventional control gear. Legal notice: When replacing a T8 fluorescent lamp, the overall energy efficiency and light distribution depend on the design of the system. Safety instructions: Not suitable for operation with electronic control gear. Installation in outdoor applications is possible in suitable damp room light fittings according to data sheet and installation instructions. Not suitable for emergency lighting. Disconnect mains power before installation.Rated voltage: 220-240V, Rated current: 24mA, Power factor: 0.90, Lamp power: 5.1W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 810lm, Rated luminous flux according to IEC 62612: 810lm, Lamp luminous efficacy: 158lm/W, Color rendering index CRI: 80-89, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: G13, Color: Other, Color temperature: 3000K, Radiation angle: 190.00°, Color consistency (McAdam ellipse): SDCM5, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 26.70mm, Length: 450.00mm, Degree of protection (IP): IP20, Energy efficiency class according to EU Directive 2019/2015: D, Lamp designation: T8, Min. number of switching operations: 200000, Weighted energy consumption in 1,000 hours: 6.00kWh, Average rated service life: 100000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854432446