LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. Only suitable for temperatures up to 50°C inside the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections may only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 13.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 138lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 75.00mm, Length: 151.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 23, Weighted energy consumption in 1.000 hours: 13.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071737

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 135mA, Power factor: 0.90, Lamp power: 29.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 4000lm, Rated luminous flux according to IEC 62612: 4000lm, Lamp luminous efficacy: 137lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 76.00mm, Length: 172.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 29.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040702

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78 per cent energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100 per cent light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When fitted horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Only suitable for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 13.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 2000 lm, Rated luminous flux according to IEC 62612: 2000 lm, Lamp luminous efficacy: 153 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour temperature: 4000 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 75.00 mm, Length: 151.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 23, Weighted energy consumption over 1,000 hours: 13.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071751

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78 per cent energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100 per cent light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When fitted horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Only suitable for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 265mA, Power factor: 0.90, Lamp power: 60.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 8100 lm, Rated luminous flux according to IEC 62612: 8100 lm, Lamp luminous efficacy: 135 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: E40, Colour temperature: 2700 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 120.00 mm, Length: 260.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 10, Weighted energy consumption over 1,000 hours: 60.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071935

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High overvoltage protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 67mA, Power factor: 0.90, Lamp power: 14.50W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 124lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: Matted, Light color according to EN 12464-1: Warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 56.00mm, Length: 138.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. Number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 15.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040603

LED replacement for HQL lamps for demanding outdoor lighting applications. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation on mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. High surge protection: up to 6 kV (L-N). Product benefits: Saves up to 78% energy when used as a replacement for mercury vapour lamps (HQL). Low maintenance requirements due to long service life. Immediate 100% light output, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor use only in suitable luminaires. Safety instructions: The lamp may be larger and heavier than the lamp it is replacing. Before installation, check that the luminaire – and in particular the socket – is suitable for supporting the weight of the lamp. Where possible, fit the safety cable supplied in the lamp’s packaging to the 90 W lamp types. Not suitable for use with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 67mA, Power factor: 0.90, Lamp power: 14.50W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 2000 lm, Rated luminous flux according to IEC 62612: 2000 lm, Lamp luminous efficacy: 137 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour: white, Colour temperature: 4000 K, Housing colour: white, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 56.00 mm, Length: 138.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 20, Weighted energy consumption over 1,000 hours: 15.00 kWh, Average rated service life: 60,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040627

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 190mA, Power factor: 0.90, Lamp power: 41.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 6000lm, Rated luminous flux according to IEC 62612: 6000lm, Lamp luminous efficacy: 146lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 80.00mm, Length: 195.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. Number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 41.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040740

LED replacement for HQL lamps for demanding outdoor lighting applications. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation on mains voltage without a ballast. Power factor: 0.9. Protection rating: IP65. High surge protection: up to 6 kV (L-N). Product benefits: Saves up to 78% energy when used as a replacement for mercury vapour lamps (HQL). Low maintenance requirements due to long service life. Immediate 100% light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor use only in suitable luminaires. Safety instructions: The lamp may be larger and heavier than the lamp it is replacing. Before installation, check that the luminaire – and in particular the socket – is suitable for supporting the weight of the lamp. Where possible, fit the safety cable supplied in the lamp’s packaging to the 90 W lamp types. Not suitable for use with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 190mA, Power factor: 0.90, Lamp power: 41.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 5400 lm, Rated luminous flux according to IEC 62612: 5400 lm, Lamp luminous efficacy: 131 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: No, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: E40, Colour: white, Colour temperature: 2700 K, Housing colour: white, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 80.00 mm, Length: 202.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 20, Weighted energy consumption over 1,000 hours: 41.00 kWh, Average rated service life: 60,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040764

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 135mA, Power factor: 0.90, Lamp power: 29.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3600lm, Rated luminous flux according to IEC 62612: 3600lm, Lamp luminous efficacy: 124lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 76.00mm, Length: 172.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 29.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040689

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 190mA, Power factor: 0.90, Lamp power: 41.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 5400lm, Rated luminous flux according to IEC 62612: 5400lm, Lamp luminous efficacy: 131lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: white, Color temperature: 2700K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 80.00mm, Length: 195.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 41.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040726

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the securing cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 100mA, Power factor: 0.90, Lamp power: 21.50W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3000lm, Rated luminous flux according to IEC 62612: 3000lm, Lamp luminous efficacy: 139lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color: white, Color temperature: 4000K, Housing color: white, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 76.00mm, Length: 145.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 22.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG0, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040665

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. High overvoltage protection: up to 6 kV (L-N). Product advantages: Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). Low maintenance due to long service life. 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. If possible, attach the safety cable included in the package with the lamp for the 90 W lamp types. Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is on the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must be carried out by qualified personnel only. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 410mA, Power factor: 0.90, Lamp power: 90.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 11700lm, Rated luminous flux according to IEC 62612: 11700lm, Lamp luminous efficacy: 130lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: clear, Light color according to EN 12464-1: warm white <3300 K, Base: E40, Color temperature: 2700K, Housing color: grey, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 110.00mm, Length: 270.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: E, Min. number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 90.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854040801

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 105mA, Power factor: 0.90, Lamp power: 24.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3600lm, Rated luminous flux according to IEC 62612: 3600lm, Lamp luminous efficacy: 150lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 90.00mm, Length: 217.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 19, Weighted energy consumption in 1.000 hours: 24.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071812

LED replacement for NAV lamps for design-oriented applications in outdoor lighting. Product features: Suitable for operation with conventional control gear (KVG, VVG) or 230 V mains voltage. Very high efficiency of up to 190 lm/W. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional NAV lamps with tubular, clear full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for sodium vapor lamps (NAV). 100 % light immediately, no warm-up time. Similar light distribution to traditional NAV lamps. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 90mA, Power factor: 0.90, Lamp power: 21.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 4000lm, Rated luminous flux according to IEC 62612: 4000lm, Lamp luminous efficacy: 190lm/W, Color rendering index CRI: 70-79, Lamp shape: other, Filament lamp: Yes, Design glass/cover: clear, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color temperature: 4000K, Emission angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 38.00mm, Length: 170.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: B, Min. number of switching operations: 100000, Total harmonic distortion (THD): 15, Weighted energy consumption in 1.000 hours: 21.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071997

LED replacement for HQL lamps in design-oriented outdoor lighting applications. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78% energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100% light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Not recommended for use in luminaires with close-fitting reflectors or in confined luminaires. Only suitable for temperatures up to 50°C inside the luminaire. Not recommended for use in luminaires with close-fitting reflectors or in confined luminaires. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 89mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 3000 lm, Rated luminous flux according to IEC 62612: 3000 lm, Lamp luminous efficacy: 150 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour temperature: 4000 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 75.00 mm, Length: 151.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 15, Weighted energy consumption over 1,000 hours: 20.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071799

LED replacement for HID lamps for hall light fittings. Product features: Degree of protection: IP40. High overvoltage protection: up to 4 kV (L-N). Product advantages: Direct replacement for conventional HPD lamps thanks to KVG and ignition device compatibility. Suitable for highest energy efficiency for operation with mains voltage without control gear. Up to 68 % energy saving when replacing conventional HQI lamps. Effective thermal management for wide operating temperature range. Low maintenance due to long service life. Immediately 100 % light, no warm-up time. Areas of application: LED alternative for applications with high luminous flux requirements. Industrial and warehouse areas. Outdoor applications only in suitable light fittings. Technical equipment: Fuse cable for the lamp included. Safety instructions: The lamp may be larger and heavier than the replaced lamp. Before installation, it must be checked whether the light fitting, in particular the socket, is suitable to support the weight of the lamp. The fuse cable must be attached. To ensure full light efficiency and product service life, it is recommended to remove the glass or cover of the light fitting. Only suitable for temperatures up to 50°C inside the light fitting. Not suitable for operation with electronic control gear. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 700mA, Power factor: 0.90, Lamp power: 150.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 21000lm, Rated luminous flux according to IEC 62612: 21000lm, Lamp luminous efficacy: 140lm/W, Luminous intensity: 9402cd, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: No, Design glass/cover: clear, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E40, Color: black, Color temperature: 4000K, Housing color: black, Radiation angle: 100.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Dimming Touch and Dim: No, Dimming Zigbee: No, Dimming Bluetooth: No, Dimming Wi-Fi: No, Without dimming function: Yes, Diameter: 250.00mm, Length: 263.00mm, Degree of protection (IP): IP40, Energy efficiency class according to EU Directive 2019/2015: D, Min. Number of switching operations: 100000, Total harmonic distortion (THD): 20, Weighted energy consumption in 1.000 hours: 150.00kWh, Average rated service life: 50000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4058075780408

LED replacement for NAV lamps for design-oriented applications in outdoor lighting, with reduced blue light content. Product properties: Less than 1.5 % blue light content (<500nm). Very warm light color of 1800K, similar to traditional sodium vapor lamps (NAV). Suitable for operation with conventional control gear (KVG, VVG) or 230 V mains voltage. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Support the protection of wildlife thanks to reduced blue light content. Contribute to improving the quality of life of residents by supporting the natural day-night rhythm. Better color rendering and improved visibility compared to traditional sodium vapor lamps (NAV). Same design as traditional NAV lamps with tubular, clear full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 70 % energy when used as a replacement for sodium vapor lamps (NAV). Instant 100 % light, no warm-up time. Similar light distribution to traditional NAV lamps. Areas of application: Road and outdoor lighting. Natural areas. Residential areas. Parks. Historic buildings and districts. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only. Not suitable for household room lighting. Do not touch the lamp if it is damaged.Rated voltage: 220V, rated current: 65mA, power factor: 0.90, lamp power: 15.00W, voltage type: AC, suitable for EVG: No, suitable for magnetic control gear: Yes, luminous flux: 1600lm, rated luminous flux according to IEC 62612: 1600lm, lamp luminous efficacy: 106lm/W, color rendering index CRI: 70-79, lamp shape: other, filament lamp: Yes, design glass/cover: clear, light color according to EN 12464-1: warm white <3300 K, base: E27, color temperature: 1800K, emission angle: 360.00°, color consistency (McAdam ellipse): SDCM6, phase-cut dimming: No, leading-edge dimming: No, touch and dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, no dimming function: Yes, diameter: 38.00mm, length: 170.00mm, degree of protection (IP): IP65, min. number of switching operations: 100000, total harmonic distortion (THD): 30, weighted energy consumption in 1.000 hours: 15.00kWh, average rated service life: 25000h, remote control possible: No, with motion detector: No, with remote control: No, with twilight switch: No, photobiological safety according to EN 62471: RG1, compatible with Apple HomeKit: No, compatible with Google Assistant: No, compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4058075843585

LED replacement for NAV lamps for design-oriented applications in outdoor lighting, with reduced blue light content. Product properties: Less than 1.5% blue light content (<500nm). Very warm light color of 1800K, similar to traditional sodium vapor lamps (NAV). Suitable for operation with conventional control gear (KVG, VVG) or 230V mains voltage. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Support the protection of wildlife thanks to reduced blue light content. Contribute to improving the quality of life of residents by supporting the natural day-night rhythm. Better color rendering and improved visibility compared to traditional sodium vapor lamps (NAV). Same design as traditional NAV lamps with tubular, clear full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360-degree emission angle. Saves up to 70% energy when used as a replacement for sodium vapor lamps (NAV). 100% light immediately, no warm-up time. Similar light distribution to traditional NAV lamps. Areas of application: Road and outdoor lighting. Natural areas. Residential areas. Parks. Historic buildings and districts. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Only suitable for temperatures up to 50°C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only. Not suitable for household room lighting. Do not touch the lamp if it is damaged.Rated voltage: 220V, Rated current: 105mA, Power factor: 0.90, Lamp power: 23.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2500lm, Rated luminous flux according to IEC 62612: 2500lm, Lamp luminous efficacy: 108lm/W, Color rendering index CRI: 70-79, Lamp shape: other, Filament lamp: Yes, Glass/cover design: clear, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 1800K, Emission angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 38.00mm, Length: 210.00mm, Degree of protection (IP): IP65, Min. number of switching operations: 100000, Total harmonic distortion (THD): 30, Weighted energy consumption in 1.000 hours: 23.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4058075843608

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 265mA, Power factor: 0.90, Lamp power: 60.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 9000lm, Rated luminous flux according to IEC 62612: 9000lm, Lamp luminous efficacy: 150lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E40, Color temperature: 4000K, Emission angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 120.00mm, Length: 260.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 10, Weighted energy consumption in 1.000 hours: 60.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071959

LED replacements for NAV lamps for design-oriented applications in outdoor lighting. Product features: Suitable for use with conventional ballasts (KVG, VVG) or 230 V mains voltage. Very high efficiency of up to 190 lm/W. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product benefits: Same design as traditional sodium vapour lamps, with a tubular, clear, all-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78% energy when used as a replacement for sodium vapour lamps (NAV). Immediate 100% light output, no warm-up time. Similar light distribution to traditional NAV lamps. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Suitable only for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must be carried out by qualified personnel only.. Caution: risk of electric shock..Rated voltage: 220V, Rated current: 90mA, Power factor: 0.90, Lamp power: 21.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 3600 lm, Rated luminous flux according to IEC 62612: 3600 lm, Luminous efficacy: 171 lm/W, Colour rendering index (CRI): 70–79, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: clear, Light colour according to EN 12464-1: warm white <3300 K, Base: E27, Colour temperature: 2700 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 38.00 mm, Length: 170.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: C, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 15, Weighted energy consumption over 1,000 hours: 21.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071973

LED replacement for HQL lamps for demanding applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Very high efficiency of 185 lm/W. Power factor: 0.9. Degree of protection: IP65. High surge protection: up to 4 kV (L-N). Very wide ambient temperature range: -20…+60 °C. Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Saves up to 82 % energy when used as a replacement for mercury vapor lamps (HQL). Full utilization of the reflector of the existing light fitting thanks to 360 degree emission angle. Very light product. Low maintenance due to long service life. Immediately 100 % light, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 60 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel.Rated voltage: 220-240V, Rated current: 140mA, Power factor: 0.90, Lamp power: 29.1W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 5400lm, Rated luminous flux according to IEC 62612: 5400lm, Lamp luminous efficacy: 185lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color: other, Color temperature: 2700K, Emission angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 90.00mm, Length: 226.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: B, Min. number of switching operations: 100000, Weighted energy consumption in 1.000 hours: 30.00kWh, Average rated service life: 60000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854470028

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 89mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2700lm, Rated luminous flux according to IEC 62612: 2700lm, Lamp luminous efficacy: 135lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 75.00mm, Length: 151.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 15, Weighted energy consumption in 1.000 hours: 20.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071775

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up timeProduct properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: in indoor applications not to be used in enclosed light fittings. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Power factor ?: > 0.90, Impulse voltage strength (L – N): 2 kVPhotometric data: Luminous flux: 6000 lm, Rated luminous flux 90°: 6000 lm, Luminous efficacy: 187 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 217.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the tc measuring point: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E27, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E27, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L

LED replacement for NAV lamps for design-oriented applications in outdoor lighting, with reduced blue light content. Product properties: Less than 1.5% blue light content (<500nm). Very warm light color of 1800K, similar to traditional sodium vapor lamps (NAV). Suitable for operation with conventional control gear (KVG, VVG) or 230V mains voltage. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Support the protection of wildlife thanks to reduced blue light content. Contribute to improving the quality of life of residents by supporting the natural day-night rhythm. Better color rendering and improved visibility compared to traditional sodium vapor lamps (NAV). Same design as traditional NAV lamps with tubular, clear full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360-degree radiation angle. Saves up to 70% energy when used as a replacement for sodium vapor lamps (NAV). Instant 100% light, no warm-up time. Similar light distribution to traditional NAV lamps. Areas of application: Road and outdoor lighting. Natural areas. Residential areas. Parks. Historic buildings and districts. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Only suitable for temperatures up to 50°C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Not suitable for household room lighting. Do not touch the lamp if it is damaged. Rated voltage: 220V, Rated current: 125mA, Power factor: 0.90, Lamp power: 30.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3200lm, Rated luminous flux according to IEC 62612: 3200lm, Lamp luminous efficacy: 106lm/W, Color rendering index CRI: 70-79, Lamp shape: other, Filament lamp: Yes, Glass/cover design: clear, Light color according to EN 12464-1: warm white <3300 K, Base: E40, Color temperature: 1800K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 46.00mm, Length: 225.00mm, Degree of protection (IP): IP65, Min. number of switching operations: 100000, Total harmonic distortion (THD): 30, Weighted energy consumption in 1.000 hours: 30.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4058075843622