LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. Only suitable for temperatures up to 50°C inside the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections may only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 13.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 1800lm, Rated luminous flux according to IEC 62612: 1800lm, Lamp luminous efficacy: 138lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 75.00mm, Length: 151.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 23, Weighted energy consumption in 1.000 hours: 13.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071737

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78 per cent energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100 per cent light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When fitted horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Only suitable for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 55mA, Power factor: 0.90, Lamp power: 13.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 2000 lm, Rated luminous flux according to IEC 62612: 2000 lm, Lamp luminous efficacy: 153 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour temperature: 4000 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 75.00 mm, Length: 151.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 23, Weighted energy consumption over 1,000 hours: 13.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071751

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78 per cent energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100 per cent light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When fitted horizontally, the lamp’s Tc point is located on the top of the lamp. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. Only suitable for temperatures up to 50°C inside the luminaire. Use in luminaires with close-fitting reflectors and in confined luminaires is not recommended. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 265mA, Power factor: 0.90, Lamp power: 60.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 8100 lm, Rated luminous flux according to IEC 62612: 8100 lm, Lamp luminous efficacy: 135 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: warm white <3300 K, Base: E40, Colour temperature: 2700 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 120.00 mm, Length: 260.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 10, Weighted energy consumption over 1,000 hours: 60.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071935

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 105mA, Power factor: 0.90, Lamp power: 24.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 3600lm, Rated luminous flux according to IEC 62612: 3600lm, Lamp luminous efficacy: 150lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 90.00mm, Length: 217.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 19, Weighted energy consumption in 1.000 hours: 24.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071812

LED replacement for HQL lamps in design-oriented outdoor lighting applications. Product features: Replacement for HQL: Suitable for operation with conventional ballasts (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID lamps: Suitable for operation at mains voltage without a ballast. Power factor: 0.9. Ingress protection: IP65. Surge protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with an ellipsoidal, matt, solid-glass bulb. Full utilisation of the existing luminaire’s reflector thanks to a 360-degree beam angle. Saves up to 78% energy when used as a replacement for mercury vapour lamps (HQL). Immediate 100% light output, no warm-up time. Applications: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable luminaires. Safety instructions: Not suitable for operation with igniters. Operation with a capacitor may lead to a reduction in the system’s power factor. When installed horizontally, the lamp’s Tc point is located on the top of the lamp. Not recommended for use in luminaires with close-fitting reflectors or in confined luminaires. Only suitable for temperatures up to 50°C inside the luminaire. Not recommended for use in luminaires with close-fitting reflectors or in confined luminaires. All electrical connections must only be carried out by qualified personnel. Caution: risk of electric shock.Rated voltage: 220V, Rated current: 89mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for electronic ballast: No, Suitable for magnetic ballast: Yes, Luminous flux: 3000 lm, Rated luminous flux according to IEC 62612: 3000 lm, Lamp luminous efficacy: 150 lm/W, Colour rendering index (CRI): 80–89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light colour according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Colour temperature: 4000 K, Beam angle: 360.00°, Colour consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Phase-lead dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, Without dimming function: Yes, Diameter: 75.00 mm, Length: 151.00 mm, Protection rating (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Minimum number of switching cycles: 100,000, Total harmonic distortion (THD): 15, Weighted energy consumption over 1,000 hours: 20.00 kWh, Average rated service life: 25,000 h, Remote control available: No, With motion sensor: No, With remote control: No, With twilight switch: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071799

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 265mA, Power factor: 0.90, Lamp power: 60.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 9000lm, Rated luminous flux according to IEC 62612: 9000lm, Lamp luminous efficacy: 150lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E40, Color temperature: 4000K, Emission angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 120.00mm, Length: 260.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 10, Weighted energy consumption in 1.000 hours: 60.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071959

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree radiation angle. Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. Only suitable for temperatures up to 50°C within the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings is not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 89mA, Power factor: 0.90, Lamp power: 20.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 2700lm, Rated luminous flux according to IEC 62612: 2700lm, Lamp luminous efficacy: 135lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover design: frosted, Light color according to EN 12464-1: warm white <3300 K, Base: E27, Color temperature: 2700K, Radiation angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 75.00mm, Length: 151.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: D, Min. number of switching operations: 100000, Total harmonic distortion (THD): 15, Weighted energy consumption in 1.000 hours: 20.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071775

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up timeProduct properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: in indoor applications not to be used in enclosed light fittings. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Power factor ?: > 0.90, Impulse voltage strength (L – N): 2 kVPhotometric data: Luminous flux: 6000 lm, Rated luminous flux 90°: 6000 lm, Luminous efficacy: 187 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 217.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the tc measuring point: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E27, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Unbundled or bundled light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E27, Networked light source (CLS): No, Color-matched light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L

LED replacement for HQL lamps for design-oriented applications in outdoor lighting. Product features: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Overvoltage protection: up to 2 kV (L-N). Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Full utilization of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78% energy when used as a replacement for mercury vapor lamps (HQL). 100% light immediately, no warm-up time. Areas of application: Roads. Area lighting. Pedestrian zones. Parks. Outdoor applications only in suitable light fittings. Safety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The Tc point of the lamp is at the top of the lamp when installed horizontally. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. Only suitable for temperatures up to 50°C inside the light fitting. Use in light fittings with closely fitting reflectors and in narrow light fittings not recommended. All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock.Rated voltage: 220V, Rated current: 105mA, Power factor: 0.90, Lamp power: 24.00W, Voltage type: AC, Suitable for EVG: No, Suitable for magnetic control gear: Yes, Luminous flux: 4000lm, Rated luminous flux according to IEC 62612: 4000lm, Lamp luminous efficacy: 166lm/W, Color rendering index CRI: 80-89, Lamp shape: other, Filament lamp: Yes, Glass/cover finish: frosted, Light color according to EN 12464-1: neutral white 3300 to 5300 K, Base: E27, Color temperature: 4000K, Emission angle: 360.00°, Color consistency (McAdam ellipse): SDCM6, Phase-cut dimming: No, Leading-edge dimming: No, Touch and Dim: No, Zigbee dimming: No, Bluetooth dimming: No, Wi-Fi dimming: No, No dimming function: Yes, Diameter: 90.00mm, Length: 217.00mm, Degree of protection (IP): IP65, Energy efficiency class according to EU Directive 2019/2015: C, Min. number of switching operations: 100000, Total harmonic distortion (THD): 19, Weighted energy consumption in 1.000 hours: 24.00kWh, Average rated service life: 25000h, Remote control possible: No, With motion detector: No, With remote control: No, With dusk sensor: No, Photobiological safety according to EN 62471: RG1, Compatible with Apple HomeKit: No, Compatible with Google Assistant: No, Compatible with Amazon Alexa: No, IFTTT support available: YesEAN/GTIN: 4099854071836

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). Instant 100 % light, no warm-up timeProduct properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: in indoor applications not to be used in enclosed light fittings. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Mains power factor ?: > 0.90, Surge voltage resistance (L – N): 2 kVPhotometric data: Luminous flux: 5400 lm, Rated luminous flux 90°: 5400 lm, Luminous efficacy: 168 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 2700 K, Color rendering index Ra: 80, Light color: 827, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 217.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the tc measuring point: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E27, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 5LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy efficiency labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E27, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). 100 % light immediately, no warm-up timeProduct properties: HQL replacement: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement of other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: not to be used in enclosed light fittings in indoor applications. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Mains power factor ?: > 0.90, Surge voltage strength (L – N): 2 kVPhotometric data: Luminous flux: 5400 lm, Rated luminous flux 90°: 5400 lm, Luminous efficacy: 168 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Warm white, Color temperature: 2700 K, Color rendering index Ra: 80, Light color: 827, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 202.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at measuring point tc: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E40, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: C, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 5LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on energy consumption labeling EU 2019/2015: Lighting technology used: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E40, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L

"Product advantages: Same design as traditional HQL lamps with ellipsoidal, matte full glass bulb. Complete use of the reflector of the existing light fitting thanks to 360 degree emission angle. Saves up to 78 % energy when used as a replacement for mercury vapor lamps (HQL). Instant 100 % light, no warm-up timeProduct properties: Replacement for HQL: Suitable for operation with conventional control gear (KVG, VVG) for HQL or 230 V mains voltage. Replacement for other HID: Suitable for operation with mains voltage without control gear. Power factor: 0.9. Degree of protection: IP65. Surge protection: up to 2 kV (L-N). ENEC tested safetySafety instructions: Not suitable for operation with igniters. Operation on the capacitor can lead to a reduction in the power factor of the system. The tc point of the lamp is at the top of the lamp when installed horizontally. 38W/60W: not to be used in enclosed light fittings for indoor applications. Only suitable for temperatures up to 50 °C inside the light fitting. Use in light fittings with close-fitting reflectors and in narrow light fittings not recommended. All electrical connections must be carried out by qualified personnel only.Electrical data: Rated power: 32 W, Rated power: 32.00 W, Rated voltage: 220…240 V, Operating mode: KVG/VVG, Mains voltage, Power consumption of conventional lamp: 125 W, Rated current: 140 mA, Type of current: Alternating current (AC), Inrush current: 7.3 A, Operating frequency: 50/60 Hz, Mains frequency: 50/60 Hz, Max. Number of lamps on LS switch B10 A: 13, Max. Number of lamps on LS switch B10 A - KVG/VVG without compensation: 19, Max. Number of lamps on LS switch B10 A - KVG/VVG with compensation: 5, Max. Number of lamps on LS switch B16 A: 17, Max. Number of lamps on LS switch B16 A - KVG/VVG without compensation: 26, Max. Number of lamps on LS switch B16 A - KVG/VVG with compensation: 7, Harmonic content: 10 %, Power factor: > 0.90, Impulse voltage strength (L – N): 2 kVPhotometric data: Luminous flux: 6000 lm, Rated luminous flux 90°: 6000 lm, Luminous efficacy: 187 lm/W, Luminous flux maintenance at the end of the rated life: 0.70, Light color (designation): Cool white, Color temperature: 4000 K, Color rendering index Ra: 80, Light color: 840, Standard deviation of color matching: ?6 sdcm, Rated LLMF at 6,000 h: 0.80, Flicker measurement value (Pst LM): 1, Measurement value for stroboscopic effects (SVM): 0.4Lighting data: Emission angle: 360 °, Warm-up time (60 %): ‹ 0.50 s, Start time: < 0.5 sDimensions & Weight: Overall length: 202.00 mm, Diameter: 90.00 mm, Maximum diameter: 90 mm, Product weight: 170.00 gTemperatures & Operating Conditions: Ambient temperature range: -20…+50 °C, Maximum temperature at the measurement point tc: 90 °CService life: Service life L70/B50 at 25 °C: 25000 h, Number of switching cycles: 100000, Luminous flux maintenance at the end of maintenance: 0.70, Rated lamp survival factor at 6,000 h: ? 0.90Additional product data: Base (standard designation): E40, Mercury content of the lamp: 0.0 mg, Mercury-free: Yes, Product note: Available from April 2026Application possibilities: Dimmable: NoCertificates & Standards: Energy efficiency class: B, Energy consumption: 32.00 kWh/1000h, Degree of protection: IP65, Standards: CE; UKCA; EAC; ENEC, Photobiological risk group according to EN62778: RG1Country-specific information: Order number: HQL LED FIL V 6LOGISTIC DATA: Storage temperature range: -20…+80 °CData according to the Regulation on Energy Efficiency Labeling EU 2019/2015: Used lighting technology: LED, Non-directional or directional light: NDLS, Mains voltage / Not directly connected to the mains voltage: MLS, Base of the light source (or other electrical interface): E40, Networked light source (CLS): No, Color-adjustable light source: No, Enclosure: No, Light source with high luminous density: No, Anti-glare shield: No, Similar color temperature: SINGLE_VALUE, Indication of whether equivalent power consumption: No, L