Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring possible with included junction box. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole connection terminal included. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Separate DC-Twistlock cable extension availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 155.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on fuse switch C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 4320 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 1195.0 mm, Height: 11.00 mm, Width: 295.00 mm, Product weight: 3000.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screw-less connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 1185 mm, Installation width: 285 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, Electronic control gear - Output ripple current: 3.0 %, Electronic control gear - Length: 119.0 mm, Electronic control gear - Width: 45 mm, Electronic control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications on cent

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button connection terminal. Through-wiring possible with included junction box. Energy saving thanks to high system light output: up to 130 lm/W. Good anti-glare (UGR < 19). High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole connection terminal, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole connection terminal included. Safety cable for light fittings included. Safety clamps pre-installed. External control gear included. Separate DC-Twistlock cable extension availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 33.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 155.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on fuse switch C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 4320 lm, Light output: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 1195.0 mm, Height: 11.00 mm, Width: 295.00 mm, Product weight: 3000.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screw-less connection terminal, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 1185 mm, Installation width: 285 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, Electronic control gear - output ripple current: 3.0 %, Electronic control gear - length: 119.0 mm, Electronic control gear - width: 45 mm, Electronic control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz /

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button terminal block. Through-wiring with included junction box possible. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 28.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 130.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 110 °, UGR: < 22Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Screwless terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 620 mA, Electronic control gear - output ripple current: 3.0 %, Electronic control gear - length: 119.0 mm, Electronic control gear - width: 45 mm, Electronic control gear - height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of emergency operation test: none, Power in emergency operation: 5 W, Light st

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Tool-free electrical connection thanks to push-button terminal block. Through-wiring possible with included junction box. Energy saving thanks to high system luminous efficacy: up to 130 lm/W. Good glare control (UGR < 19). High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Suitable for emergency lightingProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Versions with CRI 90 available. Frame made of extruded aluminum. Polystyrene diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or its service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 28.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 130.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Impulse voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 3640 lm, Luminous efficacy: 130 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): <1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620.00 mm, Height: 32.00 mm, Width: 620.00 mm, Product weight: 1750.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Material of the light-emitting surface: Polystyrene, Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Mounting location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 48000 h, Number of switching cycles: 50000Control gear: Output current: 620 mA, Electronic control gear - Output ripple current: 3.0 %, Electronic control gear - Length: 119.0 mm, Electronic control gear - Width: 45 mm, Electronic control gear - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for applications with central batteries integrated, Type of

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. High lumen output of up to 5220 lm. Energy saving thanks to high system light output: up to 160 lm/W. High color consistency with SDCM 3. Good anti-glare (UGR < 19). External driver for extended flexibility and easy installation. Flicker-free light thanks to special electronic control gear. Tool-free electrical connection thanks to push-button terminal block. Loop-through wiring possible with included junction box. Decentralized emergency lighting possible with separately available LEDVANCE Emergency Conversion Box. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versionsProduct properties: IoT-enabled light fitting with Zigbee 3.0 technology. Suitable for use with central battery systems according to EN60598-2-22. Service life (L80/B10): 100,000 h (at 25 °C), (L90/B10): 50,000 h (at 25 °C). 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Frame made of extruded aluminum, metal housing. Polystyrene diffuserTechnical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear included. Serviceable light fitting: Upgrades and spare parts availableSafety instructions: All electrical connections must only be carried out by qualified personnel. If the outer flexible cable of this light fitting is damaged, it may only be replaced by a special cable or by a cable that is exclusively available from the manufacturer or his service representative. Caution, risk of electric shock. The light fittings are not intended to be covered with heat-insulating material.Electrical data: Rated power: 32.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 150.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 47.2 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on circuit breaker C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: 0.95, Harmonic content: < 7 %, Protection class: II, Surge voltage resistance (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 5160 lm, Light output: 155 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 2050.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Aluminum, Cover material: Polystyrene (PS), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP40/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-enabled: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 620 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 100000 h, Service life L90/B10 at 25 °C: 59000 h, Number of switching cycles: 50000Control gear: Output current: 750 mA, SMPS - Output ripple current: 3.0 %, SMPS - Length: 119.0 mm, SMPS - Width: 45 mm, SMPS - Height: 25 mmEmergency

Product advantages: Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Suitable for applications where a higher degree of protection is required. High luminous flux of up to 5040 lm. Tool-free electrical connection thanks to push-button terminal block. Through-wiring with included junction box possible. Energy saving thanks to high system luminous efficacy: up to 140 lm/W. High color consistency with SDCM 3. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. External driver for extended flexibility and easy installation. Easy cleaning of the front side thanks to the smooth PMMA diffuserProduct properties: IoT-capable light fitting with Zigbee 3.0 technology. Degree of protection: IP54 (front side), IP20 (back side). Steel sheet housing with recess on the back for the driver to enable a total height of 34 mm. PMMA diffuser. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L90/B10): 50,000 h (at 25° C). Panel can be equipped with optical sensors upon individual requestTechnical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety terminals pre-installed. External control gear included. Special mounting frame with a total height of only 50 mm available separatelySafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material.Electrical data: Rated power: 36.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 165.000 mA, Inrush current: 60 A, Inrush current duration Th50: 2.72 µs, Max. number of light fittings circuit breaker B16: 12, Max. number of light fittings on circuit breaker C10 A: 10, Max. number of light fittings circuit breaker C16: 16, Power factor ?: > 0.90, Harmonic content: < 20 %, Protection class: II, Impulse voltage strength (L – N): 1000 V, Operating mode: External LED driverPhotometric data: Luminous flux: 5040 lm, Total luminous flux of the included light sources: 6000 lm, Luminous efficacy: 140 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: > 80, Standard deviation of color matching: 3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): < 1, Measurement value for stroboscopic effects (SVM): < 0.4, Photobiological risk group according to EN62778: RG0, Radiation angle: 120 °, UGR: < 22Dimensions & Weight: Length: 620 mm, Height: 34.00 mm, Width: 620.00 mm, Product weight: 2200.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Steel, Cover material: Polymethyl methacrylate (PMMA), Material of the light-emitting surface: Acrylic glass (PMMA), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -10…+50 °C, Storage temperature range: -20…+70 °C, Connection type: Tool-free terminal block, 3-pole (L, N, PE), Degree of protection: IP54/IP20, Protection class IK (impact resistance grade): IK02, Dimmable: Yes, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Installation location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 50000 h, Number of switching cycles: 100000Control gear: Output current: 600…1200 mA, Switching Power Supply - Output ripple current: < 5 %, Switching Power Supply - Length: 119.0 mm, Switching Power Supply - Width: 45 mm, Switching Power Supply - Height: 25 mmEmergency lighting: Type of emergency light function (EL): EL certified driver (0Hz

"Product advantages: Easy upgradeability of light source and driver (EVERLOOP design). Homogeneous light distribution and reduced glare (UGR ≤ 19) thanks to IndiviLED® optics. High technical performance with Ra 90 and up to 140 lm/W. Suitable light fitting for DIRECT EASY / VIVARES Zigbee and other Zigbee 3.0 lighting management systems. Extended services such as power consumption monitoring and remote maintenance possible with Zigbee versions. High color consistency with SDCM 3. External driver for extended flexibility and easy installation. Through-wiring with included junction box possible. Various mounting options thanks to different accessories. Suitable for use with central battery systems according to EN 60598-2-22Product properties: Housing made of low-carbon steel, available in white and black. Contains EVERLOOP: Comfortable exchange of light source and LED driver. IoT-capable light fitting with Zigbee 3.0 technology. 5-pole terminal block, cable cross-section up to 5 x 2.5 mm². Service life (L80/B10): 70,000 h (at 25 °C)Technical equipment: Accessories for various installation options available. Junction box with 5-pole terminal block included. Safety cable for light fitting included. External control gear includedSafety instructions: All electrical connections must only be carried out by qualified personnel. Caution, risk of electric shock. The light fittings are not intended for covering with heat-insulating material. The flexible outdoor cable of this light fitting cannot be replaced; if the cable is damaged, the light fitting must be disposed of.Electrical data: Rated power: 38.00 W, Rated voltage: 220…240 V, Mains frequency: 0/50/60 Hz, Rated current: 170.000 mA, Inrush current: 5.24 A, Inrush current duration Th50: 45 µs, Max. number of light fittings circuit breaker B16: 55, Max. number of light fittings on fuse switch C10 A: 34, Max. number of light fittings circuit breaker C16: 55, Power factor ?: > 0.9, Harmonic content: ≤ 20 %, Protection class: II, Operating mode: External LED driverPhotometric data: Luminous flux: 4900 lm, Luminous efficacy: 129 lm/W, Color temperature: 3000 K, Light color (designation): Warm white, Color rendering index Ra: ≥90, Standard deviation of color matching: ≤3 sdcm, Flicker-free: Yes, Flicker measurement value (Pst LM): ≤1, Measurement value for stroboscopic effects (SVM): ≤ 0.4, Photobiological risk group according to EN62778: RG1, Photobiological risk group according to EN62471: RG1, Radiation angle: 90 °, UGR: < 19Dimensions & Weight: Length: 620.00 mm, Height: 22.00 mm, Width: 620.00 mm, Product weight: 3700.00 gMaterials & Colors: Product color: White, Housing color: White, RAL number: RAL 9003, Housing material: Steel, Cover material: Steel, Material of the light-emitting surface: Polycarbonate (PC), Glow wire test according to IEC 60695-2-12: 650 °C, Mercury content of the lamp: 0.0 mgApplication & Installation: Ambient temperature range: -20…+45 °C, Storage temperature range: -20…+80 °C, Connection type: Tool-less connection, Degree of protection: IP20, Protection class IK (impact resistance grade): IK06, Dimmable: Yes, Type of dimming: ZIGBEE, IoT-capable: Supports Zigbee Data Clusters: 0x0302 (Lighting Asset Management), 0x0702 (Smart Energy: Meter Data), 0x0B04 (Electrical Measurement), Mounting type: Recessed/Suspended/Surface-mounted, Mounting location: Ceiling, Application environment: Indoor applications, Installation length: 600 mm, Installation width: 600 mm, Installation depth: 50 mm, Mechanically adjustable: No, With lamp: Yes, Replaceable light source unit: YesService life: Service life L70/B50 at 25 °C: 100000 h, Service life L80/B10 at 25 °C: 70000 h, Service life L90/B10 at 25 °C: 35000 h, Number of switching cycles: 50000Control gear: Output current: 800 mA, EVG - Output ripple current: 3.0 %, EVG - Length: 119.0 mm, EVG - Width: 45 mm, EVG - Height: 25 mm, Recommended control gear: DR ZIGBEE NF P 45W 220-240V 1A2Emergency lighting: Type of emergency light function (EL): EL certified driver (0Hz / DC) for