Niko NIKO Original White - COVERPL 1GANG WHITE

Description Rocker for single push-button with transparent text field. You can easily add a short label or symbols to the transparent text field. Color: white. Specification Central plate for electronic single switch or push-button, white. The button and the center disc (edge) form a unit. The central plate is equipped with a transparent text field where you can apply simple short markings or symbols. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering work, the cover remains tightly attached to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks bridge a clearance of 1 to 1.2 mm

Description This button is used for the installation of a single-pole, double-pole, two-way or intermediate switch or for a push button. With this button, you can operate a light point.Color: white.Specification Central plate for electronic single-pole switch or push button, white. The button and the central disc (edge) form a unit. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering work, the cover is always tightly attached to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks bridge a clearance of 1 to 1.2 mm

Complete device (mechanical assembly and finishing set) for a socket outlet with earth pin and safety shutter. This socket outlet has a flush-mounting depth of 21mm. Colour: White.

Compound outlet (base and central plate) in Niko Original White is without earthing. The base is equipped with screw terminals and claw fixing. The socket outlet also has a safety shutter and a flush-mounting depth of 21mm....

Description The central plate is attached to a flush-mounted socket with a combination screw head (PZ 1-slot 1 x 5.5 mm). This central plate is surrounded by a flat edge, which is provided with a rectangular opening at all four corners, each containing a multi-positional snap hook. The construction of the central plate ensures that the frame is always flat against the wall, even if the plastering is not done neatly. white. Specification Central plate for socket with protective contact and integrated raised touch protection, white. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positional snap hook. The design of the central plate ensures that, even if the plastering is not done carefully, the cover can always be mounted close to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted socket protrudes from the plaster, the multi-positional snap hooks bridge a clearance of 1 to 1.2 mm

SpecificationDimensions (HxWxD): 73 x 73 x 407 mmCertifications: ÖVE, KEMA, VDE, SEMKOSocket for protected socket-outlet, installation depth 28,5 mm 16 A/250 Vac, push-in terminals. The connection terminals are equipped with push-in terminals to clamp the wires. The wall socket has a high-quality brass edge grounding. All connection terminals are located on the top of the base and are suitable for accommodating 2 single conductors (2,5 mm²). The stripping length (14 mm) of the wires is permanently marked on the back of the base. For mounting in a flush-mounted box with gripping surfaces, claws are used, which are tightened using screws with universal screw head (Pz2 or slot 1 x 5,5 mm). The claws, which have a gripping depth of 23,5 mm, return to their original position when unscrewed. The mounting frame has a metal thickness of 1 mm and is brightly galvanized on all sides after cutting, including the cut edges. On horizontal and vertical axes, the mounting frame has 4 screw slots for screw mounting in flush-mounted boxes. These screw slots have a screw hole with a diameter of 7 mm. For mounting on panels, the mounting frame is equipped with 4 screw holes (marked with a screw symbol) with a diameter of 3 mm. The center of the mounting frame is marked both in the horizontal and vertical direction (guide line, laser ...) so that the mounting of one or more mechanisms can be carried out quickly and easily. On all sides, the base has folded swallowtails, making it possible to quickly and smoothly connect several bases both horizontally and vertically (center distance 71 x 71 mm). The folded edges on the outside of the base and the continuation inward provide additional robustness. The 4 rectangular openings (7 x 2,5 mm) in the mounting frame can, if the flush-mounted box protrudes from the plaster, bridge a clearance of 1 to 1,2 mm. With such a clearance, the cover can still fit snugly against the wall.Degree of Protection: The assembly of a mechanism, a central plate, and a cover is protected to degree of protection IP41.Installation depth: 28,5 mmCertifications: ÖVE, KEMA, VDECentral plate for protected socket-outlet with integrated raised touch protection, white. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering, the cover can always be mounted flush against the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks can bridge a clearance of 1 to 1,2 mm