Niko NIKO Hydro - HYDRO BOX 1GANG 2 ENTR W

Description This button is used for the installation of a single-pole, double-pole, two-way or intermediate switch or for a push button. With this button, you can operate a light point.Color: white.Specification Central plate for electronic single-pole switch or push button, white. The button and the central disc (edge) form a unit. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positionable snap hook. The design of the central plate ensures that, in case of careless plastering work, the cover is always tightly attached to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted box protrudes from the plaster, the multi-positionable snap hooks bridge a clearance of 1 to 1.2 mm

Description The central plate is attached to a flush-mounted socket with a combination screw head (PZ 1-slot 1 x 5.5 mm). This central plate is surrounded by a flat edge, which is provided with a rectangular opening at all four corners, each containing a multi-positional snap hook. The construction of the central plate ensures that the frame is always flat against the wall, even if the plastering is not done neatly. white. Specification Central plate for socket with protective contact and integrated raised touch protection, white. The central plate is surrounded by a flat edge, which has a rectangular opening at all 4 corners, each containing a multi-positional snap hook. The design of the central plate ensures that, even if the plastering is not done carefully, the cover can always be mounted close to the wall thanks to the snap hooks. This works in two directions: If the flush-mounted socket protrudes from the plaster, the multi-positional snap hooks bridge a clearance of 1 to 1.2 mm

Description 1-gang frame from the Niko Original series. Color of the frame: Niko Original white. Specification 1-gang frame Niko Original white. Simple frame for one mechanism. The entire frame is self-extinguishing (withstands a glow wire test of 650°C) and halogen-free. The frame consists of distortion-resistant polycarbonate and acrylonitrile styrene acrylate materials.Color: white (uniformly colored, approximately RAL9010)Height: max. 8,5 mmDimensions (HxWxD): 83 x 83 x 8,9 mmCertification marks: CEBEC, ÖVE, KEMA, VDE, NF, SEMKOMarking: CE

Description Mechanism for socket outlet with protective contact, claw mounting and integrated enhanced touch protection. The connection terminals are equipped with push-in terminals to clamp the wires. This socket has an installation depth of 28.5 mm. Central plate and frame in the color of your choice must be ordered separately. Specification Base for socket outlet with protective contact, installation depth 28.5 mm 16 A/250 Vac, push-in terminals. The connection terminals are equipped with push-in terminals to clamp the wires. The wall socket has a ground connection made of high-quality brass. All connection terminals are located on the base top and are suitable for accommodating 2 single wires (2.5 mm²). The stripping length (14 mm) of the wires is permanently marked on the base back. Claws are used for mounting in a flush-mounted box with gripping surfaces, which are tightened using screws with universal screw head (Pz2 or slot 1 x 5.5 mm). The claws, which have a grip depth of 23.5 mm, return to their original position when unscrewed. The installation frame has a metal thickness of 1 mm and is brightly galvanized on all sides after cutting, including on the cut edges. At the height of the horizontal and vertical axes, the installation frame has 4 screw slots for screw mounting in flush-mounted boxes. These screw slots have a screw hole with a diameter of 7 mm. For mounting on panels, the installation frame is equipped with 4 screw holes (marked with a screw symbol) with a diameter of 3 mm. The center of the installation frame is marked both in the horizontal and vertical direction (guide line, laser ...) so that the installation of one or more mechanisms can be carried out quickly and easily. On all sides, the base has folded swallowtails, making it possible to quickly and smoothly connect several bases both horizontally and vertically (center-to-center distance 71 x 71 mm). The folded edges on the outside of the base as well as the continuation inward provide additional robustness. The 4 rectangular openings (7 x 2.5 mm) in the installation frame can bridge a clearance of 1 to 1.2 mm if the flush-mounted box protrudes from the plaster. With such a clearance, the cover can still fit snugly against the wall. Degree of protection: The assembly of a mechanism, a central plate and a cover is protected to degree of protection IP41. Installation depth: 28.5 mm Test mark: ÖVE, KEMA, VDE